Hacked By AnonymousFox
# $Id$
# vim: ts=8:sw=4:et
#
# Copyright (c) 1994-2012 Tim Bunce Ireland
#
# See COPYRIGHT section in pod text below for usage and distribution rights.
#
package DBI;
require 5.008_001;
BEGIN {
our $XS_VERSION = our $VERSION = "1.641"; # ==> ALSO update the version in the pod text below!
$VERSION = eval $VERSION;
}
=head1 NAME
DBI - Database independent interface for Perl
=head1 SYNOPSIS
use DBI;
@driver_names = DBI->available_drivers;
%drivers = DBI->installed_drivers;
@data_sources = DBI->data_sources($driver_name, \%attr);
$dbh = DBI->connect($data_source, $username, $auth, \%attr);
$rv = $dbh->do($statement);
$rv = $dbh->do($statement, \%attr);
$rv = $dbh->do($statement, \%attr, @bind_values);
$ary_ref = $dbh->selectall_arrayref($statement);
$hash_ref = $dbh->selectall_hashref($statement, $key_field);
$ary_ref = $dbh->selectcol_arrayref($statement);
$ary_ref = $dbh->selectcol_arrayref($statement, \%attr);
@row_ary = $dbh->selectrow_array($statement);
$ary_ref = $dbh->selectrow_arrayref($statement);
$hash_ref = $dbh->selectrow_hashref($statement);
$sth = $dbh->prepare($statement);
$sth = $dbh->prepare_cached($statement);
$rc = $sth->bind_param($p_num, $bind_value);
$rc = $sth->bind_param($p_num, $bind_value, $bind_type);
$rc = $sth->bind_param($p_num, $bind_value, \%attr);
$rv = $sth->execute;
$rv = $sth->execute(@bind_values);
$rv = $sth->execute_array(\%attr, ...);
$rc = $sth->bind_col($col_num, \$col_variable);
$rc = $sth->bind_columns(@list_of_refs_to_vars_to_bind);
@row_ary = $sth->fetchrow_array;
$ary_ref = $sth->fetchrow_arrayref;
$hash_ref = $sth->fetchrow_hashref;
$ary_ref = $sth->fetchall_arrayref;
$ary_ref = $sth->fetchall_arrayref( $slice, $max_rows );
$hash_ref = $sth->fetchall_hashref( $key_field );
$rv = $sth->rows;
$rc = $dbh->begin_work;
$rc = $dbh->commit;
$rc = $dbh->rollback;
$quoted_string = $dbh->quote($string);
$rc = $h->err;
$str = $h->errstr;
$rv = $h->state;
$rc = $dbh->disconnect;
I<The synopsis above only lists the major methods and parameters.>
=head2 GETTING HELP
=head3 General
Before asking any questions, reread this document, consult the
archives and read the DBI FAQ. The archives are listed
at the end of this document and on the DBI home page L<http://dbi.perl.org/support/>
You might also like to read the Advanced DBI Tutorial at
L<http://www.slideshare.net/Tim.Bunce/dbi-advanced-tutorial-2007>
To help you make the best use of the dbi-users mailing list,
and any other lists or forums you may use, I recommend that you read
"Getting Answers" by Mike Ash: L<http://mikeash.com/getting_answers.html>.
=head3 Mailing Lists
If you have questions about DBI, or DBD driver modules, you can get
help from the I<dbi-users@perl.org> mailing list. This is the best way to get
help. You don't have to subscribe to the list in order to post, though I'd
recommend it. You can get help on subscribing and using the list by emailing
I<dbi-users-help@perl.org>.
Please note that Tim Bunce does not maintain the mailing lists or the
web pages (generous volunteers do that). So please don't send mail
directly to him; he just doesn't have the time to answer questions
personally. The I<dbi-users> mailing list has lots of experienced
people who should be able to help you if you need it. If you do email
Tim he is very likely to just forward it to the mailing list.
=head3 IRC
DBI IRC Channel: #dbi on irc.perl.org (L<irc://irc.perl.org/#dbi>)
=for html <a href="http://chat.mibbit.com/#dbi@irc.perl.org">(click for instant chatroom login)</a>
=head3 Online
StackOverflow has a DBI tag L<http://stackoverflow.com/questions/tagged/dbi>
with over 800 questions.
The DBI home page at L<http://dbi.perl.org/> and the DBI FAQ
at L<http://faq.dbi-support.com/> may be worth a visit.
They include links to other resources, but I<are rather out-dated>.
=head3 Reporting a Bug
If you think you've found a bug then please read
"How to Report Bugs Effectively" by Simon Tatham:
L<http://www.chiark.greenend.org.uk/~sgtatham/bugs.html>.
If you think you've found a memory leak then read L</Memory Leaks>.
Your problem is most likely related to the specific DBD driver module you're
using. If that's the case then click on the 'Bugs' link on the L<http://metacpan.org>
page for your driver. Only submit a bug report against the DBI itself if you're
sure that your issue isn't related to the driver you're using.
=head2 NOTES
This is the DBI specification that corresponds to DBI version 1.641
(see L<DBI::Changes> for details).
The DBI is evolving at a steady pace, so it's good to check that
you have the latest copy.
The significant user-visible changes in each release are documented
in the L<DBI::Changes> module so you can read them by executing
C<perldoc DBI::Changes>.
Some DBI changes require changes in the drivers, but the drivers
can take some time to catch up. Newer versions of the DBI have
added features that may not yet be supported by the drivers you
use. Talk to the authors of your drivers if you need a new feature
that is not yet supported.
Features added after DBI 1.21 (February 2002) are marked in the
text with the version number of the DBI release they first appeared in.
Extensions to the DBI API often use the C<DBIx::*> namespace.
See L</Naming Conventions and Name Space>. DBI extension modules
can be found at L<https://metacpan.org/search?q=DBIx>. And all modules
related to the DBI can be found at L<https://metacpan.org/search?q=DBI>.
=cut
# The POD text continues at the end of the file.
use Scalar::Util ();
use Carp();
use DynaLoader ();
use Exporter ();
BEGIN {
@ISA = qw(Exporter DynaLoader);
# Make some utility functions available if asked for
@EXPORT = (); # we export nothing by default
@EXPORT_OK = qw(%DBI %DBI_methods hash); # also populated by export_ok_tags:
%EXPORT_TAGS = (
sql_types => [ qw(
SQL_GUID
SQL_WLONGVARCHAR
SQL_WVARCHAR
SQL_WCHAR
SQL_BIGINT
SQL_BIT
SQL_TINYINT
SQL_LONGVARBINARY
SQL_VARBINARY
SQL_BINARY
SQL_LONGVARCHAR
SQL_UNKNOWN_TYPE
SQL_ALL_TYPES
SQL_CHAR
SQL_NUMERIC
SQL_DECIMAL
SQL_INTEGER
SQL_SMALLINT
SQL_FLOAT
SQL_REAL
SQL_DOUBLE
SQL_DATETIME
SQL_DATE
SQL_INTERVAL
SQL_TIME
SQL_TIMESTAMP
SQL_VARCHAR
SQL_BOOLEAN
SQL_UDT
SQL_UDT_LOCATOR
SQL_ROW
SQL_REF
SQL_BLOB
SQL_BLOB_LOCATOR
SQL_CLOB
SQL_CLOB_LOCATOR
SQL_ARRAY
SQL_ARRAY_LOCATOR
SQL_MULTISET
SQL_MULTISET_LOCATOR
SQL_TYPE_DATE
SQL_TYPE_TIME
SQL_TYPE_TIMESTAMP
SQL_TYPE_TIME_WITH_TIMEZONE
SQL_TYPE_TIMESTAMP_WITH_TIMEZONE
SQL_INTERVAL_YEAR
SQL_INTERVAL_MONTH
SQL_INTERVAL_DAY
SQL_INTERVAL_HOUR
SQL_INTERVAL_MINUTE
SQL_INTERVAL_SECOND
SQL_INTERVAL_YEAR_TO_MONTH
SQL_INTERVAL_DAY_TO_HOUR
SQL_INTERVAL_DAY_TO_MINUTE
SQL_INTERVAL_DAY_TO_SECOND
SQL_INTERVAL_HOUR_TO_MINUTE
SQL_INTERVAL_HOUR_TO_SECOND
SQL_INTERVAL_MINUTE_TO_SECOND
) ],
sql_cursor_types => [ qw(
SQL_CURSOR_FORWARD_ONLY
SQL_CURSOR_KEYSET_DRIVEN
SQL_CURSOR_DYNAMIC
SQL_CURSOR_STATIC
SQL_CURSOR_TYPE_DEFAULT
) ], # for ODBC cursor types
utils => [ qw(
neat neat_list $neat_maxlen dump_results looks_like_number
data_string_diff data_string_desc data_diff sql_type_cast
DBIstcf_DISCARD_STRING
DBIstcf_STRICT
) ],
profile => [ qw(
dbi_profile dbi_profile_merge dbi_profile_merge_nodes dbi_time
) ], # notionally "in" DBI::Profile and normally imported from there
);
$DBI::dbi_debug = 0; # mixture of bit fields and int sub-fields
$DBI::neat_maxlen = 1000;
$DBI::stderr = 2_000_000_000; # a very round number below 2**31
# If you get an error here like "Can't find loadable object ..."
# then you haven't installed the DBI correctly. Read the README
# then install it again.
if ( $ENV{DBI_PUREPERL} ) {
eval { bootstrap DBI $XS_VERSION } if $ENV{DBI_PUREPERL} == 1;
require DBI::PurePerl if $@ or $ENV{DBI_PUREPERL} >= 2;
$DBI::PurePerl ||= 0; # just to silence "only used once" warnings
}
else {
bootstrap DBI $XS_VERSION;
}
$EXPORT_TAGS{preparse_flags} = [ grep { /^DBIpp_\w\w_/ } keys %{__PACKAGE__."::"} ];
Exporter::export_ok_tags(keys %EXPORT_TAGS);
}
# Alias some handle methods to also be DBI class methods
for (qw(trace_msg set_err parse_trace_flag parse_trace_flags)) {
no strict;
*$_ = \&{"DBD::_::common::$_"};
}
use strict;
DBI->trace(split /=/, $ENV{DBI_TRACE}, 2) if $ENV{DBI_TRACE};
$DBI::connect_via ||= "connect";
# check if user wants a persistent database connection ( Apache + mod_perl )
if ($INC{'Apache/DBI.pm'} && $ENV{MOD_PERL}) {
$DBI::connect_via = "Apache::DBI::connect";
DBI->trace_msg("DBI connect via $DBI::connect_via in $INC{'Apache/DBI.pm'}\n");
}
%DBI::installed_drh = (); # maps driver names to installed driver handles
sub installed_drivers { %DBI::installed_drh }
%DBI::installed_methods = (); # XXX undocumented, may change
sub installed_methods { %DBI::installed_methods }
# Setup special DBI dynamic variables. See DBI::var::FETCH for details.
# These are dynamically associated with the last handle used.
tie $DBI::err, 'DBI::var', '*err'; # special case: referenced via IHA list
tie $DBI::state, 'DBI::var', '"state'; # special case: referenced via IHA list
tie $DBI::lasth, 'DBI::var', '!lasth'; # special case: return boolean
tie $DBI::errstr, 'DBI::var', '&errstr'; # call &errstr in last used pkg
tie $DBI::rows, 'DBI::var', '&rows'; # call &rows in last used pkg
sub DBI::var::TIESCALAR{ my $var = $_[1]; bless \$var, 'DBI::var'; }
sub DBI::var::STORE { Carp::croak("Can't modify \$DBI::${$_[0]} special variable") }
# --- Driver Specific Prefix Registry ---
my $dbd_prefix_registry = {
ad_ => { class => 'DBD::AnyData', },
ad2_ => { class => 'DBD::AnyData2', },
ado_ => { class => 'DBD::ADO', },
amzn_ => { class => 'DBD::Amazon', },
best_ => { class => 'DBD::BestWins', },
csv_ => { class => 'DBD::CSV', },
cubrid_ => { class => 'DBD::cubrid', },
db2_ => { class => 'DBD::DB2', },
dbi_ => { class => 'DBI', },
dbm_ => { class => 'DBD::DBM', },
df_ => { class => 'DBD::DF', },
examplep_ => { class => 'DBD::ExampleP', },
f_ => { class => 'DBD::File', },
file_ => { class => 'DBD::TextFile', },
go_ => { class => 'DBD::Gofer', },
ib_ => { class => 'DBD::InterBase', },
ing_ => { class => 'DBD::Ingres', },
ix_ => { class => 'DBD::Informix', },
jdbc_ => { class => 'DBD::JDBC', },
mariadb_ => { class => 'DBD::MariaDB', },
mem_ => { class => 'DBD::Mem', },
mo_ => { class => 'DBD::MO', },
monetdb_ => { class => 'DBD::monetdb', },
msql_ => { class => 'DBD::mSQL', },
mvsftp_ => { class => 'DBD::MVS_FTPSQL', },
mysql_ => { class => 'DBD::mysql', },
multi_ => { class => 'DBD::Multi' },
mx_ => { class => 'DBD::Multiplex', },
neo_ => { class => 'DBD::Neo4p', },
nullp_ => { class => 'DBD::NullP', },
odbc_ => { class => 'DBD::ODBC', },
ora_ => { class => 'DBD::Oracle', },
pg_ => { class => 'DBD::Pg', },
pgpp_ => { class => 'DBD::PgPP', },
plb_ => { class => 'DBD::Plibdata', },
po_ => { class => 'DBD::PO', },
proxy_ => { class => 'DBD::Proxy', },
ram_ => { class => 'DBD::RAM', },
rdb_ => { class => 'DBD::RDB', },
sapdb_ => { class => 'DBD::SAP_DB', },
snmp_ => { class => 'DBD::SNMP', },
solid_ => { class => 'DBD::Solid', },
spatialite_ => { class => 'DBD::Spatialite', },
sponge_ => { class => 'DBD::Sponge', },
sql_ => { class => 'DBI::DBD::SqlEngine', },
sqlite_ => { class => 'DBD::SQLite', },
syb_ => { class => 'DBD::Sybase', },
sys_ => { class => 'DBD::Sys', },
tdat_ => { class => 'DBD::Teradata', },
tmpl_ => { class => 'DBD::Template', },
tmplss_ => { class => 'DBD::TemplateSS', },
tree_ => { class => 'DBD::TreeData', },
tuber_ => { class => 'DBD::Tuber', },
uni_ => { class => 'DBD::Unify', },
vt_ => { class => 'DBD::Vt', },
wmi_ => { class => 'DBD::WMI', },
x_ => { }, # for private use
xbase_ => { class => 'DBD::XBase', },
xmlsimple_ => { class => 'DBD::XMLSimple', },
xl_ => { class => 'DBD::Excel', },
yaswi_ => { class => 'DBD::Yaswi', },
};
my %dbd_class_registry = map { $dbd_prefix_registry->{$_}->{class} => { prefix => $_ } }
grep { exists $dbd_prefix_registry->{$_}->{class} }
keys %{$dbd_prefix_registry};
sub dump_dbd_registry {
require Data::Dumper;
local $Data::Dumper::Sortkeys=1;
local $Data::Dumper::Indent=1;
print Data::Dumper->Dump([$dbd_prefix_registry], [qw($dbd_prefix_registry)]);
}
# --- Dynamically create the DBI Standard Interface
my $keeperr = { O=>0x0004 };
%DBI::DBI_methods = ( # Define the DBI interface methods per class:
common => { # Interface methods common to all DBI handle classes
'DESTROY' => { O=>0x004|0x10000 },
'CLEAR' => $keeperr,
'EXISTS' => $keeperr,
'FETCH' => { O=>0x0404 },
'FETCH_many' => { O=>0x0404 },
'FIRSTKEY' => $keeperr,
'NEXTKEY' => $keeperr,
'STORE' => { O=>0x0418 | 0x4 },
'DELETE' => { O=>0x0404 },
can => { O=>0x0100 }, # special case, see dispatch
debug => { U =>[1,2,'[$debug_level]'], O=>0x0004 }, # old name for trace
dump_handle => { U =>[1,3,'[$message [, $level]]'], O=>0x0004 },
err => $keeperr,
errstr => $keeperr,
state => $keeperr,
func => { O=>0x0006 },
parse_trace_flag => { U =>[2,2,'$name'], O=>0x0404, T=>8 },
parse_trace_flags => { U =>[2,2,'$flags'], O=>0x0404, T=>8 },
private_data => { U =>[1,1], O=>0x0004 },
set_err => { U =>[3,6,'$err, $errmsg [, $state, $method, $rv]'], O=>0x0010 },
trace => { U =>[1,3,'[$trace_level, [$filename]]'], O=>0x0004 },
trace_msg => { U =>[2,3,'$message_text [, $min_level ]' ], O=>0x0004, T=>8 },
swap_inner_handle => { U =>[2,3,'$h [, $allow_reparent ]'] },
private_attribute_info => { },
visit_child_handles => { U => [2,3,'$coderef [, $info ]'], O=>0x0404, T=>4 },
},
dr => { # Database Driver Interface
'connect' => { U =>[1,5,'[$db [,$user [,$passwd [,\%attr]]]]'], H=>3, O=>0x8000, T=>0x200 },
'connect_cached'=>{U=>[1,5,'[$db [,$user [,$passwd [,\%attr]]]]'], H=>3, O=>0x8000, T=>0x200 },
'disconnect_all'=>{ U =>[1,1], O=>0x0800, T=>0x200 },
data_sources => { U =>[1,2,'[\%attr]' ], O=>0x0800, T=>0x200 },
default_user => { U =>[3,4,'$user, $pass [, \%attr]' ], T=>0x200 },
dbixs_revision => $keeperr,
},
db => { # Database Session Class Interface
data_sources => { U =>[1,2,'[\%attr]' ], O=>0x0200 },
take_imp_data => { U =>[1,1], O=>0x10000 },
clone => { U =>[1,2,'[\%attr]'], T=>0x200 },
connected => { U =>[1,0], O => 0x0004, T=>0x200, H=>3 },
begin_work => { U =>[1,2,'[ \%attr ]'], O=>0x0400, T=>0x1000 },
commit => { U =>[1,1], O=>0x0480|0x0800, T=>0x1000 },
rollback => { U =>[1,1], O=>0x0480|0x0800, T=>0x1000 },
'do' => { U =>[2,0,'$statement [, \%attr [, @bind_params ] ]'], O=>0x3200 },
last_insert_id => { U =>[5,6,'$catalog, $schema, $table_name, $field_name [, \%attr ]'], O=>0x2800 },
preparse => { }, # XXX
prepare => { U =>[2,3,'$statement [, \%attr]'], O=>0xA200 },
prepare_cached => { U =>[2,4,'$statement [, \%attr [, $if_active ] ]'], O=>0xA200 },
selectrow_array => { U =>[2,0,'$statement [, \%attr [, @bind_params ] ]'], O=>0x2000 },
selectrow_arrayref=>{U =>[2,0,'$statement [, \%attr [, @bind_params ] ]'], O=>0x2000 },
selectrow_hashref=>{ U =>[2,0,'$statement [, \%attr [, @bind_params ] ]'], O=>0x2000 },
selectall_arrayref=>{U =>[2,0,'$statement [, \%attr [, @bind_params ] ]'], O=>0x2000 },
selectall_array =>{U =>[2,0,'$statement [, \%attr [, @bind_params ] ]'], O=>0x2000 },
selectall_hashref=>{ U =>[3,0,'$statement, $keyfield [, \%attr [, @bind_params ] ]'], O=>0x2000 },
selectcol_arrayref=>{U =>[2,0,'$statement [, \%attr [, @bind_params ] ]'], O=>0x2000 },
ping => { U =>[1,1], O=>0x0404 },
disconnect => { U =>[1,1], O=>0x0400|0x0800|0x10000, T=>0x200 },
quote => { U =>[2,3, '$string [, $data_type ]' ], O=>0x0430, T=>2 },
quote_identifier=> { U =>[2,6, '$name [, ...] [, \%attr ]' ], O=>0x0430, T=>2 },
rows => $keeperr,
tables => { U =>[1,6,'$catalog, $schema, $table, $type [, \%attr ]' ], O=>0x2200 },
table_info => { U =>[1,6,'$catalog, $schema, $table, $type [, \%attr ]' ], O=>0x2200|0x8800 },
column_info => { U =>[5,6,'$catalog, $schema, $table, $column [, \%attr ]'],O=>0x2200|0x8800 },
primary_key_info=> { U =>[4,5,'$catalog, $schema, $table [, \%attr ]' ], O=>0x2200|0x8800 },
primary_key => { U =>[4,5,'$catalog, $schema, $table [, \%attr ]' ], O=>0x2200 },
foreign_key_info=> { U =>[7,8,'$pk_catalog, $pk_schema, $pk_table, $fk_catalog, $fk_schema, $fk_table [, \%attr ]' ], O=>0x2200|0x8800 },
statistics_info => { U =>[6,7,'$catalog, $schema, $table, $unique_only, $quick, [, \%attr ]' ], O=>0x2200|0x8800 },
type_info_all => { U =>[1,1], O=>0x2200|0x0800 },
type_info => { U =>[1,2,'$data_type'], O=>0x2200 },
get_info => { U =>[2,2,'$info_type'], O=>0x2200|0x0800 },
},
st => { # Statement Class Interface
bind_col => { U =>[3,4,'$column, \\$var [, \%attr]'] },
bind_columns => { U =>[2,0,'\\$var1 [, \\$var2, ...]'] },
bind_param => { U =>[3,4,'$parameter, $var [, \%attr]'] },
bind_param_inout=> { U =>[4,5,'$parameter, \\$var, $maxlen, [, \%attr]'] },
execute => { U =>[1,0,'[@args]'], O=>0x1040 },
bind_param_array => { U =>[3,4,'$parameter, $var [, \%attr]'] },
bind_param_inout_array => { U =>[4,5,'$parameter, \\@var, $maxlen, [, \%attr]'] },
execute_array => { U =>[2,0,'\\%attribs [, @args]'], O=>0x1040|0x4000 },
execute_for_fetch => { U =>[2,3,'$fetch_sub [, $tuple_status]'], O=>0x1040|0x4000 },
fetch => undef, # alias for fetchrow_arrayref
fetchrow_arrayref => undef,
fetchrow_hashref => undef,
fetchrow_array => undef,
fetchrow => undef, # old alias for fetchrow_array
fetchall_arrayref => { U =>[1,3, '[ $slice [, $max_rows]]'] },
fetchall_hashref => { U =>[2,2,'$key_field'] },
blob_read => { U =>[4,5,'$field, $offset, $len [, \\$buf [, $bufoffset]]'] },
blob_copy_to_file => { U =>[3,3,'$field, $filename_or_handleref'] },
dump_results => { U =>[1,5,'$maxfieldlen, $linesep, $fieldsep, $filehandle'] },
more_results => { U =>[1,1] },
finish => { U =>[1,1] },
cancel => { U =>[1,1], O=>0x0800 },
rows => $keeperr,
_get_fbav => undef,
_set_fbav => { T=>6 },
},
);
while ( my ($class, $meths) = each %DBI::DBI_methods ) {
my $ima_trace = 0+($ENV{DBI_IMA_TRACE}||0);
while ( my ($method, $info) = each %$meths ) {
my $fullmeth = "DBI::${class}::$method";
if (($DBI::dbi_debug & 0xF) == 15) { # quick hack to list DBI methods
# and optionally filter by IMA flags
my $O = $info->{O}||0;
printf "0x%04x %-20s\n", $O, $fullmeth
unless $ima_trace && !($O & $ima_trace);
}
DBI->_install_method($fullmeth, 'DBI.pm', $info);
}
}
{
package DBI::common;
@DBI::dr::ISA = ('DBI::common');
@DBI::db::ISA = ('DBI::common');
@DBI::st::ISA = ('DBI::common');
}
# End of init code
END {
return unless defined &DBI::trace_msg; # return unless bootstrap'd ok
local ($!,$?);
DBI->trace_msg(sprintf(" -- DBI::END (\$\@: %s, \$!: %s)\n", $@||'', $!||''), 2);
# Let drivers know why we are calling disconnect_all:
$DBI::PERL_ENDING = $DBI::PERL_ENDING = 1; # avoid typo warning
DBI->disconnect_all() if %DBI::installed_drh;
}
sub CLONE {
_clone_dbis() unless $DBI::PurePerl; # clone the DBIS structure
DBI->trace_msg("CLONE DBI for new thread\n");
while ( my ($driver, $drh) = each %DBI::installed_drh) {
no strict 'refs';
next if defined &{"DBD::${driver}::CLONE"};
warn("$driver has no driver CLONE() function so is unsafe threaded\n");
}
%DBI::installed_drh = (); # clear loaded drivers so they have a chance to reinitialize
}
sub parse_dsn {
my ($class, $dsn) = @_;
$dsn =~ s/^(dbi):(\w*?)(?:\((.*?)\))?://i or return;
my ($scheme, $driver, $attr, $attr_hash) = (lc($1), $2, $3);
$driver ||= $ENV{DBI_DRIVER} || '';
$attr_hash = { split /\s*=>?\s*|\s*,\s*/, $attr, -1 } if $attr;
return ($scheme, $driver, $attr, $attr_hash, $dsn);
}
sub visit_handles {
my ($class, $code, $outer_info) = @_;
$outer_info = {} if not defined $outer_info;
my %drh = DBI->installed_drivers;
for my $h (values %drh) {
my $child_info = $code->($h, $outer_info)
or next;
$h->visit_child_handles($code, $child_info);
}
return $outer_info;
}
# --- The DBI->connect Front Door methods
sub connect_cached {
# For library code using connect_cached() with mod_perl
# we redirect those calls to Apache::DBI::connect() as well
my ($class, $dsn, $user, $pass, $attr) = @_;
my $dbi_connect_method = ($DBI::connect_via eq "Apache::DBI::connect")
? 'Apache::DBI::connect' : 'connect_cached';
$attr = {
$attr ? %$attr : (), # clone, don't modify callers data
dbi_connect_method => $dbi_connect_method,
};
return $class->connect($dsn, $user, $pass, $attr);
}
sub connect {
my $class = shift;
my ($dsn, $user, $pass, $attr, $old_driver) = my @orig_args = @_;
my $driver;
if ($attr and !ref($attr)) { # switch $old_driver<->$attr if called in old style
Carp::carp("DBI->connect using 'old-style' syntax is deprecated and will be an error in future versions");
($old_driver, $attr) = ($attr, $old_driver);
}
my $connect_meth = $attr->{dbi_connect_method};
$connect_meth ||= $DBI::connect_via; # fallback to default
$dsn ||= $ENV{DBI_DSN} || $ENV{DBI_DBNAME} || '' unless $old_driver;
if ($DBI::dbi_debug) {
local $^W = 0;
pop @_ if $connect_meth ne 'connect';
my @args = @_; $args[2] = '****'; # hide password
DBI->trace_msg(" -> $class->$connect_meth(".join(", ",@args).")\n");
}
Carp::croak('Usage: $class->connect([$dsn [,$user [,$passwd [,\%attr]]]])')
if (ref $old_driver or ($attr and not ref $attr) or
(ref $pass and not defined Scalar::Util::blessed($pass)));
# extract dbi:driver prefix from $dsn into $1
$dsn =~ s/^dbi:(\w*?)(?:\((.*?)\))?://i
or '' =~ /()/; # ensure $1 etc are empty if match fails
my $driver_attrib_spec = $2 || '';
# Set $driver. Old style driver, if specified, overrides new dsn style.
$driver = $old_driver || $1 || $ENV{DBI_DRIVER}
or Carp::croak("Can't connect to data source '$dsn' "
."because I can't work out what driver to use "
."(it doesn't seem to contain a 'dbi:driver:' prefix "
."and the DBI_DRIVER env var is not set)");
my $proxy;
if ($ENV{DBI_AUTOPROXY} && $driver ne 'Proxy' && $driver ne 'Sponge' && $driver ne 'Switch') {
my $dbi_autoproxy = $ENV{DBI_AUTOPROXY};
$proxy = 'Proxy';
if ($dbi_autoproxy =~ s/^dbi:(\w*?)(?:\((.*?)\))?://i) {
$proxy = $1;
$driver_attrib_spec = join ",",
($driver_attrib_spec) ? $driver_attrib_spec : (),
($2 ) ? $2 : ();
}
$dsn = "$dbi_autoproxy;dsn=dbi:$driver:$dsn";
$driver = $proxy;
DBI->trace_msg(" DBI_AUTOPROXY: dbi:$driver($driver_attrib_spec):$dsn\n");
}
# avoid recursion if proxy calls DBI->connect itself
local $ENV{DBI_AUTOPROXY} if $ENV{DBI_AUTOPROXY};
my %attributes; # take a copy we can delete from
if ($old_driver) {
%attributes = %$attr if $attr;
}
else { # new-style connect so new default semantics
%attributes = (
PrintError => 1,
AutoCommit => 1,
ref $attr ? %$attr : (),
# attributes in DSN take precedence over \%attr connect parameter
$driver_attrib_spec ? (split /\s*=>?\s*|\s*,\s*/, $driver_attrib_spec, -1) : (),
);
}
$attr = \%attributes; # now set $attr to refer to our local copy
my $drh = $DBI::installed_drh{$driver} || $class->install_driver($driver)
or die "panic: $class->install_driver($driver) failed";
# attributes in DSN take precedence over \%attr connect parameter
$user = $attr->{Username} if defined $attr->{Username};
$pass = $attr->{Password} if defined $attr->{Password};
delete $attr->{Password}; # always delete Password as closure stores it securely
if ( !(defined $user && defined $pass) ) {
($user, $pass) = $drh->default_user($user, $pass, $attr);
}
$attr->{Username} = $user; # force the Username to be the actual one used
my $connect_closure = sub {
my ($old_dbh, $override_attr) = @_;
#use Data::Dumper;
#warn "connect_closure: ".Data::Dumper::Dumper([$attr,\%attributes, $override_attr]);
my $dbh;
unless ($dbh = $drh->$connect_meth($dsn, $user, $pass, $attr)) {
$user = '' if !defined $user;
$dsn = '' if !defined $dsn;
# $drh->errstr isn't safe here because $dbh->DESTROY may not have
# been called yet and so the dbh errstr would not have been copied
# up to the drh errstr. Certainly true for connect_cached!
my $errstr = $DBI::errstr;
# Getting '(no error string)' here is a symptom of a ref loop
$errstr = '(no error string)' if !defined $errstr;
my $msg = "$class connect('$dsn','$user',...) failed: $errstr";
DBI->trace_msg(" $msg\n");
# XXX HandleWarn
unless ($attr->{HandleError} && $attr->{HandleError}->($msg, $drh, $dbh)) {
Carp::croak($msg) if $attr->{RaiseError};
Carp::carp ($msg) if $attr->{PrintError};
}
$! = 0; # for the daft people who do DBI->connect(...) || die "$!";
return $dbh; # normally undef, but HandleError could change it
}
# merge any attribute overrides but don't change $attr itself (for closure)
my $apply = { ($override_attr) ? (%$attr, %$override_attr ) : %$attr };
# handle basic RootClass subclassing:
my $rebless_class = $apply->{RootClass} || ($class ne 'DBI' ? $class : '');
if ($rebless_class) {
no strict 'refs';
if ($apply->{RootClass}) { # explicit attribute (ie not static method call class)
delete $apply->{RootClass};
DBI::_load_class($rebless_class, 0);
}
unless (@{"$rebless_class\::db::ISA"} && @{"$rebless_class\::st::ISA"}) {
Carp::carp("DBI subclasses '$rebless_class\::db' and ::st are not setup, RootClass ignored");
$rebless_class = undef;
$class = 'DBI';
}
else {
$dbh->{RootClass} = $rebless_class; # $dbh->STORE called via plain DBI::db
DBI::_set_isa([$rebless_class], 'DBI'); # sets up both '::db' and '::st'
DBI::_rebless($dbh, $rebless_class); # appends '::db'
}
}
if (%$apply) {
if ($apply->{DbTypeSubclass}) {
my $DbTypeSubclass = delete $apply->{DbTypeSubclass};
DBI::_rebless_dbtype_subclass($dbh, $rebless_class||$class, $DbTypeSubclass);
}
my $a;
foreach $a (qw(Profile RaiseError PrintError AutoCommit)) { # do these first
next unless exists $apply->{$a};
$dbh->{$a} = delete $apply->{$a};
}
while ( my ($a, $v) = each %$apply) {
eval { $dbh->{$a} = $v }; # assign in void context to avoid re-FETCH
warn $@ if $@;
}
}
# confirm to driver (ie if subclassed) that we've connected successfully
# and finished the attribute setup. pass in the original arguments
$dbh->connected(@orig_args); #if ref $dbh ne 'DBI::db' or $proxy;
DBI->trace_msg(" <- connect= $dbh\n") if $DBI::dbi_debug & 0xF;
return $dbh;
};
my $dbh = &$connect_closure(undef, undef);
$dbh->{dbi_connect_closure} = $connect_closure if $dbh;
return $dbh;
}
sub disconnect_all {
keys %DBI::installed_drh; # reset iterator
while ( my ($name, $drh) = each %DBI::installed_drh ) {
$drh->disconnect_all() if ref $drh;
}
}
sub disconnect { # a regular beginners bug
Carp::croak("DBI->disconnect is not a DBI method (read the DBI manual)");
}
sub install_driver { # croaks on failure
my $class = shift;
my($driver, $attr) = @_;
my $drh;
$driver ||= $ENV{DBI_DRIVER} || '';
# allow driver to be specified as a 'dbi:driver:' string
$driver = $1 if $driver =~ s/^DBI:(.*?)://i;
Carp::croak("usage: $class->install_driver(\$driver [, \%attr])")
unless ($driver and @_<=3);
# already installed
return $drh if $drh = $DBI::installed_drh{$driver};
$class->trace_msg(" -> $class->install_driver($driver"
.") for $^O perl=$] pid=$$ ruid=$< euid=$>\n")
if $DBI::dbi_debug & 0xF;
# --- load the code
my $driver_class = "DBD::$driver";
eval qq{package # hide from PAUSE
DBI::_firesafe; # just in case
require $driver_class; # load the driver
};
if ($@) {
my $err = $@;
my $advice = "";
if ($err =~ /Can't find loadable object/) {
$advice = "Perhaps DBD::$driver was statically linked into a new perl binary."
."\nIn which case you need to use that new perl binary."
."\nOr perhaps only the .pm file was installed but not the shared object file."
}
elsif ($err =~ /Can't locate.*?DBD\/$driver\.pm in \@INC/) {
my @drv = $class->available_drivers(1);
$advice = "Perhaps the DBD::$driver perl module hasn't been fully installed,\n"
."or perhaps the capitalisation of '$driver' isn't right.\n"
."Available drivers: ".join(", ", @drv).".";
}
elsif ($err =~ /Can't load .*? for module DBD::/) {
$advice = "Perhaps a required shared library or dll isn't installed where expected";
}
elsif ($err =~ /Can't locate .*? in \@INC/) {
$advice = "Perhaps a module that DBD::$driver requires hasn't been fully installed";
}
Carp::croak("install_driver($driver) failed: $err$advice\n");
}
if ($DBI::dbi_debug & 0xF) {
no strict 'refs';
(my $driver_file = $driver_class) =~ s/::/\//g;
my $dbd_ver = ${"$driver_class\::VERSION"} || "undef";
$class->trace_msg(" install_driver: $driver_class version $dbd_ver"
." loaded from $INC{qq($driver_file.pm)}\n");
}
# --- do some behind-the-scenes checks and setups on the driver
$class->setup_driver($driver_class);
# --- run the driver function
$drh = eval { $driver_class->driver($attr || {}) };
unless ($drh && ref $drh && !$@) {
my $advice = "";
$@ ||= "$driver_class->driver didn't return a handle";
# catch people on case in-sensitive systems using the wrong case
$advice = "\nPerhaps the capitalisation of DBD '$driver' isn't right."
if $@ =~ /locate object method/;
Carp::croak("$driver_class initialisation failed: $@$advice");
}
$DBI::installed_drh{$driver} = $drh;
$class->trace_msg(" <- install_driver= $drh\n") if $DBI::dbi_debug & 0xF;
$drh;
}
*driver = \&install_driver; # currently an alias, may change
sub setup_driver {
my ($class, $driver_class) = @_;
my $h_type;
foreach $h_type (qw(dr db st)){
my $h_class = $driver_class."::$h_type";
no strict 'refs';
push @{"${h_class}::ISA"}, "DBD::_::$h_type"
unless UNIVERSAL::isa($h_class, "DBD::_::$h_type");
# The _mem class stuff is (IIRC) a crufty hack for global destruction
# timing issues in early versions of perl5 and possibly no longer needed.
my $mem_class = "DBD::_mem::$h_type";
push @{"${h_class}_mem::ISA"}, $mem_class
unless UNIVERSAL::isa("${h_class}_mem", $mem_class)
or $DBI::PurePerl;
}
}
sub _rebless {
my $dbh = shift;
my ($outer, $inner) = DBI::_handles($dbh);
my $class = shift(@_).'::db';
bless $inner => $class;
bless $outer => $class; # outer last for return
}
sub _set_isa {
my ($classes, $topclass) = @_;
my $trace = DBI->trace_msg(" _set_isa([@$classes])\n");
foreach my $suffix ('::db','::st') {
my $previous = $topclass || 'DBI'; # trees are rooted here
foreach my $class (@$classes) {
my $base_class = $previous.$suffix;
my $sub_class = $class.$suffix;
my $sub_class_isa = "${sub_class}::ISA";
no strict 'refs';
if (@$sub_class_isa) {
DBI->trace_msg(" $sub_class_isa skipped (already set to @$sub_class_isa)\n")
if $trace;
}
else {
@$sub_class_isa = ($base_class) unless @$sub_class_isa;
DBI->trace_msg(" $sub_class_isa = $base_class\n")
if $trace;
}
$previous = $class;
}
}
}
sub _rebless_dbtype_subclass {
my ($dbh, $rootclass, $DbTypeSubclass) = @_;
# determine the db type names for class hierarchy
my @hierarchy = DBI::_dbtype_names($dbh, $DbTypeSubclass);
# add the rootclass prefix to each ('DBI::' or 'MyDBI::' etc)
$_ = $rootclass.'::'.$_ foreach (@hierarchy);
# load the modules from the 'top down'
DBI::_load_class($_, 1) foreach (reverse @hierarchy);
# setup class hierarchy if needed, does both '::db' and '::st'
DBI::_set_isa(\@hierarchy, $rootclass);
# finally bless the handle into the subclass
DBI::_rebless($dbh, $hierarchy[0]);
}
sub _dbtype_names { # list dbtypes for hierarchy, ie Informix=>ADO=>ODBC
my ($dbh, $DbTypeSubclass) = @_;
if ($DbTypeSubclass && $DbTypeSubclass ne '1' && ref $DbTypeSubclass ne 'CODE') {
# treat $DbTypeSubclass as a comma separated list of names
my @dbtypes = split /\s*,\s*/, $DbTypeSubclass;
$dbh->trace_msg(" DbTypeSubclass($DbTypeSubclass)=@dbtypes (explicit)\n");
return @dbtypes;
}
# XXX will call $dbh->get_info(17) (=SQL_DBMS_NAME) in future?
my $driver = $dbh->{Driver}->{Name};
if ( $driver eq 'Proxy' ) {
# XXX Looking into the internals of DBD::Proxy is questionable!
($driver) = $dbh->{proxy_client}->{application} =~ /^DBI:(.+?):/i
or die "Can't determine driver name from proxy";
}
my @dbtypes = (ucfirst($driver));
if ($driver eq 'ODBC' || $driver eq 'ADO') {
# XXX will move these out and make extensible later:
my $_dbtype_name_regexp = 'Oracle'; # eg 'Oracle|Foo|Bar'
my %_dbtype_name_map = (
'Microsoft SQL Server' => 'MSSQL',
'SQL Server' => 'Sybase',
'Adaptive Server Anywhere' => 'ASAny',
'ADABAS D' => 'AdabasD',
);
my $name;
$name = $dbh->func(17, 'GetInfo') # SQL_DBMS_NAME
if $driver eq 'ODBC';
$name = $dbh->{ado_conn}->Properties->Item('DBMS Name')->Value
if $driver eq 'ADO';
die "Can't determine driver name! ($DBI::errstr)\n"
unless $name;
my $dbtype;
if ($_dbtype_name_map{$name}) {
$dbtype = $_dbtype_name_map{$name};
}
else {
if ($name =~ /($_dbtype_name_regexp)/) {
$dbtype = lc($1);
}
else { # generic mangling for other names:
$dbtype = lc($name);
}
$dbtype =~ s/\b(\w)/\U$1/g;
$dbtype =~ s/\W+/_/g;
}
# add ODBC 'behind' ADO
push @dbtypes, 'ODBC' if $driver eq 'ADO';
# add discovered dbtype in front of ADO/ODBC
unshift @dbtypes, $dbtype;
}
@dbtypes = &$DbTypeSubclass($dbh, \@dbtypes)
if (ref $DbTypeSubclass eq 'CODE');
$dbh->trace_msg(" DbTypeSubclass($DbTypeSubclass)=@dbtypes\n");
return @dbtypes;
}
sub _load_class {
my ($load_class, $missing_ok) = @_;
DBI->trace_msg(" _load_class($load_class, $missing_ok)\n", 2);
no strict 'refs';
return 1 if @{"$load_class\::ISA"}; # already loaded/exists
(my $module = $load_class) =~ s!::!/!g;
DBI->trace_msg(" _load_class require $module\n", 2);
eval { require "$module.pm"; };
return 1 unless $@;
return 0 if $missing_ok && $@ =~ /^Can't locate \Q$module.pm\E/;
die $@;
}
sub init_rootclass { # deprecated
return 1;
}
*internal = \&DBD::Switch::dr::driver;
sub driver_prefix {
my ($class, $driver) = @_;
return $dbd_class_registry{$driver}->{prefix} if exists $dbd_class_registry{$driver};
return;
}
sub available_drivers {
my($quiet) = @_;
my(@drivers, $d, $f);
local(*DBI::DIR, $@);
my(%seen_dir, %seen_dbd);
my $haveFileSpec = eval { require File::Spec };
foreach $d (@INC){
chomp($d); # Perl 5 beta 3 bug in #!./perl -Ilib from Test::Harness
my $dbd_dir =
($haveFileSpec ? File::Spec->catdir($d, 'DBD') : "$d/DBD");
next unless -d $dbd_dir;
next if $seen_dir{$d};
$seen_dir{$d} = 1;
# XXX we have a problem here with case insensitive file systems
# XXX since we can't tell what case must be used when loading.
opendir(DBI::DIR, $dbd_dir) || Carp::carp "opendir $dbd_dir: $!\n";
foreach $f (readdir(DBI::DIR)){
next unless $f =~ s/\.pm$//;
next if $f eq 'NullP';
if ($seen_dbd{$f}){
Carp::carp "DBD::$f in $d is hidden by DBD::$f in $seen_dbd{$f}\n"
unless $quiet;
} else {
push(@drivers, $f);
}
$seen_dbd{$f} = $d;
}
closedir(DBI::DIR);
}
# "return sort @drivers" will not DWIM in scalar context.
return wantarray ? sort @drivers : @drivers;
}
sub installed_versions {
my ($class, $quiet) = @_;
my %error;
my %version;
for my $driver ($class->available_drivers($quiet)) {
next if $DBI::PurePerl && grep { -d "$_/auto/DBD/$driver" } @INC;
my $drh = eval {
local $SIG{__WARN__} = sub {};
$class->install_driver($driver);
};
($error{"DBD::$driver"}=$@),next if $@;
no strict 'refs';
my $vers = ${"DBD::$driver" . '::VERSION'};
$version{"DBD::$driver"} = $vers || '?';
}
if (wantarray) {
return map { m/^DBD::(\w+)/ ? ($1) : () } sort keys %version;
}
$version{"DBI"} = $DBI::VERSION;
$version{"DBI::PurePerl"} = $DBI::PurePerl::VERSION if $DBI::PurePerl;
if (!defined wantarray) { # void context
require Config; # add more detail
$version{OS} = "$^O\t($Config::Config{osvers})";
$version{Perl} = "$]\t($Config::Config{archname})";
$version{$_} = (($error{$_} =~ s/ \(\@INC.*//s),$error{$_})
for keys %error;
printf " %-16s: %s\n",$_,$version{$_}
for reverse sort keys %version;
}
return \%version;
}
sub data_sources {
my ($class, $driver, @other) = @_;
my $drh = $class->install_driver($driver);
my @ds = $drh->data_sources(@other);
return @ds;
}
sub neat_list {
my ($listref, $maxlen, $sep) = @_;
$maxlen = 0 unless defined $maxlen; # 0 == use internal default
$sep = ", " unless defined $sep;
join($sep, map { neat($_,$maxlen) } @$listref);
}
sub dump_results { # also aliased as a method in DBD::_::st
my ($sth, $maxlen, $lsep, $fsep, $fh) = @_;
return 0 unless $sth;
$maxlen ||= 35;
$lsep ||= "\n";
$fh ||= \*STDOUT;
my $rows = 0;
my $ref;
while($ref = $sth->fetch) {
print $fh $lsep if $rows++ and $lsep;
my $str = neat_list($ref,$maxlen,$fsep);
print $fh $str; # done on two lines to avoid 5.003 errors
}
print $fh "\n$rows rows".($DBI::err ? " ($DBI::err: $DBI::errstr)" : "")."\n";
$rows;
}
sub data_diff {
my ($a, $b, $logical) = @_;
my $diff = data_string_diff($a, $b);
return "" if $logical and !$diff;
my $a_desc = data_string_desc($a);
my $b_desc = data_string_desc($b);
return "" if !$diff and $a_desc eq $b_desc;
$diff ||= "Strings contain the same sequence of characters"
if length($a);
$diff .= "\n" if $diff;
return "a: $a_desc\nb: $b_desc\n$diff";
}
sub data_string_diff {
# Compares 'logical' characters, not bytes, so a latin1 string and an
# an equivalent Unicode string will compare as equal even though their
# byte encodings are different.
my ($a, $b) = @_;
unless (defined $a and defined $b) { # one undef
return ""
if !defined $a and !defined $b;
return "String a is undef, string b has ".length($b)." characters"
if !defined $a;
return "String b is undef, string a has ".length($a)." characters"
if !defined $b;
}
require utf8;
# hack to cater for perl 5.6
*utf8::is_utf8 = sub { (DBI::neat(shift)=~/^"/) } unless defined &utf8::is_utf8;
my @a_chars = (utf8::is_utf8($a)) ? unpack("U*", $a) : unpack("C*", $a);
my @b_chars = (utf8::is_utf8($b)) ? unpack("U*", $b) : unpack("C*", $b);
my $i = 0;
while (@a_chars && @b_chars) {
++$i, shift(@a_chars), shift(@b_chars), next
if $a_chars[0] == $b_chars[0];# compare ordinal values
my @desc = map {
$_ > 255 ? # if wide character...
sprintf("\\x{%04X}", $_) : # \x{...}
chr($_) =~ /[[:cntrl:]]/ ? # else if control character ...
sprintf("\\x%02X", $_) : # \x..
chr($_) # else as themselves
} ($a_chars[0], $b_chars[0]);
# highlight probable double-encoding?
foreach my $c ( @desc ) {
next unless $c =~ m/\\x\{08(..)}/;
$c .= "='" .chr(hex($1)) ."'"
}
return sprintf "Strings differ at index $i: a[$i]=$desc[0], b[$i]=$desc[1]";
}
return "String a truncated after $i characters" if @b_chars;
return "String b truncated after $i characters" if @a_chars;
return "";
}
sub data_string_desc { # describe a data string
my ($a) = @_;
require bytes;
require utf8;
# hacks to cater for perl 5.6
*utf8::is_utf8 = sub { (DBI::neat(shift)=~/^"/) } unless defined &utf8::is_utf8;
*utf8::valid = sub { 1 } unless defined &utf8::valid;
# Give sufficient info to help diagnose at least these kinds of situations:
# - valid UTF8 byte sequence but UTF8 flag not set
# (might be ascii so also need to check for hibit to make it worthwhile)
# - UTF8 flag set but invalid UTF8 byte sequence
# could do better here, but this'll do for now
my $utf8 = sprintf "UTF8 %s%s",
utf8::is_utf8($a) ? "on" : "off",
utf8::valid($a||'') ? "" : " but INVALID encoding";
return "$utf8, undef" unless defined $a;
my $is_ascii = $a =~ m/^[\000-\177]*$/;
return sprintf "%s, %s, %d characters %d bytes",
$utf8, $is_ascii ? "ASCII" : "non-ASCII",
length($a), bytes::length($a);
}
sub connect_test_perf {
my($class, $dsn,$dbuser,$dbpass, $attr) = @_;
Carp::croak("connect_test_perf needs hash ref as fourth arg") unless ref $attr;
# these are non standard attributes just for this special method
my $loops ||= $attr->{dbi_loops} || 5;
my $par ||= $attr->{dbi_par} || 1; # parallelism
my $verb ||= $attr->{dbi_verb} || 1;
my $meth ||= $attr->{dbi_meth} || 'connect';
print "$dsn: testing $loops sets of $par connections:\n";
require "FileHandle.pm"; # don't let toke.c create empty FileHandle package
local $| = 1;
my $drh = $class->install_driver($dsn) or Carp::croak("Can't install $dsn driver\n");
# test the connection and warm up caches etc
$drh->connect($dsn,$dbuser,$dbpass) or Carp::croak("connect failed: $DBI::errstr");
my $t1 = dbi_time();
my $loop;
for $loop (1..$loops) {
my @cons;
print "Connecting... " if $verb;
for (1..$par) {
print "$_ ";
push @cons, ($drh->connect($dsn,$dbuser,$dbpass)
or Carp::croak("connect failed: $DBI::errstr\n"));
}
print "\nDisconnecting...\n" if $verb;
for (@cons) {
$_->disconnect or warn "disconnect failed: $DBI::errstr"
}
}
my $t2 = dbi_time();
my $td = $t2 - $t1;
printf "$meth %d and disconnect them, %d times: %.4fs / %d = %.4fs\n",
$par, $loops, $td, $loops*$par, $td/($loops*$par);
return $td;
}
# Help people doing DBI->errstr, might even document it one day
# XXX probably best moved to cheaper XS code if this gets documented
sub err { $DBI::err }
sub errstr { $DBI::errstr }
# --- Private Internal Function for Creating New DBI Handles
# XXX move to PurePerl?
*DBI::dr::TIEHASH = \&DBI::st::TIEHASH;
*DBI::db::TIEHASH = \&DBI::st::TIEHASH;
# These three special constructors are called by the drivers
# The way they are called is likely to change.
our $shared_profile;
sub _new_drh { # called by DBD::<drivername>::driver()
my ($class, $initial_attr, $imp_data) = @_;
# Provide default storage for State,Err and Errstr.
# Note that these are shared by all child handles by default! XXX
# State must be undef to get automatic faking in DBI::var::FETCH
my ($h_state_store, $h_err_store, $h_errstr_store) = (undef, undef, '');
my $attr = {
# these attributes get copied down to child handles by default
'State' => \$h_state_store, # Holder for DBI::state
'Err' => \$h_err_store, # Holder for DBI::err
'Errstr' => \$h_errstr_store, # Holder for DBI::errstr
'TraceLevel' => 0,
FetchHashKeyName=> 'NAME',
%$initial_attr,
};
my ($h, $i) = _new_handle('DBI::dr', '', $attr, $imp_data, $class);
# XXX DBI_PROFILE unless DBI::PurePerl because for some reason
# it kills the t/zz_*_pp.t tests (they silently exit early)
if (($ENV{DBI_PROFILE} && !$DBI::PurePerl) || $shared_profile) {
# The profile object created here when the first driver is loaded
# is shared by all drivers so we end up with just one set of profile
# data and thus the 'total time in DBI' is really the true total.
if (!$shared_profile) { # first time
$h->{Profile} = $ENV{DBI_PROFILE}; # write string
$shared_profile = $h->{Profile}; # read and record object
}
else {
$h->{Profile} = $shared_profile;
}
}
return $h unless wantarray;
($h, $i);
}
sub _new_dbh { # called by DBD::<drivername>::dr::connect()
my ($drh, $attr, $imp_data) = @_;
my $imp_class = $drh->{ImplementorClass}
or Carp::croak("DBI _new_dbh: $drh has no ImplementorClass");
substr($imp_class,-4,4) = '::db';
my $app_class = ref $drh;
substr($app_class,-4,4) = '::db';
$attr->{Err} ||= \my $err;
$attr->{Errstr} ||= \my $errstr;
$attr->{State} ||= \my $state;
_new_handle($app_class, $drh, $attr, $imp_data, $imp_class);
}
sub _new_sth { # called by DBD::<drivername>::db::prepare)
my ($dbh, $attr, $imp_data) = @_;
my $imp_class = $dbh->{ImplementorClass}
or Carp::croak("DBI _new_sth: $dbh has no ImplementorClass");
substr($imp_class,-4,4) = '::st';
my $app_class = ref $dbh;
substr($app_class,-4,4) = '::st';
_new_handle($app_class, $dbh, $attr, $imp_data, $imp_class);
}
# end of DBI package
# --------------------------------------------------------------------
# === The internal DBI Switch pseudo 'driver' class ===
{ package # hide from PAUSE
DBD::Switch::dr;
DBI->setup_driver('DBD::Switch'); # sets up @ISA
$DBD::Switch::dr::imp_data_size = 0;
$DBD::Switch::dr::imp_data_size = 0; # avoid typo warning
my $drh;
sub driver {
return $drh if $drh; # a package global
my $inner;
($drh, $inner) = DBI::_new_drh('DBD::Switch::dr', {
'Name' => 'Switch',
'Version' => $DBI::VERSION,
'Attribution' => "DBI $DBI::VERSION by Tim Bunce",
});
Carp::croak("DBD::Switch init failed!") unless ($drh && $inner);
return $drh;
}
sub CLONE {
undef $drh;
}
sub FETCH {
my($drh, $key) = @_;
return DBI->trace if $key eq 'DebugDispatch';
return undef if $key eq 'DebugLog'; # not worth fetching, sorry
return $drh->DBD::_::dr::FETCH($key);
undef;
}
sub STORE {
my($drh, $key, $value) = @_;
if ($key eq 'DebugDispatch') {
DBI->trace($value);
} elsif ($key eq 'DebugLog') {
DBI->trace(-1, $value);
} else {
$drh->DBD::_::dr::STORE($key, $value);
}
}
}
# --------------------------------------------------------------------
# === OPTIONAL MINIMAL BASE CLASSES FOR DBI SUBCLASSES ===
# We only define default methods for harmless functions.
# We don't, for example, define a DBD::_::st::prepare()
{ package # hide from PAUSE
DBD::_::common; # ====== Common base class methods ======
use strict;
# methods common to all handle types:
# generic TIEHASH default methods:
sub FIRSTKEY { }
sub NEXTKEY { }
sub EXISTS { defined($_[0]->FETCH($_[1])) } # XXX undef?
sub CLEAR { Carp::carp "Can't CLEAR $_[0] (DBI)" }
sub FETCH_many { # XXX should move to C one day
my $h = shift;
# scalar is needed to workaround drivers that return an empty list
# for some attributes
return map { scalar $h->FETCH($_) } @_;
}
*dump_handle = \&DBI::dump_handle;
sub install_method {
# special class method called directly by apps and/or drivers
# to install new methods into the DBI dispatcher
# DBD::Foo::db->install_method("foo_mumble", { usage => [...], options => '...' });
my ($class, $method, $attr) = @_;
Carp::croak("Class '$class' must begin with DBD:: and end with ::db or ::st")
unless $class =~ /^DBD::(\w+)::(dr|db|st)$/;
my ($driver, $subtype) = ($1, $2);
Carp::croak("invalid method name '$method'")
unless $method =~ m/^([a-z][a-z0-9]*_)\w+$/;
my $prefix = $1;
my $reg_info = $dbd_prefix_registry->{$prefix};
Carp::carp("method name prefix '$prefix' is not associated with a registered driver") unless $reg_info;
my $full_method = "DBI::${subtype}::$method";
$DBI::installed_methods{$full_method} = $attr;
my (undef, $filename, $line) = caller;
# XXX reformat $attr as needed for _install_method
my %attr = %{$attr||{}}; # copy so we can edit
DBI->_install_method("DBI::${subtype}::$method", "$filename at line $line", \%attr);
}
sub parse_trace_flags {
my ($h, $spec) = @_;
my $level = 0;
my $flags = 0;
my @unknown;
for my $word (split /\s*[|&,]\s*/, $spec) {
if (DBI::looks_like_number($word) && $word <= 0xF && $word >= 0) {
$level = $word;
} elsif ($word eq 'ALL') {
$flags = 0x7FFFFFFF; # XXX last bit causes negative headaches
last;
} elsif (my $flag = $h->parse_trace_flag($word)) {
$flags |= $flag;
}
else {
push @unknown, $word;
}
}
if (@unknown && (ref $h ? $h->FETCH('Warn') : 1)) {
Carp::carp("$h->parse_trace_flags($spec) ignored unknown trace flags: ".
join(" ", map { DBI::neat($_) } @unknown));
}
$flags |= $level;
return $flags;
}
sub parse_trace_flag {
my ($h, $name) = @_;
# 0xddDDDDrL (driver, DBI, reserved, Level)
return 0x00000100 if $name eq 'SQL';
return 0x00000200 if $name eq 'CON';
return 0x00000400 if $name eq 'ENC';
return 0x00000800 if $name eq 'DBD';
return 0x00001000 if $name eq 'TXN';
return;
}
sub private_attribute_info {
return undef;
}
sub visit_child_handles {
my ($h, $code, $info) = @_;
$info = {} if not defined $info;
for my $ch (@{ $h->{ChildHandles} || []}) {
next unless $ch;
my $child_info = $code->($ch, $info)
or next;
$ch->visit_child_handles($code, $child_info);
}
return $info;
}
}
{ package # hide from PAUSE
DBD::_::dr; # ====== DRIVER ======
@DBD::_::dr::ISA = qw(DBD::_::common);
use strict;
sub default_user {
my ($drh, $user, $pass, $attr) = @_;
$user = $ENV{DBI_USER} unless defined $user;
$pass = $ENV{DBI_PASS} unless defined $pass;
return ($user, $pass);
}
sub connect { # normally overridden, but a handy default
my ($drh, $dsn, $user, $auth) = @_;
my ($this) = DBI::_new_dbh($drh, {
'Name' => $dsn,
});
# XXX debatable as there's no "server side" here
# (and now many uses would trigger warnings on DESTROY)
# $this->STORE(Active => 1);
# so drivers should set it in their own connect
$this;
}
sub connect_cached {
my $drh = shift;
my ($dsn, $user, $auth, $attr) = @_;
my $cache = $drh->{CachedKids} ||= {};
my $key = do { local $^W;
join "!\001", $dsn, $user, $auth, DBI::_concat_hash_sorted($attr, "=\001", ",\001", 0, 0)
};
my $dbh = $cache->{$key};
$drh->trace_msg(sprintf(" connect_cached: key '$key', cached dbh $dbh\n", DBI::neat($key), DBI::neat($dbh)))
if (($DBI::dbi_debug & 0xF) >= 4);
my $cb = $attr->{Callbacks}; # take care not to autovivify
if ($dbh && $dbh->FETCH('Active') && eval { $dbh->ping }) {
# If the caller has provided a callback then call it
if ($cb and $cb = $cb->{"connect_cached.reused"}) {
local $_ = "connect_cached.reused";
$cb->($dbh, $dsn, $user, $auth, $attr);
}
return $dbh;
}
# If the caller has provided a callback then call it
if ($cb and (my $new_cb = $cb->{"connect_cached.new"})) {
local $_ = "connect_cached.new";
$new_cb->($dbh, $dsn, $user, $auth, $attr); # $dbh is dead or undef
}
$dbh = $drh->connect(@_);
$cache->{$key} = $dbh; # replace prev entry, even if connect failed
if ($cb and (my $conn_cb = $cb->{"connect_cached.connected"})) {
local $_ = "connect_cached.connected";
$conn_cb->($dbh, $dsn, $user, $auth, $attr);
}
return $dbh;
}
}
{ package # hide from PAUSE
DBD::_::db; # ====== DATABASE ======
@DBD::_::db::ISA = qw(DBD::_::common);
use strict;
sub clone {
my ($old_dbh, $attr) = @_;
my $closure = $old_dbh->{dbi_connect_closure}
or return $old_dbh->set_err($DBI::stderr, "Can't clone handle");
unless ($attr) { # XXX deprecated, caller should always pass a hash ref
# copy attributes visible in the attribute cache
keys %$old_dbh; # reset iterator
while ( my ($k, $v) = each %$old_dbh ) {
# ignore non-code refs, i.e., caches, handles, Err etc
next if ref $v && ref $v ne 'CODE'; # HandleError etc
$attr->{$k} = $v;
}
# explicitly set attributes which are unlikely to be in the
# attribute cache, i.e., boolean's and some others
$attr->{$_} = $old_dbh->FETCH($_) for (qw(
AutoCommit ChopBlanks InactiveDestroy AutoInactiveDestroy
LongTruncOk PrintError PrintWarn Profile RaiseError
ShowErrorStatement TaintIn TaintOut
));
}
# use Data::Dumper; warn Dumper([$old_dbh, $attr]);
my $new_dbh = &$closure($old_dbh, $attr);
unless ($new_dbh) {
# need to copy err/errstr from driver back into $old_dbh
my $drh = $old_dbh->{Driver};
return $old_dbh->set_err($drh->err, $drh->errstr, $drh->state);
}
$new_dbh->{dbi_connect_closure} = $closure;
return $new_dbh;
}
sub quote_identifier {
my ($dbh, @id) = @_;
my $attr = (@id > 3 && ref($id[-1])) ? pop @id : undef;
my $info = $dbh->{dbi_quote_identifier_cache} ||= [
$dbh->get_info(29) || '"', # SQL_IDENTIFIER_QUOTE_CHAR
$dbh->get_info(41) || '.', # SQL_CATALOG_NAME_SEPARATOR
$dbh->get_info(114) || 1, # SQL_CATALOG_LOCATION
];
my $quote = $info->[0];
foreach (@id) { # quote the elements
next unless defined;
s/$quote/$quote$quote/g; # escape embedded quotes
$_ = qq{$quote$_$quote};
}
# strip out catalog if present for special handling
my $catalog = (@id >= 3) ? shift @id : undef;
# join the dots, ignoring any null/undef elements (ie schema)
my $quoted_id = join '.', grep { defined } @id;
if ($catalog) { # add catalog correctly
if ($quoted_id) {
$quoted_id = ($info->[2] == 2) # SQL_CL_END
? $quoted_id . $info->[1] . $catalog
: $catalog . $info->[1] . $quoted_id;
} else {
$quoted_id = $catalog;
}
}
return $quoted_id;
}
sub quote {
my ($dbh, $str, $data_type) = @_;
return "NULL" unless defined $str;
unless ($data_type) {
$str =~ s/'/''/g; # ISO SQL2
return "'$str'";
}
my $dbi_literal_quote_cache = $dbh->{'dbi_literal_quote_cache'} ||= [ {} , {} ];
my ($prefixes, $suffixes) = @$dbi_literal_quote_cache;
my $lp = $prefixes->{$data_type};
my $ls = $suffixes->{$data_type};
if ( ! defined $lp || ! defined $ls ) {
my $ti = $dbh->type_info($data_type);
$lp = $prefixes->{$data_type} = $ti ? $ti->{LITERAL_PREFIX} || "" : "'";
$ls = $suffixes->{$data_type} = $ti ? $ti->{LITERAL_SUFFIX} || "" : "'";
}
return $str unless $lp || $ls; # no quoting required
# XXX don't know what the standard says about escaping
# in the 'general case' (where $lp != "'").
# So we just do this and hope:
$str =~ s/$lp/$lp$lp/g
if $lp && $lp eq $ls && ($lp eq "'" || $lp eq '"');
return "$lp$str$ls";
}
sub rows { -1 } # here so $DBI::rows 'works' after using $dbh
sub do {
my($dbh, $statement, $attr, @params) = @_;
my $sth = $dbh->prepare($statement, $attr) or return undef;
$sth->execute(@params) or return undef;
my $rows = $sth->rows;
($rows == 0) ? "0E0" : $rows;
}
sub _do_selectrow {
my ($method, $dbh, $stmt, $attr, @bind) = @_;
my $sth = ((ref $stmt) ? $stmt : $dbh->prepare($stmt, $attr))
or return undef;
$sth->execute(@bind)
or return undef;
my $row = $sth->$method()
and $sth->finish;
return $row;
}
sub selectrow_hashref { return _do_selectrow('fetchrow_hashref', @_); }
# XXX selectrow_array/ref also have C implementations in Driver.xst
sub selectrow_arrayref { return _do_selectrow('fetchrow_arrayref', @_); }
sub selectrow_array {
my $row = _do_selectrow('fetchrow_arrayref', @_) or return;
return $row->[0] unless wantarray;
return @$row;
}
sub selectall_array {
return @{ shift->selectall_arrayref(@_) || [] };
}
# XXX selectall_arrayref also has C implementation in Driver.xst
# which fallsback to this if a slice is given
sub selectall_arrayref {
my ($dbh, $stmt, $attr, @bind) = @_;
my $sth = (ref $stmt) ? $stmt : $dbh->prepare($stmt, $attr)
or return;
$sth->execute(@bind) || return;
my $slice = $attr->{Slice}; # typically undef, else hash or array ref
if (!$slice and $slice=$attr->{Columns}) {
if (ref $slice eq 'ARRAY') { # map col idx to perl array idx
$slice = [ @{$attr->{Columns}} ]; # take a copy
for (@$slice) { $_-- }
}
}
my $rows = $sth->fetchall_arrayref($slice, my $MaxRows = $attr->{MaxRows});
$sth->finish if defined $MaxRows;
return $rows;
}
sub selectall_hashref {
my ($dbh, $stmt, $key_field, $attr, @bind) = @_;
my $sth = (ref $stmt) ? $stmt : $dbh->prepare($stmt, $attr);
return unless $sth;
$sth->execute(@bind) || return;
return $sth->fetchall_hashref($key_field);
}
sub selectcol_arrayref {
my ($dbh, $stmt, $attr, @bind) = @_;
my $sth = (ref $stmt) ? $stmt : $dbh->prepare($stmt, $attr);
return unless $sth;
$sth->execute(@bind) || return;
my @columns = ($attr->{Columns}) ? @{$attr->{Columns}} : (1);
my @values = (undef) x @columns;
my $idx = 0;
for (@columns) {
$sth->bind_col($_, \$values[$idx++]) || return;
}
my @col;
if (my $max = $attr->{MaxRows}) {
push @col, @values while 0 < $max-- && $sth->fetch;
}
else {
push @col, @values while $sth->fetch;
}
return \@col;
}
sub prepare_cached {
my ($dbh, $statement, $attr, $if_active) = @_;
# Needs support at dbh level to clear cache before complaining about
# active children. The XS template code does this. Drivers not using
# the template must handle clearing the cache themselves.
my $cache = $dbh->{CachedKids} ||= {};
my $key = do { local $^W;
join "!\001", $statement, DBI::_concat_hash_sorted($attr, "=\001", ",\001", 0, 0)
};
my $sth = $cache->{$key};
if ($sth) {
return $sth unless $sth->FETCH('Active');
Carp::carp("prepare_cached($statement) statement handle $sth still Active")
unless ($if_active ||= 0);
$sth->finish if $if_active <= 1;
return $sth if $if_active <= 2;
}
$sth = $dbh->prepare($statement, $attr);
$cache->{$key} = $sth if $sth;
return $sth;
}
sub ping {
my $dbh = shift;
# "0 but true" is a special kind of true 0 that is used here so
# applications can check if the ping was a real ping or not
($dbh->FETCH('Active')) ? "0 but true" : 0;
}
sub begin_work {
my $dbh = shift;
return $dbh->set_err($DBI::stderr, "Already in a transaction")
unless $dbh->FETCH('AutoCommit');
$dbh->STORE('AutoCommit', 0); # will croak if driver doesn't support it
$dbh->STORE('BegunWork', 1); # trigger post commit/rollback action
return 1;
}
sub primary_key {
my ($dbh, @args) = @_;
my $sth = $dbh->primary_key_info(@args) or return;
my ($row, @col);
push @col, $row->[3] while ($row = $sth->fetch);
Carp::croak("primary_key method not called in list context")
unless wantarray; # leave us some elbow room
return @col;
}
sub tables {
my ($dbh, @args) = @_;
my $sth = $dbh->table_info(@args[0,1,2,3,4]) or return;
my $tables = $sth->fetchall_arrayref or return;
my @tables;
if (defined($args[3]) && $args[3] eq '%' # special case for tables('','','','%')
&& grep {defined($_) && $_ eq ''} @args[0,1,2]
) {
@tables = map { $_->[3] } @$tables;
} elsif ($dbh->get_info(29)) { # SQL_IDENTIFIER_QUOTE_CHAR
@tables = map { $dbh->quote_identifier( @{$_}[0,1,2] ) } @$tables;
}
else { # temporary old style hack (yeach)
@tables = map {
my $name = $_->[2];
if ($_->[1]) {
my $schema = $_->[1];
# a sad hack (mostly for Informix I recall)
my $quote = ($schema eq uc($schema)) ? '' : '"';
$name = "$quote$schema$quote.$name"
}
$name;
} @$tables;
}
return @tables;
}
sub type_info { # this should be sufficient for all drivers
my ($dbh, $data_type) = @_;
my $idx_hash;
my $tia = $dbh->{dbi_type_info_row_cache};
if ($tia) {
$idx_hash = $dbh->{dbi_type_info_idx_cache};
}
else {
my $temp = $dbh->type_info_all;
return unless $temp && @$temp;
# we cache here because type_info_all may be expensive to call
# (and we take a copy so the following shift can't corrupt
# the data that may be returned by future calls to type_info_all)
$tia = $dbh->{dbi_type_info_row_cache} = [ @$temp ];
$idx_hash = $dbh->{dbi_type_info_idx_cache} = shift @$tia;
}
my $dt_idx = $idx_hash->{DATA_TYPE} || $idx_hash->{data_type};
Carp::croak("type_info_all returned non-standard DATA_TYPE index value ($dt_idx != 1)")
if $dt_idx && $dt_idx != 1;
# --- simple DATA_TYPE match filter
my @ti;
my @data_type_list = (ref $data_type) ? @$data_type : ($data_type);
foreach $data_type (@data_type_list) {
if (defined($data_type) && $data_type != DBI::SQL_ALL_TYPES()) {
push @ti, grep { $_->[$dt_idx] == $data_type } @$tia;
}
else { # SQL_ALL_TYPES
push @ti, @$tia;
}
last if @ti; # found at least one match
}
# --- format results into list of hash refs
my $idx_fields = keys %$idx_hash;
my @idx_names = map { uc($_) } keys %$idx_hash;
my @idx_values = values %$idx_hash;
Carp::croak "type_info_all result has $idx_fields keys but ".(@{$ti[0]})." fields"
if @ti && @{$ti[0]} != $idx_fields;
my @out = map {
my %h; @h{@idx_names} = @{$_}[ @idx_values ]; \%h;
} @ti;
return $out[0] unless wantarray;
return @out;
}
sub data_sources {
my ($dbh, @other) = @_;
my $drh = $dbh->{Driver}; # XXX proxy issues?
return $drh->data_sources(@other);
}
}
{ package # hide from PAUSE
DBD::_::st; # ====== STATEMENT ======
@DBD::_::st::ISA = qw(DBD::_::common);
use strict;
sub bind_param { Carp::croak("Can't bind_param, not implement by driver") }
#
# ********************************************************
#
# BEGIN ARRAY BINDING
#
# Array binding support for drivers which don't support
# array binding, but have sufficient interfaces to fake it.
# NOTE: mixing scalars and arrayrefs requires using bind_param_array
# for *all* params...unless we modify bind_param for the default
# case...
#
# 2002-Apr-10 D. Arnold
sub bind_param_array {
my $sth = shift;
my ($p_id, $value_array, $attr) = @_;
return $sth->set_err($DBI::stderr, "Value for parameter $p_id must be a scalar or an arrayref, not a ".ref($value_array))
if defined $value_array and ref $value_array and ref $value_array ne 'ARRAY';
return $sth->set_err($DBI::stderr, "Can't use named placeholder '$p_id' for non-driver supported bind_param_array")
unless DBI::looks_like_number($p_id); # because we rely on execute(@ary) here
return $sth->set_err($DBI::stderr, "Placeholder '$p_id' is out of range")
if $p_id <= 0; # can't easily/reliably test for too big
# get/create arrayref to hold params
my $hash_of_arrays = $sth->{ParamArrays} ||= { };
# If the bind has attribs then we rely on the driver conforming to
# the DBI spec in that a single bind_param() call with those attribs
# makes them 'sticky' and apply to all later execute(@values) calls.
# Since we only call bind_param() if we're given attribs then
# applications using drivers that don't support bind_param can still
# use bind_param_array() so long as they don't pass any attribs.
$$hash_of_arrays{$p_id} = $value_array;
return $sth->bind_param($p_id, undef, $attr)
if $attr;
1;
}
sub bind_param_inout_array {
my $sth = shift;
# XXX not supported so we just call bind_param_array instead
# and then return an error
my ($p_num, $value_array, $attr) = @_;
$sth->bind_param_array($p_num, $value_array, $attr);
return $sth->set_err($DBI::stderr, "bind_param_inout_array not supported");
}
sub bind_columns {
my $sth = shift;
my $fields = $sth->FETCH('NUM_OF_FIELDS') || 0;
if ($fields <= 0 && !$sth->{Active}) {
return $sth->set_err($DBI::stderr, "Statement has no result columns to bind"
." (perhaps you need to successfully call execute first, or again)");
}
# Backwards compatibility for old-style call with attribute hash
# ref as first arg. Skip arg if undef or a hash ref.
my $attr;
$attr = shift if !defined $_[0] or ref($_[0]) eq 'HASH';
my $idx = 0;
$sth->bind_col(++$idx, shift, $attr) or return
while (@_ and $idx < $fields);
return $sth->set_err($DBI::stderr, "bind_columns called with ".($idx+@_)." values but $fields are needed")
if @_ or $idx != $fields;
return 1;
}
sub execute_array {
my $sth = shift;
my ($attr, @array_of_arrays) = @_;
my $NUM_OF_PARAMS = $sth->FETCH('NUM_OF_PARAMS'); # may be undef at this point
# get tuple status array or hash attribute
my $tuple_sts = $attr->{ArrayTupleStatus};
return $sth->set_err($DBI::stderr, "ArrayTupleStatus attribute must be an arrayref")
if $tuple_sts and ref $tuple_sts ne 'ARRAY';
# bind all supplied arrays
if (@array_of_arrays) {
$sth->{ParamArrays} = { }; # clear out old params
return $sth->set_err($DBI::stderr,
@array_of_arrays." bind values supplied but $NUM_OF_PARAMS expected")
if defined ($NUM_OF_PARAMS) && @array_of_arrays != $NUM_OF_PARAMS;
$sth->bind_param_array($_, $array_of_arrays[$_-1]) or return
foreach (1..@array_of_arrays);
}
my $fetch_tuple_sub;
if ($fetch_tuple_sub = $attr->{ArrayTupleFetch}) { # fetch on demand
return $sth->set_err($DBI::stderr,
"Can't use both ArrayTupleFetch and explicit bind values")
if @array_of_arrays; # previous bind_param_array calls will simply be ignored
if (UNIVERSAL::isa($fetch_tuple_sub,'DBI::st')) {
my $fetch_sth = $fetch_tuple_sub;
return $sth->set_err($DBI::stderr,
"ArrayTupleFetch sth is not Active, need to execute() it first")
unless $fetch_sth->{Active};
# check column count match to give more friendly message
my $NUM_OF_FIELDS = $fetch_sth->{NUM_OF_FIELDS};
return $sth->set_err($DBI::stderr,
"$NUM_OF_FIELDS columns from ArrayTupleFetch sth but $NUM_OF_PARAMS expected")
if defined($NUM_OF_FIELDS) && defined($NUM_OF_PARAMS)
&& $NUM_OF_FIELDS != $NUM_OF_PARAMS;
$fetch_tuple_sub = sub { $fetch_sth->fetchrow_arrayref };
}
elsif (!UNIVERSAL::isa($fetch_tuple_sub,'CODE')) {
return $sth->set_err($DBI::stderr, "ArrayTupleFetch '$fetch_tuple_sub' is not a code ref or statement handle");
}
}
else {
my $NUM_OF_PARAMS_given = keys %{ $sth->{ParamArrays} || {} };
return $sth->set_err($DBI::stderr,
"$NUM_OF_PARAMS_given bind values supplied but $NUM_OF_PARAMS expected")
if defined($NUM_OF_PARAMS) && $NUM_OF_PARAMS != $NUM_OF_PARAMS_given;
# get the length of a bound array
my $maxlen;
my %hash_of_arrays = %{$sth->{ParamArrays}};
foreach (keys(%hash_of_arrays)) {
my $ary = $hash_of_arrays{$_};
next unless ref $ary eq 'ARRAY';
$maxlen = @$ary if !$maxlen || @$ary > $maxlen;
}
# if there are no arrays then execute scalars once
$maxlen = 1 unless defined $maxlen;
my @bind_ids = 1..keys(%hash_of_arrays);
my $tuple_idx = 0;
$fetch_tuple_sub = sub {
return if $tuple_idx >= $maxlen;
my @tuple = map {
my $a = $hash_of_arrays{$_};
ref($a) ? $a->[$tuple_idx] : $a
} @bind_ids;
++$tuple_idx;
return \@tuple;
};
}
# pass thru the callers scalar or list context
return $sth->execute_for_fetch($fetch_tuple_sub, $tuple_sts);
}
sub execute_for_fetch {
my ($sth, $fetch_tuple_sub, $tuple_status) = @_;
# start with empty status array
($tuple_status) ? @$tuple_status = () : $tuple_status = [];
my $rc_total = 0;
my $err_count;
while ( my $tuple = &$fetch_tuple_sub() ) {
if ( my $rc = $sth->execute(@$tuple) ) {
push @$tuple_status, $rc;
$rc_total = ($rc >= 0 && $rc_total >= 0) ? $rc_total + $rc : -1;
}
else {
$err_count++;
push @$tuple_status, [ $sth->err, $sth->errstr, $sth->state ];
# XXX drivers implementing execute_for_fetch could opt to "last;" here
# if they know the error code means no further executes will work.
}
}
my $tuples = @$tuple_status;
return $sth->set_err($DBI::stderr, "executing $tuples generated $err_count errors")
if $err_count;
$tuples ||= "0E0";
return $tuples unless wantarray;
return ($tuples, $rc_total);
}
sub fetchall_arrayref { # ALSO IN Driver.xst
my ($sth, $slice, $max_rows) = @_;
# when batch fetching with $max_rows were very likely to try to
# fetch the 'next batch' after the previous batch returned
# <=$max_rows. So don't treat that as an error.
return undef if $max_rows and not $sth->FETCH('Active');
my $mode = ref($slice) || 'ARRAY';
my @rows;
if ($mode eq 'ARRAY') {
my $row;
# we copy the array here because fetch (currently) always
# returns the same array ref. XXX
if ($slice && @$slice) {
$max_rows = -1 unless defined $max_rows;
push @rows, [ @{$row}[ @$slice] ]
while($max_rows-- and $row = $sth->fetch);
}
elsif (defined $max_rows) {
push @rows, [ @$row ]
while($max_rows-- and $row = $sth->fetch);
}
else {
push @rows, [ @$row ] while($row = $sth->fetch);
}
return \@rows
}
my %row;
if ($mode eq 'REF' && ref($$slice) eq 'HASH') { # \{ $idx => $name }
keys %$$slice; # reset the iterator
while ( my ($idx, $name) = each %$$slice ) {
$sth->bind_col($idx+1, \$row{$name});
}
}
elsif ($mode eq 'HASH') {
if (keys %$slice) { # resets the iterator
my $name2idx = $sth->FETCH('NAME_lc_hash');
while ( my ($name, $unused) = each %$slice ) {
my $idx = $name2idx->{lc $name};
return $sth->set_err($DBI::stderr, "Invalid column name '$name' for slice")
if not defined $idx;
$sth->bind_col($idx+1, \$row{$name});
}
}
else {
my @column_names = @{ $sth->FETCH($sth->FETCH('FetchHashKeyName')) };
return [] if !@column_names;
$sth->bind_columns( \( @row{@column_names} ) );
}
}
else {
return $sth->set_err($DBI::stderr, "fetchall_arrayref($mode) invalid");
}
if (not defined $max_rows) {
push @rows, { %row } while ($sth->fetch); # full speed ahead!
}
else {
push @rows, { %row } while ($max_rows-- and $sth->fetch);
}
return \@rows;
}
sub fetchall_hashref {
my ($sth, $key_field) = @_;
my $hash_key_name = $sth->{FetchHashKeyName} || 'NAME';
my $names_hash = $sth->FETCH("${hash_key_name}_hash");
my @key_fields = (ref $key_field) ? @$key_field : ($key_field);
my @key_indexes;
my $num_of_fields = $sth->FETCH('NUM_OF_FIELDS');
foreach (@key_fields) {
my $index = $names_hash->{$_}; # perl index not column
$index = $_ - 1 if !defined $index && DBI::looks_like_number($_) && $_>=1 && $_ <= $num_of_fields;
return $sth->set_err($DBI::stderr, "Field '$_' does not exist (not one of @{[keys %$names_hash]})")
unless defined $index;
push @key_indexes, $index;
}
my $rows = {};
my $NAME = $sth->FETCH($hash_key_name);
my @row = (undef) x $num_of_fields;
$sth->bind_columns(\(@row));
while ($sth->fetch) {
my $ref = $rows;
$ref = $ref->{$row[$_]} ||= {} for @key_indexes;
@{$ref}{@$NAME} = @row;
}
return $rows;
}
*dump_results = \&DBI::dump_results;
sub blob_copy_to_file { # returns length or undef on error
my($self, $field, $filename_or_handleref, $blocksize) = @_;
my $fh = $filename_or_handleref;
my($len, $buf) = (0, "");
$blocksize ||= 512; # not too ambitious
local(*FH);
unless(ref $fh) {
open(FH, ">$fh") || return undef;
$fh = \*FH;
}
while(defined($self->blob_read($field, $len, $blocksize, \$buf))) {
print $fh $buf;
$len += length $buf;
}
close(FH);
$len;
}
sub more_results {
shift->{syb_more_results}; # handy grandfathering
}
}
unless ($DBI::PurePerl) { # See install_driver
{ @DBD::_mem::dr::ISA = qw(DBD::_mem::common); }
{ @DBD::_mem::db::ISA = qw(DBD::_mem::common); }
{ @DBD::_mem::st::ISA = qw(DBD::_mem::common); }
# DBD::_mem::common::DESTROY is implemented in DBI.xs
}
1;
__END__
=head1 DESCRIPTION
The DBI is a database access module for the Perl programming language. It defines
a set of methods, variables, and conventions that provide a consistent
database interface, independent of the actual database being used.
It is important to remember that the DBI is just an interface.
The DBI is a layer
of "glue" between an application and one or more database I<driver>
modules. It is the driver modules which do most of the real work. The DBI
provides a standard interface and framework for the drivers to operate
within.
This document often uses terms like I<references>, I<objects>,
I<methods>. If you're not familiar with those terms then it would
be a good idea to read at least the following perl manuals first:
L<perlreftut>, L<perldsc>, L<perllol>, and L<perlboot>.
=head2 Architecture of a DBI Application
|<- Scope of DBI ->|
.-. .--------------. .-------------.
.-------. | |---| XYZ Driver |---| XYZ Engine |
| Perl | | | `--------------' `-------------'
| script| |A| |D| .--------------. .-------------.
| using |--|P|--|B|---|Oracle Driver |---|Oracle Engine|
| DBI | |I| |I| `--------------' `-------------'
| API | | |...
|methods| | |... Other drivers
`-------' | |...
`-'
The API, or Application Programming Interface, defines the
call interface and variables for Perl scripts to use. The API
is implemented by the Perl DBI extension.
The DBI "dispatches" the method calls to the appropriate driver for
actual execution. The DBI is also responsible for the dynamic loading
of drivers, error checking and handling, providing default
implementations for methods, and many other non-database specific duties.
Each driver
contains implementations of the DBI methods using the
private interface functions of the corresponding database engine. Only authors
of sophisticated/multi-database applications or generic library
functions need be concerned with drivers.
=head2 Notation and Conventions
The following conventions are used in this document:
$dbh Database handle object
$sth Statement handle object
$drh Driver handle object (rarely seen or used in applications)
$h Any of the handle types above ($dbh, $sth, or $drh)
$rc General Return Code (boolean: true=ok, false=error)
$rv General Return Value (typically an integer)
@ary List of values returned from the database, typically a row of data
$rows Number of rows processed (if available, else -1)
$fh A filehandle
undef NULL values are represented by undefined values in Perl
\%attr Reference to a hash of attribute values passed to methods
Note that Perl will automatically destroy database and statement handle objects
if all references to them are deleted.
=head2 Outline Usage
To use DBI,
first you need to load the DBI module:
use DBI;
use strict;
(The C<use strict;> isn't required but is strongly recommended.)
Then you need to L</connect> to your data source and get a I<handle> for that
connection:
$dbh = DBI->connect($dsn, $user, $password,
{ RaiseError => 1, AutoCommit => 0 });
Since connecting can be expensive, you generally just connect at the
start of your program and disconnect at the end.
Explicitly defining the required C<AutoCommit> behaviour is strongly
recommended and may become mandatory in a later version. This
determines whether changes are automatically committed to the
database when executed, or need to be explicitly committed later.
The DBI allows an application to "prepare" statements for later
execution. A prepared statement is identified by a statement handle
held in a Perl variable.
We'll call the Perl variable C<$sth> in our examples.
The typical method call sequence for a C<SELECT> statement is:
prepare,
execute, fetch, fetch, ...
execute, fetch, fetch, ...
execute, fetch, fetch, ...
for example:
$sth = $dbh->prepare("SELECT foo, bar FROM table WHERE baz=?");
$sth->execute( $baz );
while ( @row = $sth->fetchrow_array ) {
print "@row\n";
}
The typical method call sequence for a I<non>-C<SELECT> statement is:
prepare,
execute,
execute,
execute.
for example:
$sth = $dbh->prepare("INSERT INTO table(foo,bar,baz) VALUES (?,?,?)");
while(<CSV>) {
chomp;
my ($foo,$bar,$baz) = split /,/;
$sth->execute( $foo, $bar, $baz );
}
The C<do()> method can be used for non repeated I<non>-C<SELECT> statement
(or with drivers that don't support placeholders):
$rows_affected = $dbh->do("UPDATE your_table SET foo = foo + 1");
To commit your changes to the database (when L</AutoCommit> is off):
$dbh->commit; # or call $dbh->rollback; to undo changes
Finally, when you have finished working with the data source, you should
L</disconnect> from it:
$dbh->disconnect;
=head2 General Interface Rules & Caveats
The DBI does not have a concept of a "current session". Every session
has a handle object (i.e., a C<$dbh>) returned from the C<connect> method.
That handle object is used to invoke database related methods.
Most data is returned to the Perl script as strings. (Null values are
returned as C<undef>.) This allows arbitrary precision numeric data to be
handled without loss of accuracy. Beware that Perl may not preserve
the same accuracy when the string is used as a number.
Dates and times are returned as character strings in the current
default format of the corresponding database engine. Time zone effects
are database/driver dependent.
Perl supports binary data in Perl strings, and the DBI will pass binary
data to and from the driver without change. It is up to the driver
implementors to decide how they wish to handle such binary data.
Perl supports two kinds of strings: Unicode (utf8 internally) and non-Unicode
(defaults to iso-8859-1 if forced to assume an encoding). Drivers should
accept both kinds of strings and, if required, convert them to the character
set of the database being used. Similarly, when fetching from the database
character data that isn't iso-8859-1 the driver should convert it into utf8.
Multiple SQL statements may not be combined in a single statement
handle (C<$sth>), although some databases and drivers do support this
(notably Sybase and SQL Server).
Non-sequential record reads are not supported in this version of the DBI.
In other words, records can only be fetched in the order that the
database returned them, and once fetched they are forgotten.
Positioned updates and deletes are not directly supported by the DBI.
See the description of the C<CursorName> attribute for an alternative.
Individual driver implementors are free to provide any private
functions and/or handle attributes that they feel are useful.
Private driver functions can be invoked using the DBI C<func()> method.
Private driver attributes are accessed just like standard attributes.
Many methods have an optional C<\%attr> parameter which can be used to
pass information to the driver implementing the method. Except where
specifically documented, the C<\%attr> parameter can only be used to pass
driver specific hints. In general, you can ignore C<\%attr> parameters
or pass it as C<undef>.
=head2 Naming Conventions and Name Space
The DBI package and all packages below it (C<DBI::*>) are reserved for
use by the DBI. Extensions and related modules use the C<DBIx::>
namespace (see L<http://www.perl.com/CPAN/modules/by-module/DBIx/>).
Package names beginning with C<DBD::> are reserved for use
by DBI database drivers. All environment variables used by the DBI
or by individual DBDs begin with "C<DBI_>" or "C<DBD_>".
The letter case used for attribute names is significant and plays an
important part in the portability of DBI scripts. The case of the
attribute name is used to signify who defined the meaning of that name
and its values.
Case of name Has a meaning defined by
------------ ------------------------
UPPER_CASE Standards, e.g., X/Open, ISO SQL92 etc (portable)
MixedCase DBI API (portable), underscores are not used.
lower_case Driver or database engine specific (non-portable)
It is of the utmost importance that Driver developers only use
lowercase attribute names when defining private attributes. Private
attribute names must be prefixed with the driver name or suitable
abbreviation (e.g., "C<ora_>" for Oracle, "C<ing_>" for Ingres, etc).
=head2 SQL - A Query Language
Most DBI drivers require applications to use a dialect of SQL
(Structured Query Language) to interact with the database engine.
The L</"Standards Reference Information"> section provides links
to useful information about SQL.
The DBI itself does not mandate or require any particular language to
be used; it is language independent. In ODBC terms, the DBI is in
"pass-thru" mode, although individual drivers might not be. The only requirement
is that queries and other statements must be expressed as a single
string of characters passed as the first argument to the L</prepare> or
L</do> methods.
For an interesting diversion on the I<real> history of RDBMS and SQL,
from the people who made it happen, see:
http://www.mcjones.org/System_R/SQL_Reunion_95/sqlr95.html
Follow the "Full Contents" then "Intergalactic dataspeak" links for the
SQL history.
=head2 Placeholders and Bind Values
Some drivers support placeholders and bind values.
I<Placeholders>, also called parameter markers, are used to indicate
values in a database statement that will be supplied later,
before the prepared statement is executed. For example, an application
might use the following to insert a row of data into the SALES table:
INSERT INTO sales (product_code, qty, price) VALUES (?, ?, ?)
or the following, to select the description for a product:
SELECT description FROM products WHERE product_code = ?
The C<?> characters are the placeholders. The association of actual
values with placeholders is known as I<binding>, and the values are
referred to as I<bind values>.
Note that the C<?> is not enclosed in quotation marks, even when the
placeholder represents a string.
Some drivers also allow placeholders like C<:>I<name> and C<:>I<N> (e.g.,
C<:1>, C<:2>, and so on) in addition to C<?>, but their use is not portable.
If the C<:>I<N> form of placeholder is supported by the driver you're using,
then you should be able to use either L</bind_param> or L</execute> to bind
values. Check your driver documentation.
Some drivers allow you to prevent the recognition of a placeholder by placing a
single backslash character (C<\>) immediately before it. The driver will remove
the backslash character and ignore the placeholder, passing it unchanged to the
backend. If the driver supports this then L</get_info>(9000) will return true.
With most drivers, placeholders can't be used for any element of a
statement that would prevent the database server from validating the
statement and creating a query execution plan for it. For example:
"SELECT name, age FROM ?" # wrong (will probably fail)
"SELECT name, ? FROM people" # wrong (but may not 'fail')
Also, placeholders can only represent single scalar values.
For example, the following
statement won't work as expected for more than one value:
"SELECT name, age FROM people WHERE name IN (?)" # wrong
"SELECT name, age FROM people WHERE name IN (?,?)" # two names
When using placeholders with the SQL C<LIKE> qualifier, you must
remember that the placeholder substitutes for the whole string.
So you should use "C<... LIKE ? ...>" and include any wildcard
characters in the value that you bind to the placeholder.
B<NULL Values>
Undefined values, or C<undef>, are used to indicate NULL values.
You can insert and update columns with a NULL value as you would a
non-NULL value. These examples insert and update the column
C<age> with a NULL value:
$sth = $dbh->prepare(qq{
INSERT INTO people (fullname, age) VALUES (?, ?)
});
$sth->execute("Joe Bloggs", undef);
$sth = $dbh->prepare(qq{
UPDATE people SET age = ? WHERE fullname = ?
});
$sth->execute(undef, "Joe Bloggs");
However, care must be taken when trying to use NULL values in a
C<WHERE> clause. Consider:
SELECT fullname FROM people WHERE age = ?
Binding an C<undef> (NULL) to the placeholder will I<not> select rows
which have a NULL C<age>! At least for database engines that
conform to the SQL standard. Refer to the SQL manual for your database
engine or any SQL book for the reasons for this. To explicitly select
NULLs you have to say "C<WHERE age IS NULL>".
A common issue is to have a code fragment handle a value that could be
either C<defined> or C<undef> (non-NULL or NULL) at runtime.
A simple technique is to prepare the appropriate statement as needed,
and substitute the placeholder for non-NULL cases:
$sql_clause = defined $age? "age = ?" : "age IS NULL";
$sth = $dbh->prepare(qq{
SELECT fullname FROM people WHERE $sql_clause
});
$sth->execute(defined $age ? $age : ());
The following technique illustrates qualifying a C<WHERE> clause with
several columns, whose associated values (C<defined> or C<undef>) are
in a hash %h:
for my $col ("age", "phone", "email") {
if (defined $h{$col}) {
push @sql_qual, "$col = ?";
push @sql_bind, $h{$col};
}
else {
push @sql_qual, "$col IS NULL";
}
}
$sql_clause = join(" AND ", @sql_qual);
$sth = $dbh->prepare(qq{
SELECT fullname FROM people WHERE $sql_clause
});
$sth->execute(@sql_bind);
The techniques above call prepare for the SQL statement with each call to
execute. Because calls to prepare() can be expensive, performance
can suffer when an application iterates many times over statements
like the above.
A better solution is a single C<WHERE> clause that supports both
NULL and non-NULL comparisons. Its SQL statement would need to be
prepared only once for all cases, thus improving performance.
Several examples of C<WHERE> clauses that support this are presented
below. But each example lacks portability, robustness, or simplicity.
Whether an example is supported on your database engine depends on
what SQL extensions it provides, and where it supports the C<?>
placeholder in a statement.
0) age = ?
1) NVL(age, xx) = NVL(?, xx)
2) ISNULL(age, xx) = ISNULL(?, xx)
3) DECODE(age, ?, 1, 0) = 1
4) age = ? OR (age IS NULL AND ? IS NULL)
5) age = ? OR (age IS NULL AND SP_ISNULL(?) = 1)
6) age = ? OR (age IS NULL AND ? = 1)
Statements formed with the above C<WHERE> clauses require execute
statements as follows. The arguments are required, whether their
values are C<defined> or C<undef>.
0,1,2,3) $sth->execute($age);
4,5) $sth->execute($age, $age);
6) $sth->execute($age, defined($age) ? 0 : 1);
Example 0 should not work (as mentioned earlier), but may work on
a few database engines anyway (e.g. Sybase). Example 0 is part
of examples 4, 5, and 6, so if example 0 works, these other
examples may work, even if the engine does not properly support
the right hand side of the C<OR> expression.
Examples 1 and 2 are not robust: they require that you provide a
valid column value xx (e.g. '~') which is not present in any row.
That means you must have some notion of what data won't be stored
in the column, and expect clients to adhere to that.
Example 5 requires that you provide a stored procedure (SP_ISNULL
in this example) that acts as a function: it checks whether a value
is null, and returns 1 if it is, or 0 if not.
Example 6, the least simple, is probably the most portable, i.e., it
should work with most, if not all, database engines.
Here is a table that indicates which examples above are known to
work on various database engines:
-----Examples------
0 1 2 3 4 5 6
- - - - - - -
Oracle 9 N Y N Y Y ? Y
Informix IDS 9 N N N Y N Y Y
MS SQL N N Y N Y ? Y
Sybase Y N N N N N Y
AnyData,DBM,CSV Y N N N Y Y* Y
SQLite 3.3 N N N N Y N N
MSAccess N N N N Y N Y
* Works only because Example 0 works.
DBI provides a sample perl script that will test the examples above
on your database engine and tell you which ones work. It is located
in the F<ex/> subdirectory of the DBI source distribution, or here:
L<https://github.com/perl5-dbi/dbi/blob/master/ex/perl_dbi_nulls_test.pl>
Please use the script to help us fill-in and maintain this table.
B<Performance>
Without using placeholders, the insert statement shown previously would have to
contain the literal values to be inserted and would have to be
re-prepared and re-executed for each row. With placeholders, the insert
statement only needs to be prepared once. The bind values for each row
can be given to the C<execute> method each time it's called. By avoiding
the need to re-prepare the statement for each row, the application
typically runs many times faster. Here's an example:
my $sth = $dbh->prepare(q{
INSERT INTO sales (product_code, qty, price) VALUES (?, ?, ?)
}) or die $dbh->errstr;
while (<>) {
chomp;
my ($product_code, $qty, $price) = split /,/;
$sth->execute($product_code, $qty, $price) or die $dbh->errstr;
}
$dbh->commit or die $dbh->errstr;
See L</execute> and L</bind_param> for more details.
The C<q{...}> style quoting used in this example avoids clashing with
quotes that may be used in the SQL statement. Use the double-quote like
C<qq{...}> operator if you want to interpolate variables into the string.
See L<perlop/"Quote and Quote-like Operators"> for more details.
See also the L</bind_columns> method, which is used to associate Perl
variables with the output columns of a C<SELECT> statement.
=head1 THE DBI PACKAGE AND CLASS
In this section, we cover the DBI class methods, utility functions,
and the dynamic attributes associated with generic DBI handles.
=head2 DBI Constants
Constants representing the values of the SQL standard types can be
imported individually by name, or all together by importing the
special C<:sql_types> tag.
The names and values of all the defined SQL standard types can be
produced like this:
foreach (@{ $DBI::EXPORT_TAGS{sql_types} }) {
printf "%s=%d\n", $_, &{"DBI::$_"};
}
These constants are defined by SQL/CLI, ODBC or both.
C<SQL_BIGINT> has conflicting codes in SQL/CLI and ODBC,
DBI uses the ODBC one.
See the L</type_info>, L</type_info_all>, and L</bind_param> methods
for possible uses.
Note that just because the DBI defines a named constant for a given
data type doesn't mean that drivers will support that data type.
=head2 DBI Class Methods
The following methods are provided by the DBI class:
=head3 C<parse_dsn>
($scheme, $driver, $attr_string, $attr_hash, $driver_dsn) = DBI->parse_dsn($dsn)
or die "Can't parse DBI DSN '$dsn'";
Breaks apart a DBI Data Source Name (DSN) and returns the individual
parts. If $dsn doesn't contain a valid DSN then parse_dsn() returns
an empty list.
$scheme is the first part of the DSN and is currently always 'dbi'.
$driver is the driver name, possibly defaulted to $ENV{DBI_DRIVER},
and may be undefined. $attr_string is the contents of the optional attribute
string, which may be undefined. If $attr_string is not empty then $attr_hash
is a reference to a hash containing the parsed attribute names and values.
$driver_dsn is the last part of the DBI DSN string. For example:
($scheme, $driver, $attr_string, $attr_hash, $driver_dsn)
= DBI->parse_dsn("dbi:MyDriver(RaiseError=>1):db=test;port=42");
$scheme = 'dbi';
$driver = 'MyDriver';
$attr_string = 'RaiseError=>1';
$attr_hash = { 'RaiseError' => '1' };
$driver_dsn = 'db=test;port=42';
The parse_dsn() method was added in DBI 1.43.
=head3 C<connect>
$dbh = DBI->connect($data_source, $username, $password)
or die $DBI::errstr;
$dbh = DBI->connect($data_source, $username, $password, \%attr)
or die $DBI::errstr;
Establishes a database connection, or session, to the requested C<$data_source>.
Returns a database handle object if the connection succeeds. Use
C<$dbh-E<gt>disconnect> to terminate the connection.
If the connect fails (see below), it returns C<undef> and sets both C<$DBI::err>
and C<$DBI::errstr>. (It does I<not> explicitly set C<$!>.) You should generally
test the return status of C<connect> and C<print $DBI::errstr> if it has failed.
Multiple simultaneous connections to multiple databases through multiple
drivers can be made via the DBI. Simply make one C<connect> call for each
database and keep a copy of each returned database handle.
The C<$data_source> value must begin with "C<dbi:>I<driver_name>C<:>".
The I<driver_name> specifies the driver that will be used to make the
connection. (Letter case is significant.)
As a convenience, if the C<$data_source> parameter is undefined or empty,
the DBI will substitute the value of the environment variable C<DBI_DSN>.
If just the I<driver_name> part is empty (i.e., the C<$data_source>
prefix is "C<dbi::>"), the environment variable C<DBI_DRIVER> is
used. If neither variable is set, then C<connect> dies.
Examples of C<$data_source> values are:
dbi:DriverName:database_name
dbi:DriverName:database_name@hostname:port
dbi:DriverName:database=database_name;host=hostname;port=port
There is I<no standard> for the text following the driver name. Each
driver is free to use whatever syntax it wants. The only requirement the
DBI makes is that all the information is supplied in a single string.
You must consult the documentation for the drivers you are using for a
description of the syntax they require.
It is recommended that drivers support the ODBC style, shown in the
last example above. It is also recommended that they support the
three common names 'C<host>', 'C<port>', and 'C<database>' (plus 'C<db>'
as an alias for C<database>). This simplifies automatic construction
of basic DSNs: C<"dbi:$driver:database=$db;host=$host;port=$port">.
Drivers should aim to 'do something reasonable' when given a DSN
in this form, but if any part is meaningless for that driver (such
as 'port' for Informix) it should generate an error if that part
is not empty.
If the environment variable C<DBI_AUTOPROXY> is defined (and the
driver in C<$data_source> is not "C<Proxy>") then the connect request
will automatically be changed to:
$ENV{DBI_AUTOPROXY};dsn=$data_source
C<DBI_AUTOPROXY> is typically set as "C<dbi:Proxy:hostname=...;port=...>".
If $ENV{DBI_AUTOPROXY} doesn't begin with 'C<dbi:>' then "dbi:Proxy:"
will be prepended to it first. See the DBD::Proxy documentation
for more details.
If C<$username> or C<$password> are undefined (rather than just empty),
then the DBI will substitute the values of the C<DBI_USER> and C<DBI_PASS>
environment variables, respectively. The DBI will warn if the
environment variables are not defined. However, the everyday use
of these environment variables is not recommended for security
reasons. The mechanism is primarily intended to simplify testing.
See below for alternative way to specify the username and password.
C<DBI-E<gt>connect> automatically installs the driver if it has not been
installed yet. Driver installation either returns a valid driver
handle, or it I<dies> with an error message that includes the string
"C<install_driver>" and the underlying problem. So C<DBI-E<gt>connect>
will die
on a driver installation failure and will only return C<undef> on a
connect failure, in which case C<$DBI::errstr> will hold the error message.
Use C<eval> if you need to catch the "C<install_driver>" error.
The C<$data_source> argument (with the "C<dbi:...:>" prefix removed) and the
C<$username> and C<$password> arguments are then passed to the driver for
processing. The DBI does not define any interpretation for the
contents of these fields. The driver is free to interpret the
C<$data_source>, C<$username>, and C<$password> fields in any way, and supply
whatever defaults are appropriate for the engine being accessed.
(Oracle, for example, uses the ORACLE_SID and TWO_TASK environment
variables if no C<$data_source> is specified.)
The C<AutoCommit> and C<PrintError> attributes for each connection
default to "on". (See L</AutoCommit> and L</PrintError> for more information.)
However, it is strongly recommended that you explicitly define C<AutoCommit>
rather than rely on the default. The C<PrintWarn> attribute defaults to true.
The C<\%attr> parameter can be used to alter the default settings of
C<PrintError>, C<RaiseError>, C<AutoCommit>, and other attributes. For example:
$dbh = DBI->connect($data_source, $user, $pass, {
PrintError => 0,
AutoCommit => 0
});
The username and password can also be specified using the attributes
C<Username> and C<Password>, in which case they take precedence
over the C<$username> and C<$password> parameters.
You can also define connection attribute values within the C<$data_source>
parameter. For example:
dbi:DriverName(PrintWarn=>0,PrintError=>0,Taint=>1):...
Individual attributes values specified in this way take precedence over
any conflicting values specified via the C<\%attr> parameter to C<connect>.
The C<dbi_connect_method> attribute can be used to specify which driver
method should be called to establish the connection. The only useful
values are 'connect', 'connect_cached', or some specialized case like
'Apache::DBI::connect' (which is automatically the default when running
within Apache).
Where possible, each session (C<$dbh>) is independent from the transactions
in other sessions. This is useful when you need to hold cursors open
across transactions--for example, if you use one session for your long lifespan
cursors (typically read-only) and another for your short update
transactions.
For compatibility with old DBI scripts, the driver can be specified by
passing its name as the fourth argument to C<connect> (instead of C<\%attr>):
$dbh = DBI->connect($data_source, $user, $pass, $driver);
In this "old-style" form of C<connect>, the C<$data_source> should not start
with "C<dbi:driver_name:>". (If it does, the embedded driver_name
will be ignored). Also note that in this older form of C<connect>,
the C<$dbh-E<gt>{AutoCommit}> attribute is I<undefined>, the
C<$dbh-E<gt>{PrintError}> attribute is off, and the old C<DBI_DBNAME>
environment variable is
checked if C<DBI_DSN> is not defined. Beware that this "old-style"
C<connect> will soon be withdrawn in a future version of DBI.
=head3 C<connect_cached>
$dbh = DBI->connect_cached($data_source, $username, $password)
or die $DBI::errstr;
$dbh = DBI->connect_cached($data_source, $username, $password, \%attr)
or die $DBI::errstr;
C<connect_cached> is like L</connect>, except that the database handle
returned is also
stored in a hash associated with the given parameters. If another call
is made to C<connect_cached> with the same parameter values, then the
corresponding cached C<$dbh> will be returned if it is still valid.
The cached database handle is replaced with a new connection if it
has been disconnected or if the C<ping> method fails.
Note that the behaviour of this method differs in several respects from the
behaviour of persistent connections implemented by Apache::DBI.
However, if Apache::DBI is loaded then C<connect_cached> will use it.
Caching connections can be useful in some applications, but it can
also cause problems, such as too many connections, and so should
be used with care. In particular, avoid changing the attributes of
a database handle created via connect_cached() because it will affect
other code that may be using the same handle. When connect_cached()
returns a handle the attributes will be reset to their initial values.
This can cause problems, especially with the C<AutoCommit> attribute.
Also, to ensure that the attributes passed are always the same, avoid passing
references inline. For example, the C<Callbacks> attribute is specified as a
hash reference. Be sure to declare it external to the call to
connect_cached(), such that the hash reference is not re-created on every
call. A package-level lexical works well:
package MyDBH;
my $cb = {
'connect_cached.reused' => sub { delete $_[4]->{AutoCommit} },
};
sub dbh {
DBI->connect_cached( $dsn, $username, $auth, { Callbacks => $cb });
}
Where multiple separate parts of a program are using connect_cached()
to connect to the same database with the same (initial) attributes
it is a good idea to add a private attribute to the connect_cached()
call to effectively limit the scope of the caching. For example:
DBI->connect_cached(..., { private_foo_cachekey => "Bar", ... });
Handles returned from that connect_cached() call will only be returned
by other connect_cached() call elsewhere in the code if those other
calls also pass in the same attribute values, including the private one.
(I've used C<private_foo_cachekey> here as an example, you can use
any attribute name with a C<private_> prefix.)
Taking that one step further, you can limit a particular connect_cached()
call to return handles unique to that one place in the code by setting the
private attribute to a unique value for that place:
DBI->connect_cached(..., { private_foo_cachekey => __FILE__.__LINE__, ... });
By using a private attribute you still get connection caching for
the individual calls to connect_cached() but, by making separate
database connections for separate parts of the code, the database
handles are isolated from any attribute changes made to other handles.
The cache can be accessed (and cleared) via the L</CachedKids> attribute:
my $CachedKids_hashref = $dbh->{Driver}->{CachedKids};
%$CachedKids_hashref = () if $CachedKids_hashref;
=head3 C<available_drivers>
@ary = DBI->available_drivers;
@ary = DBI->available_drivers($quiet);
Returns a list of all available drivers by searching for C<DBD::*> modules
through the directories in C<@INC>. By default, a warning is given if
some drivers are hidden by others of the same name in earlier
directories. Passing a true value for C<$quiet> will inhibit the warning.
=head3 C<installed_drivers>
%drivers = DBI->installed_drivers();
Returns a list of driver name and driver handle pairs for all drivers
'installed' (loaded) into the current process. The driver name does not
include the 'DBD::' prefix.
To get a list of all drivers available in your perl installation you can use
L</available_drivers>.
Added in DBI 1.49.
=head3 C<installed_versions>
DBI->installed_versions;
@ary = DBI->installed_versions;
$hash = DBI->installed_versions;
Calls available_drivers() and attempts to load each of them in turn
using install_driver(). For each load that succeeds the driver
name and version number are added to a hash. When running under
L<DBI::PurePerl> drivers which appear not be pure-perl are ignored.
When called in array context the list of successfully loaded drivers
is returned (without the 'DBD::' prefix).
When called in scalar context an extra entry for the C<DBI> is added (and
C<DBI::PurePerl> if appropriate) and a reference to the hash is returned.
When called in a void context the installed_versions() method will
print out a formatted list of the hash contents, one per line, along with some
other information about the DBI version and OS.
Due to the potentially high memory cost and unknown risks of loading
in an unknown number of drivers that just happen to be installed
on the system, this method is not recommended for general use.
Use available_drivers() instead.
The installed_versions() method is primarily intended as a quick
way to see from the command line what's installed. For example:
perl -MDBI -e 'DBI->installed_versions'
The installed_versions() method was added in DBI 1.38.
=head3 C<data_sources>
@ary = DBI->data_sources($driver);
@ary = DBI->data_sources($driver, \%attr);
Returns a list of data sources (databases) available via the named
driver. If C<$driver> is empty or C<undef>, then the value of the
C<DBI_DRIVER> environment variable is used.
The driver will be loaded if it hasn't been already. Note that if the
driver loading fails then data_sources() I<dies> with an error message
that includes the string "C<install_driver>" and the underlying problem.
Data sources are returned in a form suitable for passing to the
L</connect> method (that is, they will include the "C<dbi:$driver:>" prefix).
Note that many drivers have no way of knowing what data sources might
be available for it. These drivers return an empty or incomplete list
or may require driver-specific attributes.
There is also a data_sources() method defined for database handles.
=head3 C<trace>
DBI->trace($trace_setting)
DBI->trace($trace_setting, $trace_filename)
DBI->trace($trace_setting, $trace_filehandle)
$trace_setting = DBI->trace;
The C<DBI-E<gt>trace> method sets the I<global default> trace
settings and returns the I<previous> trace settings. It can also
be used to change where the trace output is sent.
There's a similar method, C<$h-E<gt>trace>, which sets the trace
settings for the specific handle it's called on.
See the L</TRACING> section for full details about the DBI's powerful
tracing facilities.
=head3 C<visit_handles>
DBI->visit_handles( $coderef );
DBI->visit_handles( $coderef, $info );
Where $coderef is a reference to a subroutine and $info is an arbitrary value
which, if undefined, defaults to a reference to an empty hash. Returns $info.
For each installed driver handle, if any, $coderef is invoked as:
$coderef->($driver_handle, $info);
If the execution of $coderef returns a true value then L</visit_child_handles>
is called on that child handle and passed the returned value as $info.
For example:
my $info = $dbh->{Driver}->visit_child_handles(sub {
my ($h, $info) = @_;
++$info->{ $h->{Type} }; # count types of handles (dr/db/st)
return $info; # visit kids
});
See also L</visit_child_handles>.
=head2 DBI Utility Functions
In addition to the DBI methods listed in the previous section,
the DBI package also provides several utility functions.
These can be imported into your code by listing them in
the C<use> statement. For example:
use DBI qw(neat data_diff);
Alternatively, all these utility functions (except hash) can be
imported using the C<:utils> import tag. For example:
use DBI qw(:utils);
=head3 C<data_string_desc>
$description = data_string_desc($string);
Returns an informal description of the string. For example:
UTF8 off, ASCII, 42 characters 42 bytes
UTF8 off, non-ASCII, 42 characters 42 bytes
UTF8 on, non-ASCII, 4 characters 6 bytes
UTF8 on but INVALID encoding, non-ASCII, 4 characters 6 bytes
UTF8 off, undef
The initial C<UTF8> on/off refers to Perl's internal SvUTF8 flag.
If $string has the SvUTF8 flag set but the sequence of bytes it
contains are not a valid UTF-8 encoding then data_string_desc()
will report C<UTF8 on but INVALID encoding>.
The C<ASCII> vs C<non-ASCII> portion shows C<ASCII> if I<all> the
characters in the string are ASCII (have code points <= 127).
The data_string_desc() function was added in DBI 1.46.
=head3 C<data_string_diff>
$diff = data_string_diff($a, $b);
Returns an informal description of the first character difference
between the strings. If both $a and $b contain the same sequence
of characters then data_string_diff() returns an empty string.
For example:
Params a & b Result
------------ ------
'aaa', 'aaa' ''
'aaa', 'abc' 'Strings differ at index 2: a[2]=a, b[2]=b'
'aaa', undef 'String b is undef, string a has 3 characters'
'aaa', 'aa' 'String b truncated after 2 characters'
Unicode characters are reported in C<\x{XXXX}> format. Unicode
code points in the range U+0800 to U+08FF are unassigned and most
likely to occur due to double-encoding. Characters in this range
are reported as C<\x{08XX}='C'> where C<C> is the corresponding
latin-1 character.
The data_string_diff() function only considers logical I<characters>
and not the underlying encoding. See L</data_diff> for an alternative.
The data_string_diff() function was added in DBI 1.46.
=head3 C<data_diff>
$diff = data_diff($a, $b);
$diff = data_diff($a, $b, $logical);
Returns an informal description of the difference between two strings.
It calls L</data_string_desc> and L</data_string_diff>
and returns the combined results as a multi-line string.
For example, C<data_diff("abc", "ab\x{263a}")> will return:
a: UTF8 off, ASCII, 3 characters 3 bytes
b: UTF8 on, non-ASCII, 3 characters 5 bytes
Strings differ at index 2: a[2]=c, b[2]=\x{263A}
If $a and $b are identical in both the characters they contain I<and>
their physical encoding then data_diff() returns an empty string.
If $logical is true then physical encoding differences are ignored
(but are still reported if there is a difference in the characters).
The data_diff() function was added in DBI 1.46.
=head3 C<neat>
$str = neat($value);
$str = neat($value, $maxlen);
Return a string containing a neat (and tidy) representation of the
supplied value.
Strings will be quoted, although internal quotes will I<not> be escaped.
Values known to be numeric will be unquoted. Undefined (NULL) values
will be shown as C<undef> (without quotes).
If the string is flagged internally as utf8 then double quotes will
be used, otherwise single quotes are used and unprintable characters
will be replaced by dot (.).
For result strings longer than C<$maxlen> the result string will be
truncated to C<$maxlen-4> and "C<...'>" will be appended. If C<$maxlen> is 0
or C<undef>, it defaults to C<$DBI::neat_maxlen> which, in turn, defaults to 400.
This function is designed to format values for human consumption.
It is used internally by the DBI for L</trace> output. It should
typically I<not> be used for formatting values for database use.
(See also L</quote>.)
=head3 C<neat_list>
$str = neat_list(\@listref, $maxlen, $field_sep);
Calls C<neat> on each element of the list and returns a string
containing the results joined with C<$field_sep>. C<$field_sep> defaults
to C<", ">.
=head3 C<looks_like_number>
@bool = looks_like_number(@array);
Returns true for each element that looks like a number.
Returns false for each element that does not look like a number.
Returns C<undef> for each element that is undefined or empty.
=head3 C<hash>
$hash_value = DBI::hash($buffer, $type);
Return a 32-bit integer 'hash' value corresponding to the contents of $buffer.
The $type parameter selects which kind of hash algorithm should be used.
For the technically curious, type 0 (which is the default if $type
isn't specified) is based on the Perl 5.1 hash except that the value
is forced to be negative (for obscure historical reasons).
Type 1 is the better "Fowler / Noll / Vo" (FNV) hash. See
L<http://www.isthe.com/chongo/tech/comp/fnv/> for more information.
Both types are implemented in C and are very fast.
This function doesn't have much to do with databases, except that
it can sometimes be handy to store such values in a database.
It also doesn't have much to do with perl hashes, like %foo.
=head3 C<sql_type_cast>
$sts = DBI::sql_type_cast($sv, $sql_type, $flags);
sql_type_cast attempts to cast C<$sv> to the SQL type (see L<DBI
Constants>) specified in C<$sql_type>. At present only the SQL types
C<SQL_INTEGER>, C<SQL_DOUBLE> and C<SQL_NUMERIC> are supported.
For C<SQL_INTEGER> the effect is similar to using the value in an expression
that requires an integer. It gives the perl scalar an 'integer aspect'.
(Technically the value gains an IV, or possibly a UV or NV if the value is too
large for an IV.)
For C<SQL_DOUBLE> the effect is similar to using the value in an expression
that requires a general numeric value. It gives the perl scalar a 'numeric
aspect'. (Technically the value gains an NV.)
C<SQL_NUMERIC> is similar to C<SQL_INTEGER> or C<SQL_DOUBLE> but more
general and more cautious. It will look at the string first and if it
looks like an integer (that will fit in an IV or UV) it will act like
C<SQL_INTEGER>, if it looks like a floating point value it will act
like C<SQL_DOUBLE>, if it looks like neither then it will do nothing -
and thereby avoid the warnings that would be generated by
C<SQL_INTEGER> and C<SQL_DOUBLE> when given non-numeric data.
C<$flags> may be:
=over 4
=item C<DBIstcf_DISCARD_STRING>
If this flag is specified then when the driver successfully casts the
bound perl scalar to a non-string type then the string portion of the
scalar will be discarded.
=item C<DBIstcf_STRICT>
If C<$sv> cannot be cast to the requested C<$sql_type> then by default
it is left untouched and no error is generated. If you specify
C<DBIstcf_STRICT> and the cast fails, this will generate an error.
=back
The returned C<$sts> value is:
-2 sql_type is not handled
-1 sv is undef so unchanged
0 sv could not be cast cleanly and DBIstcf_STRICT was used
1 sv could not be cast and DBIstcf_STRICT was not used
2 sv was cast successfully
This method is exported by the :utils tag and was introduced in DBI
1.611.
=head2 DBI Dynamic Attributes
Dynamic attributes are always associated with the I<last handle used>
(that handle is represented by C<$h> in the descriptions below).
Where an attribute is equivalent to a method call, then refer to
the method call for all related documentation.
Warning: these attributes are provided as a convenience but they
do have limitations. Specifically, they have a short lifespan:
because they are associated with
the last handle used, they should only be used I<immediately> after
calling the method that "sets" them.
If in any doubt, use the corresponding method call.
=head3 C<$DBI::err>
Equivalent to C<$h-E<gt>err>.
=head3 C<$DBI::errstr>
Equivalent to C<$h-E<gt>errstr>.
=head3 C<$DBI::state>
Equivalent to C<$h-E<gt>state>.
=head3 C<$DBI::rows>
Equivalent to C<$h-E<gt>rows>. Please refer to the documentation
for the L</rows> method.
=head3 C<$DBI::lasth>
Returns the DBI object handle used for the most recent DBI method call.
If the last DBI method call was a DESTROY then $DBI::lasth will return
the handle of the parent of the destroyed handle, if there is one.
=head1 METHODS COMMON TO ALL HANDLES
The following methods can be used by all types of DBI handles.
=head3 C<err>
$rv = $h->err;
Returns the I<native> database engine error code from the last driver
method called. The code is typically an integer but you should not
assume that.
The DBI resets $h->err to undef before almost all DBI method calls, so the
value only has a short lifespan. Also, for most drivers, the statement
handles share the same error variable as the parent database handle,
so calling a method on one handle may reset the error on the
related handles.
(Methods which don't reset err before being called include err() and errstr(),
obviously, state(), rows(), func(), trace(), trace_msg(), ping(), and the
tied hash attribute FETCH() and STORE() methods.)
If you need to test for specific error conditions I<and> have your program be
portable to different database engines, then you'll need to determine what the
corresponding error codes are for all those engines and test for all of them.
The DBI uses the value of $DBI::stderr as the C<err> value for internal errors.
Drivers should also do likewise. The default value for $DBI::stderr is 2000000000.
A driver may return C<0> from err() to indicate a warning condition
after a method call. Similarly, a driver may return an empty string
to indicate a 'success with information' condition. In both these
cases the value is false but not undef. The errstr() and state()
methods may be used to retrieve extra information in these cases.
See L</set_err> for more information.
=head3 C<errstr>
$str = $h->errstr;
Returns the native database engine error message from the last DBI
method called. This has the same lifespan issues as the L</err> method
described above.
The returned string may contain multiple messages separated by
newline characters.
The errstr() method should not be used to test for errors, use err()
for that, because drivers may return 'success with information' or
warning messages via errstr() for methods that have not 'failed'.
See L</set_err> for more information.
=head3 C<state>
$str = $h->state;
Returns a state code in the standard SQLSTATE five character format.
Note that the specific success code C<00000> is translated to any empty string
(false). If the driver does not support SQLSTATE (and most don't),
then state() will return C<S1000> (General Error) for all errors.
The driver is free to return any value via C<state>, e.g., warning
codes, even if it has not declared an error by returning a true value
via the L</err> method described above.
The state() method should not be used to test for errors, use err()
for that, because drivers may return a 'success with information' or
warning state code via state() for methods that have not 'failed'.
=head3 C<set_err>
$rv = $h->set_err($err, $errstr);
$rv = $h->set_err($err, $errstr, $state);
$rv = $h->set_err($err, $errstr, $state, $method);
$rv = $h->set_err($err, $errstr, $state, $method, $rv);
Set the C<err>, C<errstr>, and C<state> values for the handle.
This method is typically only used by DBI drivers and DBI subclasses.
If the L</HandleSetErr> attribute holds a reference to a subroutine
it is called first. The subroutine can alter the $err, $errstr, $state,
and $method values. See L</HandleSetErr> for full details.
If the subroutine returns a true value then the handle C<err>,
C<errstr>, and C<state> values are not altered and set_err() returns
an empty list (it normally returns $rv which defaults to undef, see below).
Setting C<err> to a I<true> value indicates an error and will trigger
the normal DBI error handling mechanisms, such as C<RaiseError> and
C<HandleError>, if they are enabled, when execution returns from
the DBI back to the application.
Setting C<err> to C<""> indicates an 'information' state, and setting
it to C<"0"> indicates a 'warning' state. Setting C<err> to C<undef>
also sets C<errstr> to undef, and C<state> to C<"">, irrespective
of the values of the $errstr and $state parameters.
The $method parameter provides an alternate method name for the
C<RaiseError>/C<PrintError>/C<PrintWarn> error string instead of
the fairly unhelpful 'C<set_err>'.
The C<set_err> method normally returns undef. The $rv parameter
provides an alternate return value.
Some special rules apply if the C<err> or C<errstr>
values for the handle are I<already> set...
If C<errstr> is true then: "C< [err was %s now %s]>" is appended if $err is
true and C<err> is already true and the new err value differs from the original
one. Similarly "C< [state was %s now %s]>" is appended if $state is true and C<state> is
already true and the new state value differs from the original one. Finally
"C<\n>" and the new $errstr are appended if $errstr differs from the existing
errstr value. Obviously the C<%s>'s above are replaced by the corresponding values.
The handle C<err> value is set to $err if: $err is true; or handle
C<err> value is undef; or $err is defined and the length is greater
than the handle C<err> length. The effect is that an 'information'
state only overrides undef; a 'warning' overrides undef or 'information',
and an 'error' state overrides anything.
The handle C<state> value is set to $state if $state is true and
the handle C<err> value was set (by the rules above).
Support for warning and information states was added in DBI 1.41.
=head3 C<trace>
$h->trace($trace_settings);
$h->trace($trace_settings, $trace_filename);
$trace_settings = $h->trace;
The trace() method is used to alter the trace settings for a handle
(and any future children of that handle). It can also be used to
change where the trace output is sent.
There's a similar method, C<DBI-E<gt>trace>, which sets the global
default trace settings.
See the L</TRACING> section for full details about the DBI's powerful
tracing facilities.
=head3 C<trace_msg>
$h->trace_msg($message_text);
$h->trace_msg($message_text, $min_level);
Writes C<$message_text> to the trace file if the trace level is
greater than or equal to $min_level (which defaults to 1).
Can also be called as C<DBI-E<gt>trace_msg($msg)>.
See L</TRACING> for more details.
=head3 C<func>
$h->func(@func_arguments, $func_name) or die ...;
The C<func> method can be used to call private non-standard and
non-portable methods implemented by the driver. Note that the function
name is given as the I<last> argument.
It's also important to note that the func() method does not clear
a previous error ($DBI::err etc.) and it does not trigger automatic
error detection (RaiseError etc.) so you must check the return
status and/or $h->err to detect errors.
(This method is not directly related to calling stored procedures.
Calling stored procedures is currently not defined by the DBI.
Some drivers, such as DBD::Oracle, support it in non-portable ways.
See driver documentation for more details.)
See also install_method() in L<DBI::DBD> for how you can avoid needing to
use func() and gain direct access to driver-private methods.
=head3 C<can>
$is_implemented = $h->can($method_name);
Returns true if $method_name is implemented by the driver or a
default method is provided by the DBI's driver base class.
It returns false where a driver hasn't implemented a method and the
default method is provided by the DBI's driver base class is just an empty stub.
=head3 C<parse_trace_flags>
$trace_settings_integer = $h->parse_trace_flags($trace_settings);
Parses a string containing trace settings and returns the corresponding
integer value used internally by the DBI and drivers.
The $trace_settings argument is a string containing a trace level
between 0 and 15 and/or trace flag names separated by vertical bar
("C<|>") or comma ("C<,>") characters. For example: C<"SQL|3|foo">.
It uses the parse_trace_flag() method, described below, to process
the individual trace flag names.
The parse_trace_flags() method was added in DBI 1.42.
=head3 C<parse_trace_flag>
$bit_flag = $h->parse_trace_flag($trace_flag_name);
Returns the bit flag corresponding to the trace flag name in
$trace_flag_name. Drivers are expected to override this method and
check if $trace_flag_name is a driver specific trace flags and, if
not, then call the DBI's default parse_trace_flag().
The parse_trace_flag() method was added in DBI 1.42.
=head3 C<private_attribute_info>
$hash_ref = $h->private_attribute_info();
Returns a reference to a hash whose keys are the names of driver-private
handle attributes available for the kind of handle (driver, database, statement)
that the method was called on.
For example, the return value when called with a DBD::Sybase $dbh could look like this:
{
syb_dynamic_supported => undef,
syb_oc_version => undef,
syb_server_version => undef,
syb_server_version_string => undef,
}
and when called with a DBD::Sybase $sth they could look like this:
{
syb_types => undef,
syb_proc_status => undef,
syb_result_type => undef,
}
The values should be undef. Meanings may be assigned to particular values in future.
=head3 C<swap_inner_handle>
$rc = $h1->swap_inner_handle( $h2 );
$rc = $h1->swap_inner_handle( $h2, $allow_reparent );
Brain transplants for handles. You don't need to know about this
unless you want to become a handle surgeon.
A DBI handle is a reference to a tied hash. A tied hash has an
I<inner> hash that actually holds the contents. The swap_inner_handle()
method swaps the inner hashes between two handles. The $h1 and $h2
handles still point to the same tied hashes, but what those hashes
are tied to has been swapped. In effect $h1 I<becomes> $h2 and
vice-versa. This is powerful stuff, expect problems. Use with care.
As a small safety measure, the two handles, $h1 and $h2, have to
share the same parent unless $allow_reparent is true.
The swap_inner_handle() method was added in DBI 1.44.
Here's a quick kind of 'diagram' as a worked example to help think about what's
happening:
Original state:
dbh1o -> dbh1i
sthAo -> sthAi(dbh1i)
dbh2o -> dbh2i
swap_inner_handle dbh1o with dbh2o:
dbh2o -> dbh1i
sthAo -> sthAi(dbh1i)
dbh1o -> dbh2i
create new sth from dbh1o:
dbh2o -> dbh1i
sthAo -> sthAi(dbh1i)
dbh1o -> dbh2i
sthBo -> sthBi(dbh2i)
swap_inner_handle sthAo with sthBo:
dbh2o -> dbh1i
sthBo -> sthAi(dbh1i)
dbh1o -> dbh2i
sthAo -> sthBi(dbh2i)
=head3 C<visit_child_handles>
$h->visit_child_handles( $coderef );
$h->visit_child_handles( $coderef, $info );
Where $coderef is a reference to a subroutine and $info is an arbitrary value
which, if undefined, defaults to a reference to an empty hash. Returns $info.
For each child handle of $h, if any, $coderef is invoked as:
$coderef->($child_handle, $info);
If the execution of $coderef returns a true value then C<visit_child_handles>
is called on that child handle and passed the returned value as $info.
For example:
# count database connections with names (DSN) matching a pattern
my $connections = 0;
$dbh->{Driver}->visit_child_handles(sub {
my ($h, $info) = @_;
++$connections if $h->{Name} =~ /foo/;
return 0; # don't visit kids
})
See also L</visit_handles>.
=head1 ATTRIBUTES COMMON TO ALL HANDLES
These attributes are common to all types of DBI handles.
Some attributes are inherited by child handles. That is, the value
of an inherited attribute in a newly created statement handle is the
same as the value in the parent database handle. Changes to attributes
in the new statement handle do not affect the parent database handle
and changes to the database handle do not affect existing statement
handles, only future ones.
Attempting to set or get the value of an unknown attribute generates a warning,
except for private driver specific attributes (which all have names
starting with a lowercase letter).
Example:
$h->{AttributeName} = ...; # set/write
... = $h->{AttributeName}; # get/read
=head3 C<Warn>
Type: boolean, inherited
The C<Warn> attribute enables useful warnings for certain bad
practices. It is enabled by default and should only be disabled in
rare circumstances. Since warnings are generated using the Perl
C<warn> function, they can be intercepted using the Perl C<$SIG{__WARN__}>
hook.
The C<Warn> attribute is not related to the C<PrintWarn> attribute.
=head3 C<Active>
Type: boolean, read-only
The C<Active> attribute is true if the handle object is "active". This is rarely used in
applications. The exact meaning of active is somewhat vague at the
moment. For a database handle it typically means that the handle is
connected to a database (C<$dbh-E<gt>disconnect> sets C<Active> off). For
a statement handle it typically means that the handle is a C<SELECT>
that may have more data to fetch. (Fetching all the data or calling C<$sth-E<gt>finish>
sets C<Active> off.)
=head3 C<Executed>
Type: boolean
The C<Executed> attribute is true if the handle object has been "executed".
Currently only the $dbh do() method and the $sth execute(), execute_array(),
and execute_for_fetch() methods set the C<Executed> attribute.
When it's set on a handle it is also set on the parent handle at the
same time. So calling execute() on a $sth also sets the C<Executed>
attribute on the parent $dbh.
The C<Executed> attribute for a database handle is cleared by the commit() and
rollback() methods (even if they fail). The C<Executed> attribute of a
statement handle is not cleared by the DBI under any circumstances and so acts
as a permanent record of whether the statement handle was ever used.
The C<Executed> attribute was added in DBI 1.41.
=head3 C<Kids>
Type: integer, read-only
For a driver handle, C<Kids> is the number of currently existing database
handles that were created from that driver handle. For a database
handle, C<Kids> is the number of currently existing statement handles that
were created from that database handle.
For a statement handle, the value is zero.
=head3 C<ActiveKids>
Type: integer, read-only
Like C<Kids>, but only counting those that are C<Active> (as above).
=head3 C<CachedKids>
Type: hash ref
For a database handle, C<CachedKids> returns a reference to the cache (hash) of
statement handles created by the L</prepare_cached> method. For a
driver handle, returns a reference to the cache (hash) of
database handles created by the L</connect_cached> method.
=head3 C<Type>
Type: scalar, read-only
The C<Type> attribute identifies the type of a DBI handle. Returns
"dr" for driver handles, "db" for database handles and "st" for
statement handles.
=head3 C<ChildHandles>
Type: array ref
The ChildHandles attribute contains a reference to an array of all the
handles created by this handle which are still accessible. The
contents of the array are weak-refs and will become undef when the
handle goes out of scope. (They're cleared out occasionally.)
C<ChildHandles> returns undef if your perl version does not support weak
references (check the L<Scalar::Util|Scalar::Util> module). The referenced
array returned should be treated as read-only.
For example, to enumerate all driver handles, database handles and
statement handles:
sub show_child_handles {
my ($h, $level) = @_;
printf "%sh %s %s\n", $h->{Type}, "\t" x $level, $h;
show_child_handles($_, $level + 1)
for (grep { defined } @{$h->{ChildHandles}});
}
my %drivers = DBI->installed_drivers();
show_child_handles($_, 0) for (values %drivers);
=head3 C<CompatMode>
Type: boolean, inherited
The C<CompatMode> attribute is used by emulation layers (such as
Oraperl) to enable compatible behaviour in the underlying driver
(e.g., DBD::Oracle) for this handle. Not normally set by application code.
It also has the effect of disabling the 'quick FETCH' of attribute
values from the handles attribute cache. So all attribute values
are handled by the drivers own FETCH method. This makes them slightly
slower but is useful for special-purpose drivers like DBD::Multiplex.
=head3 C<InactiveDestroy>
Type: boolean
The default value, false, means a handle will be fully destroyed
as normal when the last reference to it is removed, just as you'd expect.
If set true then the handle will be treated by the DESTROY as if it was no
longer Active, and so the I<database engine> related effects of DESTROYing a
handle will be skipped. Think of the name as meaning 'treat the handle as
not-Active in the DESTROY method'.
For a database handle, this attribute does not disable an I<explicit>
call to the disconnect method, only the implicit call from DESTROY
that happens if the handle is still marked as C<Active>.
This attribute is specifically designed for use in Unix applications
that "fork" child processes. For some drivers, when the child process exits
the destruction of inherited handles cause the corresponding handles in the
parent process to cease working.
Either the parent or the child process, but not both, should set
C<InactiveDestroy> true on all their shared handles. Alternatively, and
preferably, the L</AutoInactiveDestroy> can be set in the parent on connect.
To help tracing applications using fork the process id is shown in
the trace log whenever a DBI or handle trace() method is called.
The process id also shown for I<every> method call if the DBI trace
level (not handle trace level) is set high enough to show the trace
from the DBI's method dispatcher, e.g. >= 9.
=head3 C<AutoInactiveDestroy>
Type: boolean, inherited
The L</InactiveDestroy> attribute, described above, needs to be explicitly set
in the child process after a fork(), on every active database and statement handle.
This is a problem if the code that performs the fork() is not under your
control, perhaps in a third-party module. Use C<AutoInactiveDestroy> to get
around this situation.
If set true, the DESTROY method will check the process id of the handle and, if
different from the current process id, it will set the I<InactiveDestroy> attribute.
It is strongly recommended that C<AutoInactiveDestroy> is enabled on all new code
(it's only not enabled by default to avoid backwards compatibility problems).
This is the example it's designed to deal with:
my $dbh = DBI->connect(...);
some_code_that_forks(); # Perhaps without your knowledge
# Child process dies, destroying the inherited dbh
$dbh->do(...); # Breaks because parent $dbh is now broken
The C<AutoInactiveDestroy> attribute was added in DBI 1.614.
=head3 C<PrintWarn>
Type: boolean, inherited
The C<PrintWarn> attribute controls the printing of warnings recorded
by the driver. When set to a true value (the default) the DBI will check method
calls to see if a warning condition has been set. If so, the DBI
will effectively do a C<warn("$class $method warning: $DBI::errstr")>
where C<$class> is the driver class and C<$method> is the name of
the method which failed. E.g.,
DBD::Oracle::db execute warning: ... warning text here ...
If desired, the warnings can be caught and processed using a C<$SIG{__WARN__}>
handler or modules like CGI::Carp and CGI::ErrorWrap.
See also L</set_err> for how warnings are recorded and L</HandleSetErr>
for how to influence it.
Fetching the full details of warnings can require an extra round-trip
to the database server for some drivers. In which case the driver
may opt to only fetch the full details of warnings if the C<PrintWarn>
attribute is true. If C<PrintWarn> is false then these drivers should
still indicate the fact that there were warnings by setting the
warning string to, for example: "3 warnings".
=head3 C<PrintError>
Type: boolean, inherited
The C<PrintError> attribute can be used to force errors to generate warnings (using
C<warn>) in addition to returning error codes in the normal way. When set
"on", any method which results in an error occurring will cause the DBI to
effectively do a C<warn("$class $method failed: $DBI::errstr")> where C<$class>
is the driver class and C<$method> is the name of the method which failed. E.g.,
DBD::Oracle::db prepare failed: ... error text here ...
By default, C<DBI-E<gt>connect> sets C<PrintError> "on".
If desired, the warnings can be caught and processed using a C<$SIG{__WARN__}>
handler or modules like CGI::Carp and CGI::ErrorWrap.
=head3 C<RaiseError>
Type: boolean, inherited
The C<RaiseError> attribute can be used to force errors to raise exceptions rather
than simply return error codes in the normal way. It is "off" by default.
When set "on", any method which results in an error will cause
the DBI to effectively do a C<die("$class $method failed: $DBI::errstr")>,
where C<$class> is the driver class and C<$method> is the name of the method
that failed. E.g.,
DBD::Oracle::db prepare failed: ... error text here ...
If you turn C<RaiseError> on then you'd normally turn C<PrintError> off.
If C<PrintError> is also on, then the C<PrintError> is done first (naturally).
Typically C<RaiseError> is used in conjunction with C<eval>,
or a module like L<Try::Tiny> or L<TryCatch>,
to catch the exception that's been thrown and handle it.
For example:
use Try::Tiny;
try {
...
$sth->execute();
...
} catch {
# $sth->err and $DBI::err will be true if error was from DBI
warn $_; # print the error (which Try::Tiny puts into $_)
... # do whatever you need to deal with the error
};
In the catch block the $DBI::lasth variable can be useful for
diagnosis and reporting if you can't be sure which handle triggered
the error. For example, $DBI::lasth->{Type} and $DBI::lasth->{Statement}.
See also L</Transactions>.
If you want to temporarily turn C<RaiseError> off (inside a library function
that is likely to fail, for example), the recommended way is like this:
{
local $h->{RaiseError}; # localize and turn off for this block
...
}
The original value will automatically and reliably be restored by Perl,
regardless of how the block is exited.
The same logic applies to other attributes, including C<PrintError>.
=head3 C<HandleError>
Type: code ref, inherited
The C<HandleError> attribute can be used to provide your own alternative behaviour
in case of errors. If set to a reference to a subroutine then that
subroutine is called when an error is detected (at the same point that
C<RaiseError> and C<PrintError> are handled).
The subroutine is called with three parameters: the error message
string that C<RaiseError> and C<PrintError> would use,
the DBI handle being used, and the first value being returned by
the method that failed (typically undef).
If the subroutine returns a false value then the C<RaiseError>
and/or C<PrintError> attributes are checked and acted upon as normal.
For example, to C<die> with a full stack trace for any error:
use Carp;
$h->{HandleError} = sub { confess(shift) };
Or to turn errors into exceptions:
use Exception; # or your own favourite exception module
$h->{HandleError} = sub { Exception->new('DBI')->raise($_[0]) };
It is possible to 'stack' multiple HandleError handlers by using
closures:
sub your_subroutine {
my $previous_handler = $h->{HandleError};
$h->{HandleError} = sub {
return 1 if $previous_handler and &$previous_handler(@_);
... your code here ...
};
}
Using a C<my> inside a subroutine to store the previous C<HandleError>
value is important. See L<perlsub> and L<perlref> for more information
about I<closures>.
It is possible for C<HandleError> to alter the error message that
will be used by C<RaiseError> and C<PrintError> if it returns false.
It can do that by altering the value of $_[0]. This example appends
a stack trace to all errors and, unlike the previous example using
Carp::confess, this will work C<PrintError> as well as C<RaiseError>:
$h->{HandleError} = sub { $_[0]=Carp::longmess($_[0]); 0; };
It is also possible for C<HandleError> to hide an error, to a limited
degree, by using L</set_err> to reset $DBI::err and $DBI::errstr,
and altering the return value of the failed method. For example:
$h->{HandleError} = sub {
return 0 unless $_[0] =~ /^\S+ fetchrow_arrayref failed:/;
return 0 unless $_[1]->err == 1234; # the error to 'hide'
$h->set_err(undef,undef); # turn off the error
$_[2] = [ ... ]; # supply alternative return value
return 1;
};
This only works for methods which return a single value and is hard
to make reliable (avoiding infinite loops, for example) and so isn't
recommended for general use! If you find a I<good> use for it then
please let me know.
=head3 C<HandleSetErr>
Type: code ref, inherited
The C<HandleSetErr> attribute can be used to intercept
the setting of handle C<err>, C<errstr>, and C<state> values.
If set to a reference to a subroutine then that subroutine is called
whenever set_err() is called, typically by the driver or a subclass.
The subroutine is called with five arguments, the first five that
were passed to set_err(): the handle, the C<err>, C<errstr>, and
C<state> values being set, and the method name. These can be altered
by changing the values in the @_ array. The return value affects
set_err() behaviour, see L</set_err> for details.
It is possible to 'stack' multiple HandleSetErr handlers by using
closures. See L</HandleError> for an example.
The C<HandleSetErr> and C<HandleError> subroutines differ in subtle
but significant ways. HandleError is only invoked at the point where
the DBI is about to return to the application with C<err> set true.
It's not invoked by the failure of a method that's been called by
another DBI method. HandleSetErr, on the other hand, is called
whenever set_err() is called with a defined C<err> value, even if false.
So it's not just for errors, despite the name, but also warn and info states.
The set_err() method, and thus HandleSetErr, may be called multiple
times within a method and is usually invoked from deep within driver code.
In theory a driver can use the return value from HandleSetErr via
set_err() to decide whether to continue or not. If set_err() returns
an empty list, indicating that the HandleSetErr code has 'handled'
the 'error', the driver could then continue instead of failing (if
that's a reasonable thing to do). This isn't excepted to be
common and any such cases should be clearly marked in the driver
documentation and discussed on the dbi-dev mailing list.
The C<HandleSetErr> attribute was added in DBI 1.41.
=head3 C<ErrCount>
Type: unsigned integer
The C<ErrCount> attribute is incremented whenever the set_err()
method records an error. It isn't incremented by warnings or
information states. It is not reset by the DBI at any time.
The C<ErrCount> attribute was added in DBI 1.41. Older drivers may
not have been updated to use set_err() to record errors and so this
attribute may not be incremented when using them.
=head3 C<ShowErrorStatement>
Type: boolean, inherited
The C<ShowErrorStatement> attribute can be used to cause the relevant
Statement text to be appended to the error messages generated by
the C<RaiseError>, C<PrintError>, and C<PrintWarn> attributes.
Only applies to errors on statement handles
plus the prepare(), do(), and the various C<select*()> database handle methods.
(The exact format of the appended text is subject to change.)
If C<$h-E<gt>{ParamValues}> returns a hash reference of parameter
(placeholder) values then those are formatted and appended to the
end of the Statement text in the error message.
=head3 C<TraceLevel>
Type: integer, inherited
The C<TraceLevel> attribute can be used as an alternative to the
L</trace> method to set the DBI trace level and trace flags for a
specific handle. See L</TRACING> for more details.
The C<TraceLevel> attribute is especially useful combined with
C<local> to alter the trace settings for just a single block of code.
=head3 C<FetchHashKeyName>
Type: string, inherited
The C<FetchHashKeyName> attribute is used to specify whether the fetchrow_hashref()
method should perform case conversion on the field names used for
the hash keys. For historical reasons it defaults to 'C<NAME>' but
it is recommended to set it to 'C<NAME_lc>' (convert to lower case)
or 'C<NAME_uc>' (convert to upper case) according to your preference.
It can only be set for driver and database handles. For statement
handles the value is frozen when prepare() is called.
=head3 C<ChopBlanks>
Type: boolean, inherited
The C<ChopBlanks> attribute can be used to control the trimming of trailing space
characters from fixed width character (CHAR) fields. No other field
types are affected, even where field values have trailing spaces.
The default is false (although it is possible that the default may change).
Applications that need specific behaviour should set the attribute as
needed.
Drivers are not required to support this attribute, but any driver which
does not support it must arrange to return C<undef> as the attribute value.
=head3 C<LongReadLen>
Type: unsigned integer, inherited
The C<LongReadLen> attribute may be used to control the maximum
length of 'long' type fields (LONG, BLOB, CLOB, MEMO, etc.) which the driver will
read from the database automatically when it fetches each row of data.
The C<LongReadLen> attribute only relates to fetching and reading
long values; it is not involved in inserting or updating them.
A value of 0 means not to automatically fetch any long data.
Drivers may return undef or an empty string for long fields when
C<LongReadLen> is 0.
The default is typically 0 (zero) or 80 bytes but may vary between drivers.
Applications fetching long fields should set this value to slightly
larger than the longest long field value to be fetched.
Some databases return some long types encoded as pairs of hex digits.
For these types, C<LongReadLen> relates to the underlying data
length and not the doubled-up length of the encoded string.
Changing the value of C<LongReadLen> for a statement handle after it
has been C<prepare>'d will typically have no effect, so it's common to
set C<LongReadLen> on the C<$dbh> before calling C<prepare>.
For most drivers the value used here has a direct effect on the
memory used by the statement handle while it's active, so don't be
too generous. If you can't be sure what value to use you could
execute an extra select statement to determine the longest value.
For example:
$dbh->{LongReadLen} = $dbh->selectrow_array(qq{
SELECT MAX(OCTET_LENGTH(long_column_name))
FROM table WHERE ...
});
$sth = $dbh->prepare(qq{
SELECT long_column_name, ... FROM table WHERE ...
});
You may need to take extra care if the table can be modified between
the first select and the second being executed. You may also need to
use a different function if OCTET_LENGTH() does not work for long
types in your database. For example, for Sybase use DATALENGTH() and
for Oracle use LENGTHB().
See also L</LongTruncOk> for information on truncation of long types.
=head3 C<LongTruncOk>
Type: boolean, inherited
The C<LongTruncOk> attribute may be used to control the effect of
fetching a long field value which has been truncated (typically
because it's longer than the value of the C<LongReadLen> attribute).
By default, C<LongTruncOk> is false and so fetching a long value that
needs to be truncated will cause the fetch to fail.
(Applications should always be sure to
check for errors after a fetch loop in case an error, such as a divide
by zero or long field truncation, caused the fetch to terminate
prematurely.)
If a fetch fails due to a long field truncation when C<LongTruncOk> is
false, many drivers will allow you to continue fetching further rows.
See also L</LongReadLen>.
=head3 C<TaintIn>
Type: boolean, inherited
If the C<TaintIn> attribute is set to a true value I<and> Perl is running in
taint mode (e.g., started with the C<-T> option), then all the arguments
to most DBI method calls are checked for being tainted. I<This may change.>
The attribute defaults to off, even if Perl is in taint mode.
See L<perlsec> for more about taint mode. If Perl is not
running in taint mode, this attribute has no effect.
When fetching data that you trust you can turn off the TaintIn attribute,
for that statement handle, for the duration of the fetch loop.
The C<TaintIn> attribute was added in DBI 1.31.
=head3 C<TaintOut>
Type: boolean, inherited
If the C<TaintOut> attribute is set to a true value I<and> Perl is running in
taint mode (e.g., started with the C<-T> option), then most data fetched
from the database is considered tainted. I<This may change.>
The attribute defaults to off, even if Perl is in taint mode.
See L<perlsec> for more about taint mode. If Perl is not
running in taint mode, this attribute has no effect.
When fetching data that you trust you can turn off the TaintOut attribute,
for that statement handle, for the duration of the fetch loop.
Currently only fetched data is tainted. It is possible that the results
of other DBI method calls, and the value of fetched attributes, may
also be tainted in future versions. That change may well break your
applications unless you take great care now. If you use DBI Taint mode,
please report your experience and any suggestions for changes.
The C<TaintOut> attribute was added in DBI 1.31.
=head3 C<Taint>
Type: boolean, inherited
The C<Taint> attribute is a shortcut for L</TaintIn> and L</TaintOut> (it is also present
for backwards compatibility).
Setting this attribute sets both L</TaintIn> and L</TaintOut>, and retrieving
it returns a true value if and only if L</TaintIn> and L</TaintOut> are
both set to true values.
=head3 C<Profile>
Type: inherited
The C<Profile> attribute enables the collection and reporting of
method call timing statistics. See the L<DBI::Profile> module
documentation for I<much> more detail.
The C<Profile> attribute was added in DBI 1.24.
=head3 C<ReadOnly>
Type: boolean, inherited
An application can set the C<ReadOnly> attribute of a handle to a true value to
indicate that it will not be attempting to make any changes using that handle
or any children of it.
Note that the exact definition of 'read only' is rather fuzzy.
For more details see the documentation for the driver you're using.
If the driver can make the handle truly read-only then it should
(unless doing so would have unpleasant side effect, like changing the
consistency level from per-statement to per-session).
Otherwise the attribute is simply advisory.
A driver can set the C<ReadOnly> attribute itself to indicate that the data it
is connected to cannot be changed for some reason.
If the driver cannot ensure the C<ReadOnly> attribute is adhered to it
will record a warning. In this case reading the C<ReadOnly> attribute
back after it is set true will return true even if the underlying
driver cannot ensure this (so any application knows the application
declared itself ReadOnly).
Library modules and proxy drivers can use the attribute to influence
their behavior. For example, the DBD::Gofer driver considers the
C<ReadOnly> attribute when making a decision about whether to retry an
operation that failed.
The attribute should be set to 1 or 0 (or undef). Other values are reserved.
=head3 C<Callbacks>
Type: hash ref
The DBI callback mechanism lets you intercept, and optionally replace, any
method call on a DBI handle. At the extreme, it lets you become a puppet
master, deceiving the application in any way you want.
The C<Callbacks> attribute is a hash reference where the keys are DBI method
names and the values are code references. For each key naming a method, the
DBI will execute the associated code reference before executing the method.
The arguments to the code reference will be the same as to the method,
including the invocant (a database handle or statement handle). For example,
say that to callback to some code on a call to C<prepare()>:
$dbh->{Callbacks} = {
prepare => sub {
my ($dbh, $query, $attrs) = @_;
print "Preparing q{$query}\n"
},
};
The callback would then be executed when you called the C<prepare()> method:
$dbh->prepare('SELECT 1');
And the output of course would be:
Preparing q{SELECT 1}
Because callbacks are executed I<before> the methods
they're associated with, you can modify the arguments before they're passed on
to the method call. For example, to make sure that all calls to C<prepare()>
are immediately prepared by L<DBD::Pg>, add a callback that makes sure that
the C<pg_prepare_now> attribute is always set:
my $dbh = DBI->connect($dsn, $username, $auth, {
Callbacks => {
prepare => sub {
$_[2] ||= {};
$_[2]->{pg_prepare_now} = 1;
return; # must return nothing
},
}
});
Note that we are editing the contents of C<@_> directly. In this case we've
created the attributes hash if it's not passed to the C<prepare> call.
You can also prevent the associated method from ever executing. While a
callback executes, C<$_> holds the method name. (This allows multiple callbacks
to share the same code reference and still know what method was called.)
To prevent the method from
executing, simply C<undef $_>. For example, if you wanted to disable calls to
C<ping()>, you could do this:
$dbh->{Callbacks} = {
ping => sub {
# tell dispatch to not call the method:
undef $_;
# return this value instead:
return "42 bells";
}
};
As with other attributes, Callbacks can be specified on a handle or via the
attributes to C<connect()>. Callbacks can also be applied to a statement
methods on a statement handle. For example:
$sth->{Callbacks} = {
execute => sub {
print "Executing ", shift->{Statement}, "\n";
}
};
The C<Callbacks> attribute of a database handle isn't copied to any statement
handles it creates. So setting callbacks for a statement handle requires you to
set the C<Callbacks> attribute on the statement handle yourself, as in the
example above, or use the special C<ChildCallbacks> key described below.
B<Special Keys in Callbacks Attribute>
In addition to DBI handle method names, the C<Callbacks> hash reference
supports four additional keys.
The first is the C<ChildCallbacks> key. When a statement handle is created from
a database handle the C<ChildCallbacks> key of the database handle's
C<Callbacks> attribute, if any, becomes the new C<Callbacks> attribute of the
statement handle.
This allows you to define callbacks for all statement handles created from a
database handle. For example, if you wanted to count how many times C<execute>
was called in your application, you could write:
my $exec_count = 0;
my $dbh = DBI->connect( $dsn, $username, $auth, {
Callbacks => {
ChildCallbacks => {
execute => sub { $exec_count++; return; }
}
}
});
END {
print "The execute method was called $exec_count times\n";
}
The other three special keys are C<connect_cached.new>,
C<connect_cached.connected>, and C<connect_cached.reused>. These keys define
callbacks that are called when C<connect_cached()> is called, but allow
different behaviors depending on whether a new handle is created or a handle
is returned. The callback is invoked with these arguments:
C<$dbh, $dsn, $user, $auth, $attr>.
For example, some applications uses C<connect_cached()> to connect with
C<AutoCommit> enabled and then disable C<AutoCommit> temporarily for
transactions. If C<connect_cached()> is called during a transaction, perhaps in
a utility method, then it might select the same cached handle and then force
C<AutoCommit> on, forcing a commit of the transaction. See the L</connect_cached>
documentation for one way to deal with that. Here we'll describe an alternative
approach using a callback.
Because the C<connect_cached.new> and C<connect_cached.reused> callbacks are
invoked before C<connect_cached()> has applied the connect attributes, you can
use them to edit the attributes that will be applied. To prevent a cached
handle from having its transactions committed before it's returned, you can
eliminate the C<AutoCommit> attribute in a C<connect_cached.reused> callback,
like so:
my $cb = {
'connect_cached.reused' => sub { delete $_[4]->{AutoCommit} },
};
sub dbh {
my $self = shift;
DBI->connect_cached( $dsn, $username, $auth, {
PrintError => 0,
RaiseError => 1,
AutoCommit => 1,
Callbacks => $cb,
});
}
The upshot is that new database handles are created with C<AutoCommit>
enabled, while cached database handles are left in whatever transaction state
they happened to be in when retrieved from the cache.
Note that we've also used a lexical for the callbacks hash reference. This is
because C<connect_cached()> returns a new database handle if any of the
attributes passed to is have changed. If we used an inline hash reference,
C<connect_cached()> would return a new database handle every time. Which would
rather defeat the purpose.
A more common application for callbacks is setting connection state only when
a new connection is made (by connect() or connect_cached()). Adding a callback
to the connected method (when using C<connect>) or via
C<connect_cached.connected> (when useing connect_cached()>) makes this easy.
The connected() method is a no-op by default (unless you subclass the DBI and
change it). The DBI calls it to indicate that a new connection has been made
and the connection attributes have all been set. You can give it a bit of
added functionality by applying a callback to it. For example, to make sure
that MySQL understands your application's ANSI-compliant SQL, set it up like
so:
my $dbh = DBI->connect($dsn, $username, $auth, {
Callbacks => {
connected => sub {
shift->do(q{
SET SESSION sql_mode='ansi,strict_trans_tables,no_auto_value_on_zero';
});
return;
},
}
});
If you're using C<connect_cached()>, use the C<connect_cached.connected>
callback, instead. This is because C<connected()> is called for both new and
reused database handles, but you want to execute a callback only the when a
new database handle is returned. For example, to set the time zone on
connection to a PostgreSQL database, try this:
my $cb = {
'connect_cached.connected' => sub {
shift->do('SET timezone = UTC');
}
};
sub dbh {
my $self = shift;
DBI->connect_cached( $dsn, $username, $auth, { Callbacks => $cb });
}
One significant limitation with callbacks is that there can only be one per
method per handle. This means it's easy for one use of callbacks to interfere
with, or typically simply overwrite, another use of callbacks. For this reason
modules using callbacks should document the fact clearly so application authors
can tell if use of callbacks by the module will clash with use of callbacks by
the application.
You might be able to work around this issue by taking a copy of the original
callback and calling it within your own. For example:
my $prev_cb = $h->{Callbacks}{method_name};
$h->{Callbacks}{method_name} = sub {
if ($prev_cb) {
my @result = $prev_cb->(@_);
return @result if not $_; # $prev_cb vetoed call
}
... your callback logic here ...
};
=head3 C<private_your_module_name_*>
The DBI provides a way to store extra information in a DBI handle as
"private" attributes. The DBI will allow you to store and retrieve any
attribute which has a name starting with "C<private_>".
It is I<strongly> recommended that you use just I<one> private
attribute (e.g., use a hash ref) I<and> give it a long and unambiguous
name that includes the module or application name that the attribute
relates to (e.g., "C<private_YourFullModuleName_thingy>").
Because of the way the Perl tie mechanism works you cannot reliably
use the C<||=> operator directly to initialise the attribute, like this:
my $foo = $dbh->{private_yourmodname_foo} ||= { ... }; # WRONG
you should use a two step approach like this:
my $foo = $dbh->{private_yourmodname_foo};
$foo ||= $dbh->{private_yourmodname_foo} = { ... };
This attribute is primarily of interest to people sub-classing DBI,
or for applications to piggy-back extra information onto DBI handles.
=head1 DBI DATABASE HANDLE OBJECTS
This section covers the methods and attributes associated with
database handles.
=head2 Database Handle Methods
The following methods are specified for DBI database handles:
=head3 C<clone>
$new_dbh = $dbh->clone(\%attr);
The C<clone> method duplicates the $dbh connection by connecting
with the same parameters ($dsn, $user, $password) as originally used.
The attributes for the cloned connect are the same as those used
for the I<original> connect, with any other attributes in C<\%attr>
merged over them. Effectively the same as doing:
%attributes_used = ( %original_attributes, %attr );
If \%attr is not given then it defaults to a hash containing all
the attributes in the attribute cache of $dbh excluding any non-code
references, plus the main boolean attributes (RaiseError, PrintError,
AutoCommit, etc.). I<This behaviour is unreliable and so use of clone without
an argument is deprecated and may cause a warning in a future release.>
The clone method can be used even if the database handle is disconnected.
The C<clone> method was added in DBI 1.33.
=head3 C<data_sources>
@ary = $dbh->data_sources();
@ary = $dbh->data_sources(\%attr);
Returns a list of data sources (databases) available via the $dbh
driver's data_sources() method, plus any extra data sources that
the driver can discover via the connected $dbh. Typically the extra
data sources are other databases managed by the same server process
that the $dbh is connected to.
Data sources are returned in a form suitable for passing to the
L</connect> method (that is, they will include the "C<dbi:$driver:>" prefix).
The data_sources() method, for a $dbh, was added in DBI 1.38.
=head3 C<do>
$rows = $dbh->do($statement) or die $dbh->errstr;
$rows = $dbh->do($statement, \%attr) or die $dbh->errstr;
$rows = $dbh->do($statement, \%attr, @bind_values) or die ...
Prepare and execute a single statement. Returns the number of rows
affected or C<undef> on error. A return value of C<-1> means the
number of rows is not known, not applicable, or not available.
This method is typically most useful for I<non>-C<SELECT> statements that
either cannot be prepared in advance (due to a limitation of the
driver) or do not need to be executed repeatedly. It should not
be used for C<SELECT> statements because it does not return a statement
handle (so you can't fetch any data).
The default C<do> method is logically similar to:
sub do {
my($dbh, $statement, $attr, @bind_values) = @_;
my $sth = $dbh->prepare($statement, $attr) or return undef;
$sth->execute(@bind_values) or return undef;
my $rows = $sth->rows;
($rows == 0) ? "0E0" : $rows; # always return true if no error
}
For example:
my $rows_deleted = $dbh->do(q{
DELETE FROM table
WHERE status = ?
}, undef, 'DONE') or die $dbh->errstr;
Using placeholders and C<@bind_values> with the C<do> method can be
useful because it avoids the need to correctly quote any variables
in the C<$statement>. But if you'll be executing the statement many
times then it's more efficient to C<prepare> it once and call
C<execute> many times instead.
The C<q{...}> style quoting used in this example avoids clashing with
quotes that may be used in the SQL statement. Use the double-quote-like
C<qq{...}> operator if you want to interpolate variables into the string.
See L<perlop/"Quote and Quote-like Operators"> for more details.
Note drivers are free to avoid the overhead of creating an DBI
statement handle for do(), especially if there are no parameters. In
this case error handlers, if invoked during do(), will be passed the
database handle.
=head3 C<last_insert_id>
$rv = $dbh->last_insert_id($catalog, $schema, $table, $field);
$rv = $dbh->last_insert_id($catalog, $schema, $table, $field, \%attr);
Returns a value 'identifying' the row just inserted, if possible.
Typically this would be a value assigned by the database server
to a column with an I<auto_increment> or I<serial> type.
Returns undef if the driver does not support the method or can't
determine the value.
The $catalog, $schema, $table, and $field parameters may be required
for some drivers (see below). If you don't know the parameter values
and your driver does not need them, then use C<undef> for each.
There are several caveats to be aware of with this method if you want
to use it for portable applications:
B<*> For some drivers the value may only available immediately after
the insert statement has executed (e.g., mysql, Informix).
B<*> For some drivers the $catalog, $schema, $table, and $field parameters
are required, for others they are ignored (e.g., mysql).
B<*> Drivers may return an indeterminate value if no insert has
been performed yet.
B<*> For some drivers the value may only be available if placeholders
have I<not> been used (e.g., Sybase, MS SQL). In this case the value
returned would be from the last non-placeholder insert statement.
B<*> Some drivers may need driver-specific hints about how to get
the value. For example, being told the name of the database 'sequence'
object that holds the value. Any such hints are passed as driver-specific
attributes in the \%attr parameter.
B<*> If the underlying database offers nothing better, then some
drivers may attempt to implement this method by executing
"C<select max($field) from $table>". Drivers using any approach
like this should issue a warning if C<AutoCommit> is true because
it is generally unsafe - another process may have modified the table
between your insert and the select. For situations where you know
it is safe, such as when you have locked the table, you can silence
the warning by passing C<Warn> => 0 in \%attr.
B<*> If no insert has been performed yet, or the last insert failed,
then the value is implementation defined.
Given all the caveats above, it's clear that this method must be
used with care.
The C<last_insert_id> method was added in DBI 1.38.
=head3 C<selectrow_array>
@row_ary = $dbh->selectrow_array($statement);
@row_ary = $dbh->selectrow_array($statement, \%attr);
@row_ary = $dbh->selectrow_array($statement, \%attr, @bind_values);
This utility method combines L</prepare>, L</execute> and
L</fetchrow_array> into a single call. If called in a list context, it
returns the first row of data from the statement. The C<$statement>
parameter can be a previously prepared statement handle, in which case
the C<prepare> is skipped.
If any method fails, and L</RaiseError> is not set, C<selectrow_array>
will return an empty list.
If called in a scalar context for a statement handle that has more
than one column, it is undefined whether the driver will return
the value of the first column or the last. So don't do that.
Also, in a scalar context, an C<undef> is returned if there are no
more rows or if an error occurred. That C<undef> can't be distinguished
from an C<undef> returned because the first field value was NULL.
For these reasons you should exercise some caution if you use
C<selectrow_array> in a scalar context, or just don't do that.
=head3 C<selectrow_arrayref>
$ary_ref = $dbh->selectrow_arrayref($statement);
$ary_ref = $dbh->selectrow_arrayref($statement, \%attr);
$ary_ref = $dbh->selectrow_arrayref($statement, \%attr, @bind_values);
This utility method combines L</prepare>, L</execute> and
L</fetchrow_arrayref> into a single call. It returns the first row of
data from the statement. The C<$statement> parameter can be a previously
prepared statement handle, in which case the C<prepare> is skipped.
If any method fails, and L</RaiseError> is not set, C<selectrow_arrayref>
will return undef.
=head3 C<selectrow_hashref>
$hash_ref = $dbh->selectrow_hashref($statement);
$hash_ref = $dbh->selectrow_hashref($statement, \%attr);
$hash_ref = $dbh->selectrow_hashref($statement, \%attr, @bind_values);
This utility method combines L</prepare>, L</execute> and
L</fetchrow_hashref> into a single call. It returns the first row of
data from the statement. The C<$statement> parameter can be a previously
prepared statement handle, in which case the C<prepare> is skipped.
If any method fails, and L</RaiseError> is not set, C<selectrow_hashref>
will return undef.
=head3 C<selectall_arrayref>
$ary_ref = $dbh->selectall_arrayref($statement);
$ary_ref = $dbh->selectall_arrayref($statement, \%attr);
$ary_ref = $dbh->selectall_arrayref($statement, \%attr, @bind_values);
This utility method combines L</prepare>, L</execute> and
L</fetchall_arrayref> into a single call. It returns a reference to an
array containing a reference to an array (or hash, see below) for each row of
data fetched.
The C<$statement> parameter can be a previously prepared statement handle,
in which case the C<prepare> is skipped. This is recommended if the
statement is going to be executed many times.
If L</RaiseError> is not set and any method except C<fetchall_arrayref>
fails then C<selectall_arrayref> will return C<undef>; if
C<fetchall_arrayref> fails then it will return with whatever data
has been fetched thus far. You should check C<$dbh-E<gt>err>
afterwards (or use the C<RaiseError> attribute) to discover if the data is
complete or was truncated due to an error.
The L</fetchall_arrayref> method called by C<selectall_arrayref>
supports a $max_rows parameter. You can specify a value for $max_rows
by including a 'C<MaxRows>' attribute in \%attr. In which case finish()
is called for you after fetchall_arrayref() returns.
The L</fetchall_arrayref> method called by C<selectall_arrayref>
also supports a $slice parameter. You can specify a value for $slice by
including a 'C<Slice>' or 'C<Columns>' attribute in \%attr. The only
difference between the two is that if C<Slice> is not defined and
C<Columns> is an array ref, then the array is assumed to contain column
index values (which count from 1), rather than perl array index values.
In which case the array is copied and each value decremented before
passing to C</fetchall_arrayref>.
You may often want to fetch an array of rows where each row is stored as a
hash. That can be done simply using:
my $emps = $dbh->selectall_arrayref(
"SELECT ename FROM emp ORDER BY ename",
{ Slice => {} }
);
foreach my $emp ( @$emps ) {
print "Employee: $emp->{ename}\n";
}
Or, to fetch into an array instead of an array ref:
@result = @{ $dbh->selectall_arrayref($sql, { Slice => {} }) };
See L</fetchall_arrayref> method for more details.
=head3 C<selectall_array>
@ary = $dbh->selectall_array($statement);
@ary = $dbh->selectall_array($statement, \%attr);
@ary = $dbh->selectall_array($statement, \%attr, @bind_values);
This is a convenience wrapper around L<selectall_arrayref> that returns
the rows directly as a list, rather than a reference to an array of rows.
Note that if L</RaiseError> is not set then you can't tell the difference
between returning no rows and an error. Using RaiseError is best practice.
=head3 C<selectall_hashref>
$hash_ref = $dbh->selectall_hashref($statement, $key_field);
$hash_ref = $dbh->selectall_hashref($statement, $key_field, \%attr);
$hash_ref = $dbh->selectall_hashref($statement, $key_field, \%attr, @bind_values);
This utility method combines L</prepare>, L</execute> and
L</fetchall_hashref> into a single call. It returns a reference to a
hash containing one entry, at most, for each row, as returned by fetchall_hashref().
The C<$statement> parameter can be a previously prepared statement handle,
in which case the C<prepare> is skipped. This is recommended if the
statement is going to be executed many times.
The C<$key_field> parameter defines which column, or columns, are used as keys
in the returned hash. It can either be the name of a single field, or a
reference to an array containing multiple field names. Using multiple names
yields a tree of nested hashes.
If a row has the same key as an earlier row then it replaces the earlier row.
If any method except C<fetchrow_hashref> fails, and L</RaiseError> is not set,
C<selectall_hashref> will return C<undef>. If C<fetchrow_hashref> fails and
L</RaiseError> is not set, then it will return with whatever data it
has fetched thus far. $DBI::err should be checked to catch that.
See fetchall_hashref() for more details.
=head3 C<selectcol_arrayref>
$ary_ref = $dbh->selectcol_arrayref($statement);
$ary_ref = $dbh->selectcol_arrayref($statement, \%attr);
$ary_ref = $dbh->selectcol_arrayref($statement, \%attr, @bind_values);
This utility method combines L</prepare>, L</execute>, and fetching one
column from all the rows, into a single call. It returns a reference to
an array containing the values of the first column from each row.
The C<$statement> parameter can be a previously prepared statement handle,
in which case the C<prepare> is skipped. This is recommended if the
statement is going to be executed many times.
If any method except C<fetch> fails, and L</RaiseError> is not set,
C<selectcol_arrayref> will return C<undef>. If C<fetch> fails and
L</RaiseError> is not set, then it will return with whatever data it
has fetched thus far. $DBI::err should be checked to catch that.
The C<selectcol_arrayref> method defaults to pushing a single column
value (the first) from each row into the result array. However, it can
also push another column, or even multiple columns per row, into the
result array. This behaviour can be specified via a 'C<Columns>'
attribute which must be a ref to an array containing the column number
or numbers to use. For example:
# get array of id and name pairs:
my $ary_ref = $dbh->selectcol_arrayref("select id, name from table", { Columns=>[1,2] });
my %hash = @$ary_ref; # build hash from key-value pairs so $hash{$id} => name
You can specify a maximum number of rows to fetch by including a
'C<MaxRows>' attribute in \%attr.
=head3 C<prepare>
$sth = $dbh->prepare($statement) or die $dbh->errstr;
$sth = $dbh->prepare($statement, \%attr) or die $dbh->errstr;
Prepares a statement for later execution by the database
engine and returns a reference to a statement handle object.
The returned statement handle can be used to get attributes of the
statement and invoke the L</execute> method. See L</Statement Handle Methods>.
Drivers for engines without the concept of preparing a
statement will typically just store the statement in the returned
handle and process it when C<$sth-E<gt>execute> is called. Such drivers are
unlikely to give much useful information about the
statement, such as C<$sth-E<gt>{NUM_OF_FIELDS}>, until after C<$sth-E<gt>execute>
has been called. Portable applications should take this into account.
In general, DBI drivers do not parse the contents of the statement
(other than simply counting any L<Placeholders|/Placeholders and Bind Values>).
The statement is
passed directly to the database engine, sometimes known as pass-thru
mode. This has advantages and disadvantages. On the plus side, you can
access all the functionality of the engine being used. On the downside,
you're limited if you're using a simple engine, and you need to take extra care if
writing applications intended to be portable between engines.
Portable applications should not assume that a new statement can be
prepared and/or executed while still fetching results from a previous
statement.
Some command-line SQL tools use statement terminators, like a semicolon,
to indicate the end of a statement. Such terminators should not normally
be used with the DBI.
=head3 C<prepare_cached>
$sth = $dbh->prepare_cached($statement)
$sth = $dbh->prepare_cached($statement, \%attr)
$sth = $dbh->prepare_cached($statement, \%attr, $if_active)
Like L</prepare> except that the statement handle returned will be
stored in a hash associated with the C<$dbh>. If another call is made to
C<prepare_cached> with the same C<$statement> and C<%attr> parameter values,
then the corresponding cached C<$sth> will be returned without contacting the
database server. Be sure to understand the cautions and caveats noted below.
The C<$if_active> parameter lets you adjust the behaviour if an
already cached statement handle is still Active. There are several
alternatives:
=over 4
=item B<0>: A warning will be generated, and finish() will be called on
the statement handle before it is returned. This is the default
behaviour if $if_active is not passed.
=item B<1>: finish() will be called on the statement handle, but the
warning is suppressed.
=item B<2>: Disables any checking.
=item B<3>: The existing active statement handle will be removed from the
cache and a new statement handle prepared and cached in its place.
This is the safest option because it doesn't affect the state of the
old handle, it just removes it from the cache. [Added in DBI 1.40]
=back
Here are some examples of C<prepare_cached>:
sub insert_hash {
my ($table, $field_values) = @_;
# sort to keep field order, and thus sql, stable for prepare_cached
my @fields = sort keys %$field_values;
my @values = @{$field_values}{@fields};
my $sql = sprintf "insert into %s (%s) values (%s)",
$table, join(",", @fields), join(",", ("?")x@fields);
my $sth = $dbh->prepare_cached($sql);
return $sth->execute(@values);
}
sub search_hash {
my ($table, $field_values) = @_;
# sort to keep field order, and thus sql, stable for prepare_cached
my @fields = sort keys %$field_values;
my @values = @{$field_values}{@fields};
my $qualifier = "";
$qualifier = "where ".join(" and ", map { "$_=?" } @fields) if @fields;
$sth = $dbh->prepare_cached("SELECT * FROM $table $qualifier");
return $dbh->selectall_arrayref($sth, {}, @values);
}
I<Caveat emptor:> This caching can be useful in some applications,
but it can also cause problems and should be used with care. Here
is a contrived case where caching would cause a significant problem:
my $sth = $dbh->prepare_cached('SELECT * FROM foo WHERE bar=?');
$sth->execute(...);
while (my $data = $sth->fetchrow_hashref) {
# later, in some other code called within the loop...
my $sth2 = $dbh->prepare_cached('SELECT * FROM foo WHERE bar=?');
$sth2->execute(...);
while (my $data2 = $sth2->fetchrow_arrayref) {
do_stuff(...);
}
}
In this example, since both handles are preparing the exact same statement,
C<$sth2> will not be its own statement handle, but a duplicate of C<$sth>
returned from the cache. The results will certainly not be what you expect.
Typically the inner fetch loop will work normally, fetching all
the records and terminating when there are no more, but now that $sth
is the same as $sth2 the outer fetch loop will also terminate.
You'll know if you run into this problem because prepare_cached()
will generate a warning by default (when $if_active is false).
The cache used by prepare_cached() is keyed by both the statement
and any attributes so you can also avoid this issue by doing something
like:
$sth = $dbh->prepare_cached("...", { dbi_dummy => __FILE__.__LINE__ });
which will ensure that prepare_cached only returns statements cached
by that line of code in that source file.
Also, to ensure the attributes passed are always the same, avoid passing
references inline. For example, the Slice attribute is specified as a
reference. Be sure to declare it external to the call to prepare_cached(), such
that a new hash reference is not created on every call. See L</connect_cached>
for more details and examples.
If you'd like the cache to managed intelligently, you can tie the
hashref returned by C<CachedKids> to an appropriate caching module,
such as L<Tie::Cache::LRU>:
my $cache;
tie %$cache, 'Tie::Cache::LRU', 500;
$dbh->{CachedKids} = $cache;
=head3 C<commit>
$rc = $dbh->commit or die $dbh->errstr;
Commit (make permanent) the most recent series of database changes
if the database supports transactions and AutoCommit is off.
If C<AutoCommit> is on, then calling
C<commit> will issue a "commit ineffective with AutoCommit" warning.
See also L</Transactions> in the L</FURTHER INFORMATION> section below.
=head3 C<rollback>
$rc = $dbh->rollback or die $dbh->errstr;
Rollback (undo) the most recent series of uncommitted database
changes if the database supports transactions and AutoCommit is off.
If C<AutoCommit> is on, then calling
C<rollback> will issue a "rollback ineffective with AutoCommit" warning.
See also L</Transactions> in the L</FURTHER INFORMATION> section below.
=head3 C<begin_work>
$rc = $dbh->begin_work or die $dbh->errstr;
Enable transactions (by turning C<AutoCommit> off) until the next call
to C<commit> or C<rollback>. After the next C<commit> or C<rollback>,
C<AutoCommit> will automatically be turned on again.
If C<AutoCommit> is already off when C<begin_work> is called then
it does nothing except return an error. If the driver does not support
transactions then when C<begin_work> attempts to set C<AutoCommit> off
the driver will trigger a fatal error.
See also L</Transactions> in the L</FURTHER INFORMATION> section below.
=head3 C<disconnect>
$rc = $dbh->disconnect or warn $dbh->errstr;
Disconnects the database from the database handle. C<disconnect> is typically only used
before exiting the program. The handle is of little use after disconnecting.
The transaction behaviour of the C<disconnect> method is, sadly,
undefined. Some database systems (such as Oracle and Ingres) will
automatically commit any outstanding changes, but others (such as
Informix) will rollback any outstanding changes. Applications not
using C<AutoCommit> should explicitly call C<commit> or C<rollback> before
calling C<disconnect>.
The database is automatically disconnected by the C<DESTROY> method if
still connected when there are no longer any references to the handle.
The C<DESTROY> method for each driver should implicitly call C<rollback> to
undo any uncommitted changes. This is vital behaviour to ensure that
incomplete transactions don't get committed simply because Perl calls
C<DESTROY> on every object before exiting. Also, do not rely on the order
of object destruction during "global destruction", as it is undefined.
Generally, if you want your changes to be committed or rolled back when
you disconnect, then you should explicitly call L</commit> or L</rollback>
before disconnecting.
If you disconnect from a database while you still have active
statement handles (e.g., SELECT statement handles that may have
more data to fetch), you will get a warning. The warning may indicate
that a fetch loop terminated early, perhaps due to an uncaught error.
To avoid the warning call the C<finish> method on the active handles.
=head3 C<ping>
$rc = $dbh->ping;
Attempts to determine, in a reasonably efficient way, if the database
server is still running and the connection to it is still working.
Individual drivers should implement this function in the most suitable
manner for their database engine.
The current I<default> implementation always returns true without
actually doing anything. Actually, it returns "C<0 but true>" which is
true but zero. That way you can tell if the return value is genuine or
just the default. Drivers should override this method with one that
does the right thing for their type of database.
Few applications would have direct use for this method. See the specialized
Apache::DBI module for one example usage.
=head3 C<get_info>
$value = $dbh->get_info( $info_type );
Returns information about the implementation, i.e. driver and data
source capabilities, restrictions etc. It returns C<undef> for
unknown or unimplemented information types. For example:
$database_version = $dbh->get_info( 18 ); # SQL_DBMS_VER
$max_select_tables = $dbh->get_info( 106 ); # SQL_MAXIMUM_TABLES_IN_SELECT
See L</"Standards Reference Information"> for more detailed information
about the information types and their meanings and possible return values.
The L<DBI::Const::GetInfoType> module exports a %GetInfoType hash that
can be used to map info type names to numbers. For example:
$database_version = $dbh->get_info( $GetInfoType{SQL_DBMS_VER} );
The names are a merging of the ANSI and ODBC standards (which differ
in some cases). See L<DBI::Const::GetInfoType> for more details.
Because some DBI methods make use of get_info(), drivers are strongly
encouraged to support I<at least> the following very minimal set
of information types to ensure the DBI itself works properly:
Type Name Example A Example B
---- -------------------------- ------------ ----------------
17 SQL_DBMS_NAME 'ACCESS' 'Oracle'
18 SQL_DBMS_VER '03.50.0000' '08.01.0721 ...'
29 SQL_IDENTIFIER_QUOTE_CHAR '`' '"'
41 SQL_CATALOG_NAME_SEPARATOR '.' '@'
114 SQL_CATALOG_LOCATION 1 2
Values from 9000 to 9999 for get_info are officially reserved for use by Perl DBI.
Values in that range which have been assigned a meaning are defined here:
C<9000>: true if a backslash character (C<\>) before placeholder-like text
(e.g. C<?>, C<:foo>) will prevent it being treated as a placeholder by the driver.
The backslash will be removed before the text is passed to the backend.
=head3 C<table_info>
$sth = $dbh->table_info( $catalog, $schema, $table, $type );
$sth = $dbh->table_info( $catalog, $schema, $table, $type, \%attr );
# then $sth->fetchall_arrayref or $sth->fetchall_hashref etc
Returns an active statement handle that can be used to fetch
information about tables and views that exist in the database.
The arguments $catalog, $schema and $table may accept search patterns
according to the database/driver, for example: $table = '%FOO%';
Remember that the underscore character ('C<_>') is a search pattern
that means match any character, so 'FOO_%' is the same as 'FOO%'
and 'FOO_BAR%' will match names like 'FOO1BAR'.
The value of $type is a comma-separated list of one or more types of
tables to be returned in the result set. Each value may optionally be
quoted, e.g.:
$type = "TABLE";
$type = "'TABLE','VIEW'";
In addition the following special cases may also be supported by some drivers:
=over 4
=item *
If the value of $catalog is '%' and $schema and $table name
are empty strings, the result set contains a list of catalog names.
For example:
$sth = $dbh->table_info('%', '', '');
=item *
If the value of $schema is '%' and $catalog and $table are empty
strings, the result set contains a list of schema names.
=item *
If the value of $type is '%' and $catalog, $schema, and $table are all
empty strings, the result set contains a list of table types.
=back
If your driver doesn't support one or more of the selection filter
parameters then you may get back more than you asked for and can
do the filtering yourself.
This method can be expensive, and can return a large amount of data.
(For example, small Oracle installation returns over 2000 rows.)
So it's a good idea to use the filters to limit the data as much as possible.
The statement handle returned has at least the following fields in the
order show below. Other fields, after these, may also be present.
B<TABLE_CAT>: Table catalog identifier. This field is NULL (C<undef>) if not
applicable to the data source, which is usually the case. This field
is empty if not applicable to the table.
B<TABLE_SCHEM>: The name of the schema containing the TABLE_NAME value.
This field is NULL (C<undef>) if not applicable to data source, and
empty if not applicable to the table.
B<TABLE_NAME>: Name of the table (or view, synonym, etc).
B<TABLE_TYPE>: One of the following: "TABLE", "VIEW", "SYSTEM TABLE",
"GLOBAL TEMPORARY", "LOCAL TEMPORARY", "ALIAS", "SYNONYM" or a type
identifier that is specific to the data
source.
B<REMARKS>: A description of the table. May be NULL (C<undef>).
Note that C<table_info> might not return records for all tables.
Applications can use any valid table regardless of whether it's
returned by C<table_info>.
See also L</tables>, L</"Catalog Methods"> and
L</"Standards Reference Information">.
=head3 C<column_info>
$sth = $dbh->column_info( $catalog, $schema, $table, $column );
# then $sth->fetchall_arrayref or $sth->fetchall_hashref etc
Returns an active statement handle that can be used to fetch
information about columns in specified tables.
The arguments $schema, $table and $column may accept search patterns
according to the database/driver, for example: $table = '%FOO%';
Note: The support for the selection criteria is driver specific. If the
driver doesn't support one or more of them then you may get back more
than you asked for and can do the filtering yourself.
Note: If your driver does not support column_info an undef is
returned. This is distinct from asking for something which does not
exist in a driver which supports column_info as a valid statement
handle to an empty result-set will be returned in this case.
If the arguments don't match any tables then you'll still get a statement
handle, it'll just return no rows.
The statement handle returned has at least the following fields in the
order shown below. Other fields, after these, may also be present.
B<TABLE_CAT>: The catalog identifier.
This field is NULL (C<undef>) if not applicable to the data source,
which is often the case. This field is empty if not applicable to the
table.
B<TABLE_SCHEM>: The schema identifier.
This field is NULL (C<undef>) if not applicable to the data source,
and empty if not applicable to the table.
B<TABLE_NAME>: The table identifier.
Note: A driver may provide column metadata not only for base tables, but
also for derived objects like SYNONYMS etc.
B<COLUMN_NAME>: The column identifier.
B<DATA_TYPE>: The concise data type code.
B<TYPE_NAME>: A data source dependent data type name.
B<COLUMN_SIZE>: The column size.
This is the maximum length in characters for character data types,
the number of digits or bits for numeric data types or the length
in the representation of temporal types.
See the relevant specifications for detailed information.
B<BUFFER_LENGTH>: The length in bytes of transferred data.
B<DECIMAL_DIGITS>: The total number of significant digits to the right of
the decimal point.
B<NUM_PREC_RADIX>: The radix for numeric precision.
The value is 10 or 2 for numeric data types and NULL (C<undef>) if not
applicable.
B<NULLABLE>: Indicates if a column can accept NULLs.
The following values are defined:
SQL_NO_NULLS 0
SQL_NULLABLE 1
SQL_NULLABLE_UNKNOWN 2
B<REMARKS>: A description of the column.
B<COLUMN_DEF>: The default value of the column, in a format that can be used
directly in an SQL statement.
Note that this may be an expression and not simply the text used for the
default value in the original CREATE TABLE statement. For example, given:
col1 char(30) default current_user -- a 'function'
col2 char(30) default 'string' -- a string literal
where "current_user" is the name of a function, the corresponding C<COLUMN_DEF>
values would be:
Database col1 col2
-------- ---- ----
Oracle: current_user 'string'
Postgres: "current_user"() 'string'::text
MS SQL: (user_name()) ('string')
B<SQL_DATA_TYPE>: The SQL data type.
B<SQL_DATETIME_SUB>: The subtype code for datetime and interval data types.
B<CHAR_OCTET_LENGTH>: The maximum length in bytes of a character or binary
data type column.
B<ORDINAL_POSITION>: The column sequence number (starting with 1).
B<IS_NULLABLE>: Indicates if the column can accept NULLs.
Possible values are: 'NO', 'YES' and ''.
SQL/CLI defines the following additional columns:
CHAR_SET_CAT
CHAR_SET_SCHEM
CHAR_SET_NAME
COLLATION_CAT
COLLATION_SCHEM
COLLATION_NAME
UDT_CAT
UDT_SCHEM
UDT_NAME
DOMAIN_CAT
DOMAIN_SCHEM
DOMAIN_NAME
SCOPE_CAT
SCOPE_SCHEM
SCOPE_NAME
MAX_CARDINALITY
DTD_IDENTIFIER
IS_SELF_REF
Drivers capable of supplying any of those values should do so in
the corresponding column and supply undef values for the others.
Drivers wishing to provide extra database/driver specific information
should do so in extra columns beyond all those listed above, and
use lowercase field names with the driver-specific prefix (i.e.,
'ora_...'). Applications accessing such fields should do so by name
and not by column number.
The result set is ordered by TABLE_CAT, TABLE_SCHEM, TABLE_NAME
and ORDINAL_POSITION.
Note: There is some overlap with statement handle attributes (in perl) and
SQLDescribeCol (in ODBC). However, SQLColumns provides more metadata.
See also L</"Catalog Methods"> and L</"Standards Reference Information">.
=head3 C<primary_key_info>
$sth = $dbh->primary_key_info( $catalog, $schema, $table );
# then $sth->fetchall_arrayref or $sth->fetchall_hashref etc
Returns an active statement handle that can be used to fetch information
about columns that make up the primary key for a table.
The arguments don't accept search patterns (unlike table_info()).
The statement handle will return one row per column, ordered by
TABLE_CAT, TABLE_SCHEM, TABLE_NAME, and KEY_SEQ.
If there is no primary key then the statement handle will fetch no rows.
Note: The support for the selection criteria, such as $catalog, is
driver specific. If the driver doesn't support catalogs and/or
schemas, it may ignore these criteria.
The statement handle returned has at least the following fields in the
order shown below. Other fields, after these, may also be present.
B<TABLE_CAT>: The catalog identifier.
This field is NULL (C<undef>) if not applicable to the data source,
which is often the case. This field is empty if not applicable to the
table.
B<TABLE_SCHEM>: The schema identifier.
This field is NULL (C<undef>) if not applicable to the data source,
and empty if not applicable to the table.
B<TABLE_NAME>: The table identifier.
B<COLUMN_NAME>: The column identifier.
B<KEY_SEQ>: The column sequence number (starting with 1).
Note: This field is named B<ORDINAL_POSITION> in SQL/CLI.
B<PK_NAME>: The primary key constraint identifier.
This field is NULL (C<undef>) if not applicable to the data source.
See also L</"Catalog Methods"> and L</"Standards Reference Information">.
=head3 C<primary_key>
@key_column_names = $dbh->primary_key( $catalog, $schema, $table );
Simple interface to the primary_key_info() method. Returns a list of
the column names that comprise the primary key of the specified table.
The list is in primary key column sequence order.
If there is no primary key then an empty list is returned.
=head3 C<foreign_key_info>
$sth = $dbh->foreign_key_info( $pk_catalog, $pk_schema, $pk_table
, $fk_catalog, $fk_schema, $fk_table );
$sth = $dbh->foreign_key_info( $pk_catalog, $pk_schema, $pk_table
, $fk_catalog, $fk_schema, $fk_table
, \%attr );
# then $sth->fetchall_arrayref or $sth->fetchall_hashref etc
Returns an active statement handle that can be used to fetch information
about foreign keys in and/or referencing the specified table(s).
The arguments don't accept search patterns (unlike table_info()).
C<$pk_catalog>, C<$pk_schema>, C<$pk_table>
identify the primary (unique) key table (B<PKT>).
C<$fk_catalog>, C<$fk_schema>, C<$fk_table>
identify the foreign key table (B<FKT>).
If both B<PKT> and B<FKT> are given, the function returns the foreign key, if
any, in table B<FKT> that refers to the primary (unique) key of table B<PKT>.
(Note: In SQL/CLI, the result is implementation-defined.)
If only B<PKT> is given, then the result set contains the primary key
of that table and all foreign keys that refer to it.
If only B<FKT> is given, then the result set contains all foreign keys
in that table and the primary keys to which they refer.
(Note: In SQL/CLI, the result includes unique keys too.)
For example:
$sth = $dbh->foreign_key_info( undef, $user, 'master');
$sth = $dbh->foreign_key_info( undef, undef, undef , undef, $user, 'detail');
$sth = $dbh->foreign_key_info( undef, $user, 'master', undef, $user, 'detail');
# then $sth->fetchall_arrayref or $sth->fetchall_hashref etc
Note: The support for the selection criteria, such as C<$catalog>, is
driver specific. If the driver doesn't support catalogs and/or
schemas, it may ignore these criteria.
The statement handle returned has the following fields in the order shown below.
Because ODBC never includes unique keys, they define different columns in the
result set than SQL/CLI. SQL/CLI column names are shown in parentheses.
B<PKTABLE_CAT ( UK_TABLE_CAT )>:
The primary (unique) key table catalog identifier.
This field is NULL (C<undef>) if not applicable to the data source,
which is often the case. This field is empty if not applicable to the
table.
B<PKTABLE_SCHEM ( UK_TABLE_SCHEM )>:
The primary (unique) key table schema identifier.
This field is NULL (C<undef>) if not applicable to the data source,
and empty if not applicable to the table.
B<PKTABLE_NAME ( UK_TABLE_NAME )>:
The primary (unique) key table identifier.
B<PKCOLUMN_NAME (UK_COLUMN_NAME )>:
The primary (unique) key column identifier.
B<FKTABLE_CAT ( FK_TABLE_CAT )>:
The foreign key table catalog identifier.
This field is NULL (C<undef>) if not applicable to the data source,
which is often the case. This field is empty if not applicable to the
table.
B<FKTABLE_SCHEM ( FK_TABLE_SCHEM )>:
The foreign key table schema identifier.
This field is NULL (C<undef>) if not applicable to the data source,
and empty if not applicable to the table.
B<FKTABLE_NAME ( FK_TABLE_NAME )>:
The foreign key table identifier.
B<FKCOLUMN_NAME ( FK_COLUMN_NAME )>:
The foreign key column identifier.
B<KEY_SEQ ( ORDINAL_POSITION )>:
The column sequence number (starting with 1).
B<UPDATE_RULE ( UPDATE_RULE )>:
The referential action for the UPDATE rule.
The following codes are defined:
CASCADE 0
RESTRICT 1
SET NULL 2
NO ACTION 3
SET DEFAULT 4
B<DELETE_RULE ( DELETE_RULE )>:
The referential action for the DELETE rule.
The codes are the same as for UPDATE_RULE.
B<FK_NAME ( FK_NAME )>:
The foreign key name.
B<PK_NAME ( UK_NAME )>:
The primary (unique) key name.
B<DEFERRABILITY ( DEFERABILITY )>:
The deferrability of the foreign key constraint.
The following codes are defined:
INITIALLY DEFERRED 5
INITIALLY IMMEDIATE 6
NOT DEFERRABLE 7
B< ( UNIQUE_OR_PRIMARY )>:
This column is necessary if a driver includes all candidate (i.e. primary and
alternate) keys in the result set (as specified by SQL/CLI).
The value of this column is UNIQUE if the foreign key references an alternate
key and PRIMARY if the foreign key references a primary key, or it
may be undefined if the driver doesn't have access to the information.
See also L</"Catalog Methods"> and L</"Standards Reference Information">.
=head3 C<statistics_info>
B<Warning:> This method is experimental and may change.
$sth = $dbh->statistics_info( $catalog, $schema, $table, $unique_only, $quick );
# then $sth->fetchall_arrayref or $sth->fetchall_hashref etc
Returns an active statement handle that can be used to fetch statistical
information about a table and its indexes.
The arguments don't accept search patterns (unlike L</table_info>).
If the boolean argument $unique_only is true, only UNIQUE indexes will be
returned in the result set, otherwise all indexes will be returned.
If the boolean argument $quick is set, the actual statistical information
columns (CARDINALITY and PAGES) will only be returned if they are readily
available from the server, and might not be current. Some databases may
return stale statistics or no statistics at all with this flag set.
The statement handle will return at most one row per column name per index,
plus at most one row for the entire table itself, ordered by NON_UNIQUE, TYPE,
INDEX_QUALIFIER, INDEX_NAME, and ORDINAL_POSITION.
Note: The support for the selection criteria, such as $catalog, is
driver specific. If the driver doesn't support catalogs and/or
schemas, it may ignore these criteria.
The statement handle returned has at least the following fields in the
order shown below. Other fields, after these, may also be present.
B<TABLE_CAT>: The catalog identifier.
This field is NULL (C<undef>) if not applicable to the data source,
which is often the case. This field is empty if not applicable to the
table.
B<TABLE_SCHEM>: The schema identifier.
This field is NULL (C<undef>) if not applicable to the data source,
and empty if not applicable to the table.
B<TABLE_NAME>: The table identifier.
B<NON_UNIQUE>: Unique index indicator.
Returns 0 for unique indexes, 1 for non-unique indexes
B<INDEX_QUALIFIER>: Index qualifier identifier.
The identifier that is used to qualify the index name when doing a
C<DROP INDEX>; NULL (C<undef>) is returned if an index qualifier is not
supported by the data source.
If a non-NULL (defined) value is returned in this column, it must be used
to qualify the index name on a C<DROP INDEX> statement; otherwise,
the TABLE_SCHEM should be used to qualify the index name.
B<INDEX_NAME>: The index identifier.
B<TYPE>: The type of information being returned. Can be any of the
following values: 'table', 'btree', 'clustered', 'content', 'hashed',
or 'other'.
In the case that this field is 'table', all fields
other than TABLE_CAT, TABLE_SCHEM, TABLE_NAME, TYPE,
CARDINALITY, and PAGES will be NULL (C<undef>).
B<ORDINAL_POSITION>: Column sequence number (starting with 1).
B<COLUMN_NAME>: The column identifier.
B<ASC_OR_DESC>: Column sort sequence.
C<A> for Ascending, C<D> for Descending, or NULL (C<undef>) if
not supported for this index.
B<CARDINALITY>: Cardinality of the table or index.
For indexes, this is the number of unique values in the index.
For tables, this is the number of rows in the table.
If not supported, the value will be NULL (C<undef>).
B<PAGES>: Number of storage pages used by this table or index.
If not supported, the value will be NULL (C<undef>).
B<FILTER_CONDITION>: The index filter condition as a string.
If the index is not a filtered index, or it cannot be determined
whether the index is a filtered index, this value is NULL (C<undef>).
If the index is a filtered index, but the filter condition
cannot be determined, this value is the empty string C<''>.
Otherwise it will be the literal filter condition as a string,
such as C<SALARY <= 4500>.
See also L</"Catalog Methods"> and L</"Standards Reference Information">.
=head3 C<tables>
@names = $dbh->tables( $catalog, $schema, $table, $type );
@names = $dbh->tables; # deprecated
Simple interface to table_info(). Returns a list of matching
table names, possibly including a catalog/schema prefix.
See L</table_info> for a description of the parameters.
If C<$dbh-E<gt>get_info(29)> returns true (29 is SQL_IDENTIFIER_QUOTE_CHAR)
then the table names are constructed and quoted by L</quote_identifier>
to ensure they are usable even if they contain whitespace or reserved
words etc. This means that the table names returned will include
quote characters.
=head3 C<type_info_all>
$type_info_all = $dbh->type_info_all;
Returns a reference to an array which holds information about each data
type variant supported by the database and driver. The array and its
contents should be treated as read-only.
The first item is a reference to an 'index' hash of C<Name =>E<gt> C<Index> pairs.
The items following that are references to arrays, one per supported data
type variant. The leading index hash defines the names and order of the
fields within the arrays that follow it.
For example:
$type_info_all = [
{ TYPE_NAME => 0,
DATA_TYPE => 1,
COLUMN_SIZE => 2, # was PRECISION originally
LITERAL_PREFIX => 3,
LITERAL_SUFFIX => 4,
CREATE_PARAMS => 5,
NULLABLE => 6,
CASE_SENSITIVE => 7,
SEARCHABLE => 8,
UNSIGNED_ATTRIBUTE=> 9,
FIXED_PREC_SCALE => 10, # was MONEY originally
AUTO_UNIQUE_VALUE => 11, # was AUTO_INCREMENT originally
LOCAL_TYPE_NAME => 12,
MINIMUM_SCALE => 13,
MAXIMUM_SCALE => 14,
SQL_DATA_TYPE => 15,
SQL_DATETIME_SUB => 16,
NUM_PREC_RADIX => 17,
INTERVAL_PRECISION=> 18,
},
[ 'VARCHAR', SQL_VARCHAR,
undef, "'","'", undef,0, 1,1,0,0,0,undef,1,255, undef
],
[ 'INTEGER', SQL_INTEGER,
undef, "", "", undef,0, 0,1,0,0,0,undef,0, 0, 10
],
];
More than one row may have the same value in the C<DATA_TYPE>
field if there are different ways to spell the type name and/or there
are variants of the type with different attributes (e.g., with and
without C<AUTO_UNIQUE_VALUE> set, with and without C<UNSIGNED_ATTRIBUTE>, etc).
The rows are ordered by C<DATA_TYPE> first and then by how closely each
type maps to the corresponding ODBC SQL data type, closest first.
The meaning of the fields is described in the documentation for
the L</type_info> method.
An 'index' hash is provided so you don't need to rely on index
values defined above. However, using DBD::ODBC with some old ODBC
drivers may return older names, shown as comments in the example above.
Another issue with the index hash is that the lettercase of the
keys is not defined. It is usually uppercase, as show here, but
drivers may return names with any lettercase.
Drivers are also free to return extra driver-specific columns of
information - though it's recommended that they start at column
index 50 to leave room for expansion of the DBI/ODBC specification.
The type_info_all() method is not normally used directly.
The L</type_info> method provides a more usable and useful interface
to the data.
=head3 C<type_info>
@type_info = $dbh->type_info($data_type);
Returns a list of hash references holding information about one or more
variants of $data_type. The list is ordered by C<DATA_TYPE> first and
then by how closely each type maps to the corresponding ODBC SQL data
type, closest first. If called in a scalar context then only the first
(best) element is returned.
If $data_type is undefined or C<SQL_ALL_TYPES>, then the list will
contain hashes for all data type variants supported by the database and driver.
If $data_type is an array reference then C<type_info> returns the
information for the I<first> type in the array that has any matches.
The keys of the hash follow the same letter case conventions as the
rest of the DBI (see L</Naming Conventions and Name Space>). The
following uppercase items should always exist, though may be undef:
=over 4
=item TYPE_NAME (string)
Data type name for use in CREATE TABLE statements etc.
=item DATA_TYPE (integer)
SQL data type number.
=item COLUMN_SIZE (integer)
For numeric types, this is either the total number of digits (if the
NUM_PREC_RADIX value is 10) or the total number of bits allowed in the
column (if NUM_PREC_RADIX is 2).
For string types, this is the maximum size of the string in characters.
For date and interval types, this is the maximum number of characters
needed to display the value.
=item LITERAL_PREFIX (string)
Characters used to prefix a literal. A typical prefix is "C<'>" for characters,
or possibly "C<0x>" for binary values passed as hexadecimal. NULL (C<undef>) is
returned for data types for which this is not applicable.
=item LITERAL_SUFFIX (string)
Characters used to suffix a literal. Typically "C<'>" for characters.
NULL (C<undef>) is returned for data types where this is not applicable.
=item CREATE_PARAMS (string)
Parameter names for data type definition. For example, C<CREATE_PARAMS> for a
C<DECIMAL> would be "C<precision,scale>" if the DECIMAL type should be
declared as C<DECIMAL(>I<precision,scale>C<)> where I<precision> and I<scale>
are integer values. For a C<VARCHAR> it would be "C<max length>".
NULL (C<undef>) is returned for data types for which this is not applicable.
=item NULLABLE (integer)
Indicates whether the data type accepts a NULL value:
C<0> or an empty string = no, C<1> = yes, C<2> = unknown.
=item CASE_SENSITIVE (boolean)
Indicates whether the data type is case sensitive in collations and
comparisons.
=item SEARCHABLE (integer)
Indicates how the data type can be used in a WHERE clause, as
follows:
0 - Cannot be used in a WHERE clause
1 - Only with a LIKE predicate
2 - All comparison operators except LIKE
3 - Can be used in a WHERE clause with any comparison operator
=item UNSIGNED_ATTRIBUTE (boolean)
Indicates whether the data type is unsigned. NULL (C<undef>) is returned
for data types for which this is not applicable.
=item FIXED_PREC_SCALE (boolean)
Indicates whether the data type always has the same precision and scale
(such as a money type). NULL (C<undef>) is returned for data types
for which
this is not applicable.
=item AUTO_UNIQUE_VALUE (boolean)
Indicates whether a column of this data type is automatically set to a
unique value whenever a new row is inserted. NULL (C<undef>) is returned
for data types for which this is not applicable.
=item LOCAL_TYPE_NAME (string)
Localized version of the C<TYPE_NAME> for use in dialog with users.
NULL (C<undef>) is returned if a localized name is not available (in which
case C<TYPE_NAME> should be used).
=item MINIMUM_SCALE (integer)
The minimum scale of the data type. If a data type has a fixed scale,
then C<MAXIMUM_SCALE> holds the same value. NULL (C<undef>) is returned for
data types for which this is not applicable.
=item MAXIMUM_SCALE (integer)
The maximum scale of the data type. If a data type has a fixed scale,
then C<MINIMUM_SCALE> holds the same value. NULL (C<undef>) is returned for
data types for which this is not applicable.
=item SQL_DATA_TYPE (integer)
This column is the same as the C<DATA_TYPE> column, except for interval
and datetime data types. For interval and datetime data types, the
C<SQL_DATA_TYPE> field will return C<SQL_INTERVAL> or C<SQL_DATETIME>, and the
C<SQL_DATETIME_SUB> field below will return the subcode for the specific
interval or datetime data type. If this field is NULL, then the driver
does not support or report on interval or datetime subtypes.
=item SQL_DATETIME_SUB (integer)
For interval or datetime data types, where the C<SQL_DATA_TYPE>
field above is C<SQL_INTERVAL> or C<SQL_DATETIME>, this field will
hold the I<subcode> for the specific interval or datetime data type.
Otherwise it will be NULL (C<undef>).
Although not mentioned explicitly in the standards, it seems there
is a simple relationship between these values:
DATA_TYPE == (10 * SQL_DATA_TYPE) + SQL_DATETIME_SUB
=item NUM_PREC_RADIX (integer)
The radix value of the data type. For approximate numeric types,
C<NUM_PREC_RADIX>
contains the value 2 and C<COLUMN_SIZE> holds the number of bits. For
exact numeric types, C<NUM_PREC_RADIX> contains the value 10 and C<COLUMN_SIZE> holds
the number of decimal digits. NULL (C<undef>) is returned either for data types
for which this is not applicable or if the driver cannot report this information.
=item INTERVAL_PRECISION (integer)
The interval leading precision for interval types. NULL is returned
either for data types for which this is not applicable or if the driver
cannot report this information.
=back
For example, to find the type name for the fields in a select statement
you can do:
@names = map { scalar $dbh->type_info($_)->{TYPE_NAME} } @{ $sth->{TYPE} }
Since DBI and ODBC drivers vary in how they map their types into the
ISO standard types you may need to search for more than one type.
Here's an example looking for a usable type to store a date:
$my_date_type = $dbh->type_info( [ SQL_DATE, SQL_TIMESTAMP ] );
Similarly, to more reliably find a type to store small integers, you could
use a list starting with C<SQL_SMALLINT>, C<SQL_INTEGER>, C<SQL_DECIMAL>, etc.
See also L</"Standards Reference Information">.
=head3 C<quote>
$sql = $dbh->quote($value);
$sql = $dbh->quote($value, $data_type);
Quote a string literal for use as a literal value in an SQL statement,
by escaping any special characters (such as quotation marks)
contained within the string and adding the required type of outer
quotation marks.
$sql = sprintf "SELECT foo FROM bar WHERE baz = %s",
$dbh->quote("Don't");
For most database types, at least those that conform to SQL standards, quote
would return C<'Don''t'> (including the outer quotation marks). For others it
may return something like C<'Don\'t'>
An undefined C<$value> value will be returned as the string C<NULL> (without
single quotation marks) to match how NULLs are represented in SQL.
If C<$data_type> is supplied, it is used to try to determine the required
quoting behaviour by using the information returned by L</type_info>.
As a special case, the standard numeric types are optimized to return
C<$value> without calling C<type_info>.
Quote will probably I<not> be able to deal with all possible input
(such as binary data or data containing newlines), and is not related in
any way with escaping or quoting shell meta-characters.
It is valid for the quote() method to return an SQL expression that
evaluates to the desired string. For example:
$quoted = $dbh->quote("one\ntwo\0three")
may return something like:
CONCAT('one', CHAR(12), 'two', CHAR(0), 'three')
The quote() method should I<not> be used with L</"Placeholders and
Bind Values">.
=head3 C<quote_identifier>
$sql = $dbh->quote_identifier( $name );
$sql = $dbh->quote_identifier( $catalog, $schema, $table, \%attr );
Quote an identifier (table name etc.) for use in an SQL statement,
by escaping any special characters (such as double quotation marks)
it contains and adding the required type of outer quotation marks.
Undefined names are ignored and the remainder are quoted and then
joined together, typically with a dot (C<.>) character. For example:
$id = $dbh->quote_identifier( undef, 'Her schema', 'My table' );
would, for most database types, return C<"Her schema"."My table">
(including all the double quotation marks).
If three names are supplied then the first is assumed to be a
catalog name and special rules may be applied based on what L</get_info>
returns for SQL_CATALOG_NAME_SEPARATOR (41) and SQL_CATALOG_LOCATION (114).
For example, for Oracle:
$id = $dbh->quote_identifier( 'link', 'schema', 'table' );
would return C<"schema"."table"@"link">.
=head3 C<take_imp_data>
$imp_data = $dbh->take_imp_data;
Leaves the $dbh in an almost dead, zombie-like, state and returns
a binary string of raw implementation data from the driver which
describes the current database connection. Effectively it detaches
the underlying database API connection data from the DBI handle.
After calling take_imp_data(), all other methods except C<DESTROY>
will generate a warning and return undef.
Why would you want to do this? You don't, forget I even mentioned it.
Unless, that is, you're implementing something advanced like a
multi-threaded connection pool. See L<DBI::Pool>.
The returned $imp_data can be passed as a C<dbi_imp_data> attribute
to a later connect() call, even in a separate thread in the same
process, where the driver can use it to 'adopt' the existing
connection that the implementation data was taken from.
Some things to keep in mind...
B<*> the $imp_data holds the only reference to the underlying
database API connection data. That connection is still 'live' and
won't be cleaned up properly unless the $imp_data is used to create
a new $dbh which is then allowed to disconnect() normally.
B<*> using the same $imp_data to create more than one other new
$dbh at a time may well lead to unpleasant problems. Don't do that.
Any child statement handles are effectively destroyed when take_imp_data() is
called.
The C<take_imp_data> method was added in DBI 1.36 but wasn't useful till 1.49.
=head2 Database Handle Attributes
This section describes attributes specific to database handles.
Changes to these database handle attributes do not affect any other
existing or future database handles.
Attempting to set or get the value of an unknown attribute generates a warning,
except for private driver-specific attributes (which all have names
starting with a lowercase letter).
Example:
$h->{AutoCommit} = ...; # set/write
... = $h->{AutoCommit}; # get/read
=head3 C<AutoCommit>
Type: boolean
If true, then database changes cannot be rolled-back (undone). If false,
then database changes automatically occur within a "transaction", which
must either be committed or rolled back using the C<commit> or C<rollback>
methods.
Drivers should always default to C<AutoCommit> mode (an unfortunate
choice largely forced on the DBI by ODBC and JDBC conventions.)
Attempting to set C<AutoCommit> to an unsupported value is a fatal error.
This is an important feature of the DBI. Applications that need
full transaction behaviour can set C<$dbh-E<gt>{AutoCommit} = 0> (or
set C<AutoCommit> to 0 via L</connect>)
without having to check that the value was assigned successfully.
For the purposes of this description, we can divide databases into three
categories:
Databases which don't support transactions at all.
Databases in which a transaction is always active.
Databases in which a transaction must be explicitly started (C<'BEGIN WORK'>).
B<* Databases which don't support transactions at all>
For these databases, attempting to turn C<AutoCommit> off is a fatal error.
C<commit> and C<rollback> both issue warnings about being ineffective while
C<AutoCommit> is in effect.
B<* Databases in which a transaction is always active>
These are typically mainstream commercial relational databases with
"ANSI standard" transaction behaviour.
If C<AutoCommit> is off, then changes to the database won't have any
lasting effect unless L</commit> is called (but see also
L</disconnect>). If L</rollback> is called then any changes since the
last commit are undone.
If C<AutoCommit> is on, then the effect is the same as if the DBI
called C<commit> automatically after every successful database
operation. So calling C<commit> or C<rollback> explicitly while
C<AutoCommit> is on would be ineffective because the changes would
have already been committed.
Changing C<AutoCommit> from off to on will trigger a L</commit>.
For databases which don't support a specific auto-commit mode, the
driver has to commit each statement automatically using an explicit
C<COMMIT> after it completes successfully (and roll it back using an
explicit C<ROLLBACK> if it fails). The error information reported to the
application will correspond to the statement which was executed, unless
it succeeded and the commit or rollback failed.
B<* Databases in which a transaction must be explicitly started>
For these databases, the intention is to have them act like databases in
which a transaction is always active (as described above).
To do this, the driver will automatically begin an explicit transaction
when C<AutoCommit> is turned off, or after a L</commit> or
L</rollback> (or when the application issues the next database
operation after one of those events).
In this way, the application does not have to treat these databases
as a special case.
See L</commit>, L</disconnect> and L</Transactions> for other important
notes about transactions.
=head3 C<Driver>
Type: handle
Holds the handle of the parent driver. The only recommended use for this
is to find the name of the driver using:
$dbh->{Driver}->{Name}
=head3 C<Name>
Type: string
Holds the "name" of the database. Usually (and recommended to be) the
same as the "C<dbi:DriverName:...>" string used to connect to the database,
but with the leading "C<dbi:DriverName:>" removed.
=head3 C<Statement>
Type: string, read-only
Returns the statement string passed to the most recent L</prepare> or
L</do> method called in this database handle, even if that method
failed. This is especially useful where C<RaiseError> is enabled and
the exception handler checks $@ and sees that a 'prepare' method call
failed.
=head3 C<RowCacheSize>
Type: integer
A hint to the driver indicating the size of the local row cache that the
application would like the driver to use for future C<SELECT> statements.
If a row cache is not implemented, then setting C<RowCacheSize> is ignored
and getting the value returns C<undef>.
Some C<RowCacheSize> values have special meaning, as follows:
0 - Automatically determine a reasonable cache size for each C<SELECT>
1 - Disable the local row cache
>1 - Cache this many rows
<0 - Cache as many rows that will fit into this much memory for each C<SELECT>.
Note that large cache sizes may require a very large amount of memory
(I<cached rows * maximum size of row>). Also, a large cache will cause
a longer delay not only for the first fetch, but also whenever the
cache needs refilling.
See also the L</RowsInCache> statement handle attribute.
=head3 C<Username>
Type: string
Returns the username used to connect to the database.
=head1 DBI STATEMENT HANDLE OBJECTS
This section lists the methods and attributes associated with DBI
statement handles.
=head2 Statement Handle Methods
The DBI defines the following methods for use on DBI statement handles:
=head3 C<bind_param>
$sth->bind_param($p_num, $bind_value)
$sth->bind_param($p_num, $bind_value, \%attr)
$sth->bind_param($p_num, $bind_value, $bind_type)
The C<bind_param> method takes a copy of $bind_value and associates it
(binds it) with a placeholder, identified by $p_num, embedded in
the prepared statement. Placeholders are indicated with question
mark character (C<?>). For example:
$dbh->{RaiseError} = 1; # save having to check each method call
$sth = $dbh->prepare("SELECT name, age FROM people WHERE name LIKE ?");
$sth->bind_param(1, "John%"); # placeholders are numbered from 1
$sth->execute;
DBI::dump_results($sth);
See L</Placeholders and Bind Values> for more information.
B<Data Types for Placeholders>
The C<\%attr> parameter can be used to hint at the data type the
placeholder should have. This is rarely needed. Typically, the driver is only
interested in knowing if the placeholder should be bound as a number or a string.
$sth->bind_param(1, $value, { TYPE => SQL_INTEGER });
As a short-cut for the common case, the data type can be passed
directly, in place of the C<\%attr> hash reference. This example is
equivalent to the one above:
$sth->bind_param(1, $value, SQL_INTEGER);
The C<TYPE> value indicates the standard (non-driver-specific) type for
this parameter. To specify the driver-specific type, the driver may
support a driver-specific attribute, such as C<{ ora_type =E<gt> 97 }>.
The SQL_INTEGER and other related constants can be imported using
use DBI qw(:sql_types);
See L</"DBI Constants"> for more information.
The data type is 'sticky' in that bind values passed to execute() are bound
with the data type specified by earlier bind_param() calls, if any.
Portable applications should not rely on being able to change the data type
after the first C<bind_param> call.
Perl only has string and number scalar data types. All database types
that aren't numbers are bound as strings and must be in a format the
database will understand except where the bind_param() TYPE attribute
specifies a type that implies a particular format. For example, given:
$sth->bind_param(1, $value, SQL_DATETIME);
the driver should expect $value to be in the ODBC standard SQL_DATETIME
format, which is 'YYYY-MM-DD HH:MM:SS'. Similarly for SQL_DATE, SQL_TIME etc.
As an alternative to specifying the data type in the C<bind_param> call,
you can let the driver pass the value as the default type (C<VARCHAR>).
You can then use an SQL function to convert the type within the statement.
For example:
INSERT INTO price(code, price) VALUES (?, CONVERT(MONEY,?))
The C<CONVERT> function used here is just an example. The actual function
and syntax will vary between different databases and is non-portable.
See also L</Placeholders and Bind Values> for more information.
=head3 C<bind_param_inout>
$rc = $sth->bind_param_inout($p_num, \$bind_value, $max_len) or die $sth->errstr;
$rv = $sth->bind_param_inout($p_num, \$bind_value, $max_len, \%attr) or ...
$rv = $sth->bind_param_inout($p_num, \$bind_value, $max_len, $bind_type) or ...
This method acts like L</bind_param>, but also enables values to be
updated by the statement. The statement is typically
a call to a stored procedure. The C<$bind_value> must be passed as a
reference to the actual value to be used.
Note that unlike L</bind_param>, the C<$bind_value> variable is not
copied when C<bind_param_inout> is called. Instead, the value in the
variable is read at the time L</execute> is called.
The additional C<$max_len> parameter specifies the minimum amount of
memory to allocate to C<$bind_value> for the new value. If the value
returned from the database is too
big to fit, then the execution should fail. If unsure what value to use,
pick a generous length, i.e., a length larger than the longest value that would ever be
returned. The only cost of using a larger value than needed is wasted memory.
Undefined values or C<undef> are used to indicate null values.
See also L</Placeholders and Bind Values> for more information.
=head3 C<bind_param_array>
$rc = $sth->bind_param_array($p_num, $array_ref_or_value)
$rc = $sth->bind_param_array($p_num, $array_ref_or_value, \%attr)
$rc = $sth->bind_param_array($p_num, $array_ref_or_value, $bind_type)
The C<bind_param_array> method is used to bind an array of values
to a placeholder embedded in the prepared statement which is to be executed
with L</execute_array>. For example:
$dbh->{RaiseError} = 1; # save having to check each method call
$sth = $dbh->prepare("INSERT INTO staff (first_name, last_name, dept) VALUES(?, ?, ?)");
$sth->bind_param_array(1, [ 'John', 'Mary', 'Tim' ]);
$sth->bind_param_array(2, [ 'Booth', 'Todd', 'Robinson' ]);
$sth->bind_param_array(3, "SALES"); # scalar will be reused for each row
$sth->execute_array( { ArrayTupleStatus => \my @tuple_status } );
The C<%attr> ($bind_type) argument is the same as defined for L</bind_param>.
Refer to L</bind_param> for general details on using placeholders.
(Note that bind_param_array() can I<not> be used to expand a
placeholder into a list of values for a statement like "SELECT foo
WHERE bar IN (?)". A placeholder can only ever represent one value
per execution.)
Scalar values, including C<undef>, may also be bound by
C<bind_param_array>. In which case the same value will be used for each
L</execute> call. Driver-specific implementations may behave
differently, e.g., when binding to a stored procedure call, some
databases may permit mixing scalars and arrays as arguments.
The default implementation provided by DBI (for drivers that have
not implemented array binding) is to iteratively call L</execute> for
each parameter tuple provided in the bound arrays. Drivers may
provide more optimized implementations using whatever bulk operation
support the database API provides. The default driver behaviour should
match the default DBI behaviour, but always consult your driver
documentation as there may be driver specific issues to consider.
Note that the default implementation currently only supports non-data
returning statements (INSERT, UPDATE, but not SELECT). Also,
C<bind_param_array> and L</bind_param> cannot be mixed in the same
statement execution, and C<bind_param_array> must be used with
L</execute_array>; using C<bind_param_array> will have no effect
for L</execute>.
The C<bind_param_array> method was added in DBI 1.22.
=head3 C<execute>
$rv = $sth->execute or die $sth->errstr;
$rv = $sth->execute(@bind_values) or die $sth->errstr;
Perform whatever processing is necessary to execute the prepared
statement. An C<undef> is returned if an error occurs. A successful
C<execute> always returns true regardless of the number of rows affected,
even if it's zero (see below). It is always important to check the
return status of C<execute> (and most other DBI methods) for errors
if you're not using L</RaiseError>.
For a I<non>-C<SELECT> statement, C<execute> returns the number of rows
affected, if known. If no rows were affected, then C<execute> returns
"C<0E0>", which Perl will treat as 0 but will regard as true. Note that it
is I<not> an error for no rows to be affected by a statement. If the
number of rows affected is not known, then C<execute> returns -1.
For C<SELECT> statements, execute simply "starts" the query within the
database engine. Use one of the fetch methods to retrieve the data after
calling C<execute>. The C<execute> method does I<not> return the number of
rows that will be returned by the query (because most databases can't
tell in advance), it simply returns a true value.
You can tell if the statement was a C<SELECT> statement by checking if
C<$sth-E<gt>{NUM_OF_FIELDS}> is greater than zero after calling C<execute>.
If any arguments are given, then C<execute> will effectively call
L</bind_param> for each value before executing the statement. Values
bound in this way are usually treated as C<SQL_VARCHAR> types unless
the driver can determine the correct type (which is rare), or unless
C<bind_param> (or C<bind_param_inout>) has already been used to
specify the type.
Note that passing C<execute> an empty array is the same as passing no arguments
at all, which will execute the statement with previously bound values.
That's probably not what you want.
If execute() is called on a statement handle that's still active
($sth->{Active} is true) then it should effectively call finish()
to tidy up the previous execution results before starting this new
execution.
=head3 C<execute_array>
$tuples = $sth->execute_array(\%attr) or die $sth->errstr;
$tuples = $sth->execute_array(\%attr, @bind_values) or die $sth->errstr;
($tuples, $rows) = $sth->execute_array(\%attr) or die $sth->errstr;
($tuples, $rows) = $sth->execute_array(\%attr, @bind_values) or die $sth->errstr;
Execute the prepared statement once for each parameter tuple
(group of values) provided either in the @bind_values, or by prior
calls to L</bind_param_array>, or via a reference passed in \%attr.
When called in scalar context the execute_array() method returns the
number of tuples executed, or C<undef> if an error occurred. Like
execute(), a successful execute_array() always returns true regardless
of the number of tuples executed, even if it's zero. If there were any
errors the ArrayTupleStatus array can be used to discover which tuples
failed and with what errors.
When called in list context the execute_array() method returns two scalars;
$tuples is the same as calling execute_array() in scalar context and $rows is
the number of rows affected for each tuple, if available or
-1 if the driver cannot determine this. NOTE, some drivers cannot determine
the number of rows affected per tuple but can provide the number of rows
affected for the batch.
If you are doing an update operation the returned rows affected may not be what
you expect if, for instance, one or more of the tuples affected the same row
multiple times. Some drivers may not yet support list context, in which case
$rows will be undef, or may not be able to provide the number of rows affected
when performing this batch operation, in which case $rows will be -1.
Bind values for the tuples to be executed may be supplied row-wise
by an C<ArrayTupleFetch> attribute, or else column-wise in the
C<@bind_values> argument, or else column-wise by prior calls to
L</bind_param_array>.
Where column-wise binding is used (via the C<@bind_values> argument
or calls to bind_param_array()) the maximum number of elements in
any one of the bound value arrays determines the number of tuples
executed. Placeholders with fewer values in their parameter arrays
are treated as if padded with undef (NULL) values.
If a scalar value is bound, instead of an array reference, it is
treated as a I<variable> length array with all elements having the
same value. It does not influence the number of tuples executed,
so if all bound arrays have zero elements then zero tuples will
be executed. If I<all> bound values are scalars then one tuple
will be executed, making execute_array() act just like execute().
The C<ArrayTupleFetch> attribute can be used to specify a reference
to a subroutine that will be called to provide the bind values for
each tuple execution. The subroutine should return an reference to
an array which contains the appropriate number of bind values, or
return an undef if there is no more data to execute.
As a convenience, the C<ArrayTupleFetch> attribute can also be
used to specify a statement handle. In which case the fetchrow_arrayref()
method will be called on the given statement handle in order to
provide the bind values for each tuple execution.
The values specified via bind_param_array() or the @bind_values
parameter may be either scalars, or arrayrefs. If any C<@bind_values>
are given, then C<execute_array> will effectively call L</bind_param_array>
for each value before executing the statement. Values bound in
this way are usually treated as C<SQL_VARCHAR> types unless the
driver can determine the correct type (which is rare), or unless
C<bind_param>, C<bind_param_inout>, C<bind_param_array>, or
C<bind_param_inout_array> has already been used to specify the type.
See L</bind_param_array> for details.
The C<ArrayTupleStatus> attribute can be used to specify a
reference to an array which will receive the execute status of each
executed parameter tuple. Note the C<ArrayTupleStatus> attribute was
mandatory until DBI 1.38.
For tuples which are successfully executed, the element at the same
ordinal position in the status array is the resulting rowcount (or -1
if unknown).
If the execution of a tuple causes an error, then the corresponding
status array element will be set to a reference to an array containing
L</err>, L</errstr> and L</state> set by the failed execution.
If B<any> tuple execution returns an error, C<execute_array> will
return C<undef>. In that case, the application should inspect the
status array to determine which parameter tuples failed.
Some databases may not continue executing tuples beyond the first
failure. In this case the status array will either hold fewer
elements, or the elements beyond the failure will be undef.
If all parameter tuples are successfully executed, C<execute_array>
returns the number tuples executed. If no tuples were executed,
then execute_array() returns "C<0E0>", just like execute() does,
which Perl will treat as 0 but will regard as true.
For example:
$sth = $dbh->prepare("INSERT INTO staff (first_name, last_name) VALUES (?, ?)");
my $tuples = $sth->execute_array(
{ ArrayTupleStatus => \my @tuple_status },
\@first_names,
\@last_names,
);
if ($tuples) {
print "Successfully inserted $tuples records\n";
}
else {
for my $tuple (0..@last_names-1) {
my $status = $tuple_status[$tuple];
$status = [0, "Skipped"] unless defined $status;
next unless ref $status;
printf "Failed to insert (%s, %s): %s\n",
$first_names[$tuple], $last_names[$tuple], $status->[1];
}
}
Support for data returning statements such as SELECT is driver-specific
and subject to change. At present, the default implementation
provided by DBI only supports non-data returning statements.
Transaction semantics when using array binding are driver and
database specific. If C<AutoCommit> is on, the default DBI
implementation will cause each parameter tuple to be individually
committed (or rolled back in the event of an error). If C<AutoCommit>
is off, the application is responsible for explicitly committing
the entire set of bound parameter tuples. Note that different
drivers and databases may have different behaviours when some
parameter tuples cause failures. In some cases, the driver or
database may automatically rollback the effect of all prior parameter
tuples that succeeded in the transaction; other drivers or databases
may retain the effect of prior successfully executed parameter
tuples. Be sure to check your driver and database for its specific
behaviour.
Note that, in general, performance will usually be better with
C<AutoCommit> turned off, and using explicit C<commit> after each
C<execute_array> call.
The C<execute_array> method was added in DBI 1.22, and ArrayTupleFetch
was added in 1.36.
=head3 C<execute_for_fetch>
$tuples = $sth->execute_for_fetch($fetch_tuple_sub);
$tuples = $sth->execute_for_fetch($fetch_tuple_sub, \@tuple_status);
($tuples, $rows) = $sth->execute_for_fetch($fetch_tuple_sub);
($tuples, $rows) = $sth->execute_for_fetch($fetch_tuple_sub, \@tuple_status);
The execute_for_fetch() method is used to perform bulk operations and
although it is most often used via the execute_array() method you can
use it directly. The main difference between execute_array and
execute_for_fetch is the former does column or row-wise binding and
the latter uses row-wise binding.
The fetch subroutine, referenced by $fetch_tuple_sub, is expected
to return a reference to an array (known as a 'tuple') or undef.
The execute_for_fetch() method calls $fetch_tuple_sub, without any
parameters, until it returns a false value. Each tuple returned is
used to provide bind values for an $sth->execute(@$tuple) call.
In scalar context execute_for_fetch() returns C<undef> if there were any
errors and the number of tuples executed otherwise. Like execute() and
execute_array() a zero is returned as "0E0" so execute_for_fetch() is
only false on error. If there were any errors the @tuple_status array
can be used to discover which tuples failed and with what errors.
When called in list context execute_for_fetch() returns two scalars;
$tuples is the same as calling execute_for_fetch() in scalar context and $rows is
the sum of the number of rows affected for each tuple, if available or -1
if the driver cannot determine this.
If you are doing an update operation the returned rows affected may not be what
you expect if, for instance, one or more of the tuples affected the same row
multiple times. Some drivers may not yet support list context, in which case
$rows will be undef, or may not be able to provide the number of rows affected
when performing this batch operation, in which case $rows will be -1.
If \@tuple_status is passed then the execute_for_fetch method uses
it to return status information. The tuple_status array holds one
element per tuple. If the corresponding execute() did not fail then
the element holds the return value from execute(), which is typically
a row count. If the execute() did fail then the element holds a
reference to an array containing ($sth->err, $sth->errstr, $sth->state).
If the driver detects an error that it knows means no further tuples can be
executed then it may return, with an error status, even though $fetch_tuple_sub
may still have more tuples to be executed.
Although each tuple returned by $fetch_tuple_sub is effectively used
to call $sth->execute(@$tuple_array_ref) the exact timing may vary.
Drivers are free to accumulate sets of tuples to pass to the
database server in bulk group operations for more efficient execution.
However, the $fetch_tuple_sub is specifically allowed to return
the same array reference each time (which is what fetchrow_arrayref()
usually does).
For example:
my $sel = $dbh1->prepare("select foo, bar from table1");
$sel->execute;
my $ins = $dbh2->prepare("insert into table2 (foo, bar) values (?,?)");
my $fetch_tuple_sub = sub { $sel->fetchrow_arrayref };
my @tuple_status;
$rc = $ins->execute_for_fetch($fetch_tuple_sub, \@tuple_status);
my @errors = grep { ref $_ } @tuple_status;
Similarly, if you already have an array containing the data rows
to be processed you'd use a subroutine to shift off and return
each array ref in turn:
$ins->execute_for_fetch( sub { shift @array_of_arrays }, \@tuple_status);
The C<execute_for_fetch> method was added in DBI 1.38.
=head3 C<fetchrow_arrayref>
$ary_ref = $sth->fetchrow_arrayref;
$ary_ref = $sth->fetch; # alias
Fetches the next row of data and returns a reference to an array
holding the field values. Null fields are returned as C<undef>
values in the array.
This is the fastest way to fetch data, particularly if used with
C<$sth-E<gt>bind_columns>.
If there are no more rows or if an error occurs, then C<fetchrow_arrayref>
returns an C<undef>. You should check C<$sth-E<gt>err> afterwards (or use the
C<RaiseError> attribute) to discover if the C<undef> returned was due to an
error.
Note that the same array reference is returned for each fetch, so don't
store the reference and then use it after a later fetch. Also, the
elements of the array are also reused for each row, so take care if you
want to take a reference to an element. See also L</bind_columns>.
=head3 C<fetchrow_array>
@ary = $sth->fetchrow_array;
An alternative to C<fetchrow_arrayref>. Fetches the next row of data
and returns it as a list containing the field values. Null fields
are returned as C<undef> values in the list.
If there are no more rows or if an error occurs, then C<fetchrow_array>
returns an empty list. You should check C<$sth-E<gt>err> afterwards (or use
the C<RaiseError> attribute) to discover if the empty list returned was
due to an error.
If called in a scalar context for a statement handle that has more
than one column, it is undefined whether the driver will return
the value of the first column or the last. So don't do that.
Also, in a scalar context, an C<undef> is returned if there are no
more rows or if an error occurred. That C<undef> can't be distinguished
from an C<undef> returned because the first field value was NULL.
For these reasons you should exercise some caution if you use
C<fetchrow_array> in a scalar context.
=head3 C<fetchrow_hashref>
$hash_ref = $sth->fetchrow_hashref;
$hash_ref = $sth->fetchrow_hashref($name);
An alternative to C<fetchrow_arrayref>. Fetches the next row of data
and returns it as a reference to a hash containing field name and field
value pairs. Null fields are returned as C<undef> values in the hash.
If there are no more rows or if an error occurs, then C<fetchrow_hashref>
returns an C<undef>. You should check C<$sth-E<gt>err> afterwards (or use the
C<RaiseError> attribute) to discover if the C<undef> returned was due to an
error.
The optional C<$name> parameter specifies the name of the statement handle
attribute. For historical reasons it defaults to "C<NAME>", however using
either "C<NAME_lc>" or "C<NAME_uc>" is recommended for portability.
The keys of the hash are the same names returned by C<$sth-E<gt>{$name}>. If
more than one field has the same name, there will only be one entry in the
returned hash for those fields, so statements like "C<select foo, foo from bar>"
will return only a single key from C<fetchrow_hashref>. In these cases use
column aliases or C<fetchrow_arrayref>. Note that it is the database server
(and not the DBD implementation) which provides the I<name> for fields
containing functions like "C<count(*)>" or "C<max(c_foo)>" and they may clash
with existing column names (most databases don't care about duplicate column
names in a result-set). If you want these to return as unique names that are
the same across databases, use I<aliases>, as in "C<select count(*) as cnt>"
or "C<select max(c_foo) mx_foo, ...>" depending on the syntax your database
supports.
Because of the extra work C<fetchrow_hashref> and Perl have to perform, it
is not as efficient as C<fetchrow_arrayref> or C<fetchrow_array>.
By default a reference to a new hash is returned for each row.
It is likely that a future version of the DBI will support an
attribute which will enable the same hash to be reused for each
row. This will give a significant performance boost, but it won't
be enabled by default because of the risk of breaking old code.
=head3 C<fetchall_arrayref>
$tbl_ary_ref = $sth->fetchall_arrayref;
$tbl_ary_ref = $sth->fetchall_arrayref( $slice );
$tbl_ary_ref = $sth->fetchall_arrayref( $slice, $max_rows );
The C<fetchall_arrayref> method can be used to fetch all the data to be
returned from a prepared and executed statement handle. It returns a
reference to an array that contains one reference per row.
If called on an I<inactive> statement handle, C<fetchall_arrayref> returns undef.
If there are no rows left to return from an I<active> statement handle, C<fetchall_arrayref> returns a reference
to an empty array. If an error occurs, C<fetchall_arrayref> returns the
data fetched thus far, which may be none. You should check C<$sth-E<gt>err>
afterwards (or use the C<RaiseError> attribute) to discover if the data is
complete or was truncated due to an error.
If $slice is an array reference, C<fetchall_arrayref> uses L</fetchrow_arrayref>
to fetch each row as an array ref. If the $slice array is not empty
then it is used as a slice to select individual columns by perl array
index number (starting at 0, unlike column and parameter numbers which
start at 1).
With no parameters, or if $slice is undefined, C<fetchall_arrayref>
acts as if passed an empty array ref.
For example, to fetch just the first column of every row:
$tbl_ary_ref = $sth->fetchall_arrayref([0]);
To fetch the second to last and last column of every row:
$tbl_ary_ref = $sth->fetchall_arrayref([-2,-1]);
Those two examples both return a reference to an array of array refs.
If $slice is a hash reference, C<fetchall_arrayref> fetches each row as a hash
reference. If the $slice hash is empty then the keys in the hashes have
whatever name lettercase is returned by default. (See L</FetchHashKeyName>
attribute.) If the $slice hash is I<not> empty, then it is used as a slice to
select individual columns by name. The values of the hash should be set to 1.
The key names of the returned hashes match the letter case of the names in the
parameter hash, regardless of the L</FetchHashKeyName> attribute.
For example, to fetch all fields of every row as a hash ref:
$tbl_ary_ref = $sth->fetchall_arrayref({});
To fetch only the fields called "foo" and "bar" of every row as a hash ref
(with keys named "foo" and "BAR", regardless of the original capitalization):
$tbl_ary_ref = $sth->fetchall_arrayref({ foo=>1, BAR=>1 });
Those two examples both return a reference to an array of hash refs.
If $slice is a I<reference to a hash reference>, that hash is used to select
and rename columns. The keys are 0-based column index numbers and the values
are the corresponding keys for the returned row hashes.
For example, to fetch only the first and second columns of every row as a hash
ref (with keys named "k" and "v" regardless of their original names):
$tbl_ary_ref = $sth->fetchall_arrayref( \{ 0 => 'k', 1 => 'v' } );
If $max_rows is defined and greater than or equal to zero then it
is used to limit the number of rows fetched before returning.
fetchall_arrayref() can then be called again to fetch more rows.
This is especially useful when you need the better performance of
fetchall_arrayref() but don't have enough memory to fetch and return
all the rows in one go.
Here's an example (assumes RaiseError is enabled):
my $rows = []; # cache for batches of rows
while( my $row = ( shift(@$rows) || # get row from cache, or reload cache:
shift(@{$rows=$sth->fetchall_arrayref(undef,10_000)||[]}) )
) {
...
}
That I<might> be the fastest way to fetch and process lots of rows using the DBI,
but it depends on the relative cost of method calls vs memory allocation.
A standard C<while> loop with column binding is often faster because
the cost of allocating memory for the batch of rows is greater than
the saving by reducing method calls. It's possible that the DBI may
provide a way to reuse the memory of a previous batch in future, which
would then shift the balance back towards fetchall_arrayref().
=head3 C<fetchall_hashref>
$hash_ref = $sth->fetchall_hashref($key_field);
The C<fetchall_hashref> method can be used to fetch all the data to be
returned from a prepared and executed statement handle. It returns a reference
to a hash containing a key for each distinct value of the $key_field column
that was fetched. For each key the corresponding value is a reference to a hash
containing all the selected columns and their values, as returned by
C<fetchrow_hashref()>.
If there are no rows to return, C<fetchall_hashref> returns a reference
to an empty hash. If an error occurs, C<fetchall_hashref> returns the
data fetched thus far, which may be none. You should check
C<$sth-E<gt>err> afterwards (or use the C<RaiseError> attribute) to
discover if the data is complete or was truncated due to an error.
The $key_field parameter provides the name of the field that holds the
value to be used for the key for the returned hash. For example:
$dbh->{FetchHashKeyName} = 'NAME_lc';
$sth = $dbh->prepare("SELECT FOO, BAR, ID, NAME, BAZ FROM TABLE");
$sth->execute;
$hash_ref = $sth->fetchall_hashref('id');
print "Name for id 42 is $hash_ref->{42}->{name}\n";
The $key_field parameter can also be specified as an integer column
number (counting from 1). If $key_field doesn't match any column in
the statement, as a name first then as a number, then an error is
returned.
For queries returning more than one 'key' column, you can specify
multiple column names by passing $key_field as a reference to an
array containing one or more key column names (or index numbers).
For example:
$sth = $dbh->prepare("SELECT foo, bar, baz FROM table");
$sth->execute;
$hash_ref = $sth->fetchall_hashref( [ qw(foo bar) ] );
print "For foo 42 and bar 38, baz is $hash_ref->{42}->{38}->{baz}\n";
The fetchall_hashref() method is normally used only where the key
fields values for each row are unique. If multiple rows are returned
with the same values for the key fields then later rows overwrite
earlier ones.
=head3 C<finish>
$rc = $sth->finish;
Indicate that no more data will be fetched from this statement handle
before it is either executed again or destroyed. You almost certainly
do I<not> need to call this method.
Adding calls to C<finish> after loop that fetches all rows is a common mistake,
don't do it, it can mask genuine problems like uncaught fetch errors.
When all the data has been fetched from a C<SELECT> statement, the driver will
automatically call C<finish> for you. So you should I<not> call it explicitly
I<except> when you know that you've not fetched all the data from a statement
handle I<and> the handle won't be destroyed soon.
The most common example is when you only want to fetch just one row,
but in that case the C<selectrow_*> methods are usually better anyway.
Consider a query like:
SELECT foo FROM table WHERE bar=? ORDER BY baz
on a very large table. When executed, the database server will have to use
temporary buffer space to store the sorted rows. If, after executing
the handle and selecting just a few rows, the handle won't be re-executed for
some time and won't be destroyed, the C<finish> method can be used to tell
the server that the buffer space can be freed.
Calling C<finish> resets the L</Active> attribute for the statement. It
may also make some statement handle attributes (such as C<NAME> and C<TYPE>)
unavailable if they have not already been accessed (and thus cached).
The C<finish> method does not affect the transaction status of the
database connection. It has nothing to do with transactions. It's mostly an
internal "housekeeping" method that is rarely needed.
See also L</disconnect> and the L</Active> attribute.
The C<finish> method should have been called C<discard_pending_rows>.
=head3 C<rows>
$rv = $sth->rows;
Returns the number of rows affected by the last row affecting command,
or -1 if the number of rows is not known or not available.
Generally, you can only rely on a row count after a I<non>-C<SELECT>
C<execute> (for some specific operations like C<UPDATE> and C<DELETE>), or
after fetching all the rows of a C<SELECT> statement.
For C<SELECT> statements, it is generally not possible to know how many
rows will be returned except by fetching them all. Some drivers will
return the number of rows the application has fetched so far, but
others may return -1 until all rows have been fetched. So use of the
C<rows> method or C<$DBI::rows> with C<SELECT> statements is not
recommended.
One alternative method to get a row count for a C<SELECT> is to execute a
"SELECT COUNT(*) FROM ..." SQL statement with the same "..." as your
query and then fetch the row count from that.
=head3 C<bind_col>
$rc = $sth->bind_col($column_number, \$var_to_bind);
$rc = $sth->bind_col($column_number, \$var_to_bind, \%attr );
$rc = $sth->bind_col($column_number, \$var_to_bind, $bind_type );
Binds a Perl variable and/or some attributes to an output column
(field) of a C<SELECT> statement. Column numbers count up from 1.
You do not need to bind output columns in order to fetch data.
For maximum portability between drivers, bind_col() should be called
after execute() and not before.
See also L</bind_columns> for an example.
The binding is performed at a low level using Perl aliasing.
Whenever a row is fetched from the database $var_to_bind appears
to be automatically updated simply because it now refers to the same
memory location as the corresponding column value. This makes using
bound variables very efficient.
Binding a tied variable doesn't work, currently.
The L</bind_param> method
performs a similar, but opposite, function for input variables.
B<Data Types for Column Binding>
The C<\%attr> parameter can be used to hint at the data type
formatting the column should have. For example, you can use:
$sth->bind_col(1, undef, { TYPE => SQL_DATETIME });
to specify that you'd like the column (which presumably is some
kind of datetime type) to be returned in the standard format for
SQL_DATETIME, which is 'YYYY-MM-DD HH:MM:SS', rather than the
native formatting the database would normally use.
There's no $var_to_bind in that example to emphasize the point
that bind_col() works on the underlying column and not just
a particular bound variable.
As a short-cut for the common case, the data type can be passed
directly, in place of the C<\%attr> hash reference. This example is
equivalent to the one above:
$sth->bind_col(1, undef, SQL_DATETIME);
The C<TYPE> value indicates the standard (non-driver-specific) type for
this parameter. To specify the driver-specific type, the driver may
support a driver-specific attribute, such as C<{ ora_type =E<gt> 97 }>.
The SQL_DATETIME and other related constants can be imported using
use DBI qw(:sql_types);
See L</"DBI Constants"> for more information.
Few drivers support specifying a data type via a C<bind_col> call
(most will simply ignore the data type). Fewer still allow the data
type to be altered once set. If you do set a column type the type
should remain sticky through further calls to bind_col for the same
column if the type is not overridden (this is important for instance
when you are using a slice in fetchall_arrayref).
The TYPE attribute for bind_col() was first specified in DBI 1.41.
From DBI 1.611, drivers can use the C<TYPE> attribute to attempt to
cast the bound scalar to a perl type which more closely matches
C<TYPE>. At present DBI supports C<SQL_INTEGER>, C<SQL_DOUBLE> and
C<SQL_NUMERIC>. See L</sql_type_cast> for details of how types are
cast.
B<Other attributes for Column Binding>
The C<\%attr> parameter may also contain the following attributes:
=over
=item C<StrictlyTyped>
If a C<TYPE> attribute is passed to bind_col, then the driver will
attempt to change the bound perl scalar to match the type more
closely. If the bound value cannot be cast to the requested C<TYPE>
then by default it is left untouched and no error is generated. If you
specify C<StrictlyTyped> as 1 and the cast fails, this will generate
an error.
This attribute was first added in DBI 1.611. When 1.611 was released
few drivers actually supported this attribute but DBD::Oracle and
DBD::ODBC should from versions 1.24.
=item C<DiscardString>
When the C<TYPE> attribute is passed to L</bind_col> and the driver
successfully casts the bound perl scalar to a non-string type
then if C<DiscardString> is set to 1, the string portion of the
scalar will be discarded. By default, C<DiscardString> is not set.
This attribute was first added in DBI 1.611. When 1.611 was released
few drivers actually supported this attribute but DBD::Oracle and
DBD::ODBC should from versions 1.24.
=back
=head3 C<bind_columns>
$rc = $sth->bind_columns(@list_of_refs_to_vars_to_bind);
Calls L</bind_col> for each column of the C<SELECT> statement.
The list of references should have the same number of elements as the number of
columns in the C<SELECT> statement. If it doesn't then C<bind_columns> will
bind the elements given, up to the number of columns, and then return an error.
For maximum portability between drivers, bind_columns() should be called
after execute() and not before.
For example:
$dbh->{RaiseError} = 1; # do this, or check every call for errors
$sth = $dbh->prepare(q{ SELECT region, sales FROM sales_by_region });
$sth->execute;
my ($region, $sales);
# Bind Perl variables to columns:
$rv = $sth->bind_columns(\$region, \$sales);
# you can also use Perl's \(...) syntax (see perlref docs):
# $sth->bind_columns(\($region, $sales));
# Column binding is the most efficient way to fetch data
while ($sth->fetch) {
print "$region: $sales\n";
}
For compatibility with old scripts, the first parameter will be
ignored if it is C<undef> or a hash reference.
Here's a more fancy example that binds columns to the values I<inside>
a hash (thanks to H.Merijn Brand):
$sth->execute;
my %row;
$sth->bind_columns( \( @row{ @{$sth->{NAME_lc} } } ));
while ($sth->fetch) {
print "$row{region}: $row{sales}\n";
}
=head3 C<dump_results>
$rows = $sth->dump_results($maxlen, $lsep, $fsep, $fh);
Fetches all the rows from C<$sth>, calls C<DBI::neat_list> for each row, and
prints the results to C<$fh> (defaults to C<STDOUT>) separated by C<$lsep>
(default C<"\n">). C<$fsep> defaults to C<", "> and C<$maxlen> defaults to 35.
This method is designed as a handy utility for prototyping and
testing queries. Since it uses L</neat_list> to
format and edit the string for reading by humans, it is not recommended
for data transfer applications.
=head2 Statement Handle Attributes
This section describes attributes specific to statement handles. Most
of these attributes are read-only.
Changes to these statement handle attributes do not affect any other
existing or future statement handles.
Attempting to set or get the value of an unknown attribute generates a warning,
except for private driver specific attributes (which all have names
starting with a lowercase letter).
Example:
... = $h->{NUM_OF_FIELDS}; # get/read
Some drivers cannot provide valid values for some or all of these
attributes until after C<$sth-E<gt>execute> has been successfully
called. Typically the attribute will be C<undef> in these situations.
Some attributes, like NAME, are not appropriate to some types of
statement, like SELECT. Typically the attribute will be C<undef>
in these situations.
For drivers which support stored procedures and multiple result sets
(see L</more_results>) these attributes relate to the I<current> result set.
See also L</finish> to learn more about the effect it
may have on some attributes.
=head3 C<NUM_OF_FIELDS>
Type: integer, read-only
Number of fields (columns) in the data the prepared statement may return.
Statements that don't return rows of data, like C<DELETE> and C<CREATE>
set C<NUM_OF_FIELDS> to 0 (though it may be undef in some drivers).
=head3 C<NUM_OF_PARAMS>
Type: integer, read-only
The number of parameters (placeholders) in the prepared statement.
See SUBSTITUTION VARIABLES below for more details.
=head3 C<NAME>
Type: array-ref, read-only
Returns a reference to an array of field names for each column. The
names may contain spaces but should not be truncated or have any
trailing space. Note that the names have the letter case (upper, lower
or mixed) as returned by the driver being used. Portable applications
should use L</NAME_lc> or L</NAME_uc>.
print "First column name: $sth->{NAME}->[0]\n";
Also note that the name returned for (aggregate) functions like C<count(*)>
or C<max(c_foo)> is determined by the database server and not by C<DBI> or
the C<DBD> backend.
=head3 C<NAME_lc>
Type: array-ref, read-only
Like C</NAME> but always returns lowercase names.
=head3 C<NAME_uc>
Type: array-ref, read-only
Like C</NAME> but always returns uppercase names.
=head3 C<NAME_hash>
Type: hash-ref, read-only
=head3 C<NAME_lc_hash>
Type: hash-ref, read-only
=head3 C<NAME_uc_hash>
Type: hash-ref, read-only
The C<NAME_hash>, C<NAME_lc_hash>, and C<NAME_uc_hash> attributes
return column name information as a reference to a hash.
The keys of the hash are the names of the columns. The letter case of
the keys corresponds to the letter case returned by the C<NAME>,
C<NAME_lc>, and C<NAME_uc> attributes respectively (as described above).
The value of each hash entry is the perl index number of the
corresponding column (counting from 0). For example:
$sth = $dbh->prepare("select Id, Name from table");
$sth->execute;
@row = $sth->fetchrow_array;
print "Name $row[ $sth->{NAME_lc_hash}{name} ]\n";
=head3 C<TYPE>
Type: array-ref, read-only
Returns a reference to an array of integer values for each
column. The value indicates the data type of the corresponding column.
The values correspond to the international standards (ANSI X3.135
and ISO/IEC 9075) which, in general terms, means ODBC. Driver-specific
types that don't exactly match standard types should generally return
the same values as an ODBC driver supplied by the makers of the
database. That might include private type numbers in ranges the vendor
has officially registered with the ISO working group:
ftp://sqlstandards.org/SC32/SQL_Registry/
Where there's no vendor-supplied ODBC driver to be compatible with,
the DBI driver can use type numbers in the range that is now
officially reserved for use by the DBI: -9999 to -9000.
All possible values for C<TYPE> should have at least one entry in the
output of the C<type_info_all> method (see L</type_info_all>).
=head3 C<PRECISION>
Type: array-ref, read-only
Returns a reference to an array of integer values for each column.
For numeric columns, the value is the maximum number of digits
(without considering a sign character or decimal point). Note that
the "display size" for floating point types (REAL, FLOAT, DOUBLE)
can be up to 7 characters greater than the precision (for the
sign + decimal point + the letter E + a sign + 2 or 3 digits).
For any character type column the value is the OCTET_LENGTH,
in other words the number of bytes, not characters.
(More recent standards refer to this as COLUMN_SIZE but we stick
with PRECISION for backwards compatibility.)
=head3 C<SCALE>
Type: array-ref, read-only
Returns a reference to an array of integer values for each column.
NULL (C<undef>) values indicate columns where scale is not applicable.
=head3 C<NULLABLE>
Type: array-ref, read-only
Returns a reference to an array indicating the possibility of each
column returning a null. Possible values are C<0>
(or an empty string) = no, C<1> = yes, C<2> = unknown.
print "First column may return NULL\n" if $sth->{NULLABLE}->[0];
=head3 C<CursorName>
Type: string, read-only
Returns the name of the cursor associated with the statement handle, if
available. If not available or if the database driver does not support the
C<"where current of ..."> SQL syntax, then it returns C<undef>.
=head3 C<Database>
Type: dbh, read-only
Returns the parent $dbh of the statement handle.
=head3 C<Statement>
Type: string, read-only
Returns the statement string passed to the L</prepare> method.
=head3 C<ParamValues>
Type: hash ref, read-only
Returns a reference to a hash containing the values currently bound
to placeholders. The keys of the hash are the 'names' of the
placeholders, typically integers starting at 1. Returns undef if
not supported by the driver.
See L</ShowErrorStatement> for an example of how this is used.
* Keys:
If the driver supports C<ParamValues> but no values have been bound
yet then the driver should return a hash with placeholders names
in the keys but all the values undef, but some drivers may return
a ref to an empty hash because they can't pre-determine the names.
It is possible that the keys in the hash returned by C<ParamValues>
are not exactly the same as those implied by the prepared statement.
For example, DBD::Oracle translates 'C<?>' placeholders into 'C<:pN>'
where N is a sequence number starting at 1.
* Values:
It is possible that the values in the hash returned by C<ParamValues>
are not I<exactly> the same as those passed to bind_param() or execute().
The driver may have slightly modified values in some way based on the
TYPE the value was bound with. For example a floating point value
bound as an SQL_INTEGER type may be returned as an integer.
The values returned by C<ParamValues> can be passed to another
bind_param() method with the same TYPE and will be seen by the
database as the same value. See also L</ParamTypes> below.
The C<ParamValues> attribute was added in DBI 1.28.
=head3 C<ParamTypes>
Type: hash ref, read-only
Returns a reference to a hash containing the type information
currently bound to placeholders.
Returns undef if not supported by the driver.
* Keys:
See L</ParamValues> above.
* Values:
The hash values are hashrefs of type information in the same form as that
passed to the various bind_param() methods (See L</bind_param> for the format
and values).
It is possible that the values in the hash returned by C<ParamTypes>
are not exactly the same as those passed to bind_param() or execute().
Param attributes specified using the abbreviated form, like this:
$sth->bind_param(1, SQL_INTEGER);
are returned in the expanded form, as if called like this:
$sth->bind_param(1, { TYPE => SQL_INTEGER });
The driver may have modified the type information in some way based
on the bound values, other hints provided by the prepare()'d
SQL statement, or alternate type mappings required by the driver or target
database system. The driver may also add private keys (with names beginning
with the drivers reserved prefix, e.g., odbc_xxx).
* Example:
The keys and values in the returned hash can be passed to the various
bind_param() methods to effectively reproduce a previous param binding.
For example:
# assuming $sth1 is a previously prepared statement handle
my $sth2 = $dbh->prepare( $sth1->{Statement} );
my $ParamValues = $sth1->{ParamValues} || {};
my $ParamTypes = $sth1->{ParamTypes} || {};
$sth2->bind_param($_, $ParamValues->{$_}, $ParamTypes->{$_})
for keys %{ {%$ParamValues, %$ParamTypes} };
$sth2->execute();
The C<ParamTypes> attribute was added in DBI 1.49. Implementation
is the responsibility of individual drivers; the DBI layer default
implementation simply returns undef.
=head3 C<ParamArrays>
Type: hash ref, read-only
Returns a reference to a hash containing the values currently bound to
placeholders with L</execute_array> or L</bind_param_array>. The
keys of the hash are the 'names' of the placeholders, typically
integers starting at 1. Returns undef if not supported by the driver
or no arrays of parameters are bound.
Each key value is an array reference containing a list of the bound
parameters for that column.
For example:
$sth = $dbh->prepare("INSERT INTO staff (id, name) values (?,?)");
$sth->execute_array({},[1,2], ['fred','dave']);
if ($sth->{ParamArrays}) {
foreach $param (keys %{$sth->{ParamArrays}}) {
printf "Parameters for %s : %s\n", $param,
join(",", @{$sth->{ParamArrays}->{$param}});
}
}
It is possible that the values in the hash returned by C<ParamArrays>
are not I<exactly> the same as those passed to L</bind_param_array> or
L</execute_array>. The driver may have slightly modified values in some
way based on the TYPE the value was bound with. For example a floating
point value bound as an SQL_INTEGER type may be returned as an
integer.
It is also possible that the keys in the hash returned by
C<ParamArrays> are not exactly the same as those implied by the
prepared statement. For example, DBD::Oracle translates 'C<?>'
placeholders into 'C<:pN>' where N is a sequence number starting at 1.
=head3 C<RowsInCache>
Type: integer, read-only
If the driver supports a local row cache for C<SELECT> statements, then
this attribute holds the number of un-fetched rows in the cache. If the
driver doesn't, then it returns C<undef>. Note that some drivers pre-fetch
rows on execute, whereas others wait till the first fetch.
See also the L</RowCacheSize> database handle attribute.
=head1 FURTHER INFORMATION
=head2 Catalog Methods
An application can retrieve metadata information from the DBMS by issuing
appropriate queries on the views of the Information Schema. Unfortunately,
C<INFORMATION_SCHEMA> views are seldom supported by the DBMS.
Special methods (catalog methods) are available to return result sets
for a small but important portion of that metadata:
column_info
foreign_key_info
primary_key_info
table_info
statistics_info
All catalog methods accept arguments in order to restrict the result sets.
Passing C<undef> to an optional argument does not constrain the search for
that argument.
However, an empty string ('') is treated as a regular search criteria
and will only match an empty value.
B<Note>: SQL/CLI and ODBC differ in the handling of empty strings. An
empty string will not restrict the result set in SQL/CLI.
Most arguments in the catalog methods accept only I<ordinary values>, e.g.
the arguments of C<primary_key_info()>.
Such arguments are treated as a literal string, i.e. the case is significant
and quote characters are taken literally.
Some arguments in the catalog methods accept I<search patterns> (strings
containing '_' and/or '%'), e.g. the C<$table> argument of C<column_info()>.
Passing '%' is equivalent to leaving the argument C<undef>.
B<Caveat>: The underscore ('_') is valid and often used in SQL identifiers.
Passing such a value to a search pattern argument may return more rows than
expected!
To include pattern characters as literals, they must be preceded by an
escape character which can be achieved with
$esc = $dbh->get_info( 14 ); # SQL_SEARCH_PATTERN_ESCAPE
$search_pattern =~ s/([_%])/$esc$1/g;
The ODBC and SQL/CLI specifications define a way to change the default
behaviour described above: All arguments (except I<list value arguments>)
are treated as I<identifier> if the C<SQL_ATTR_METADATA_ID> attribute is
set to C<SQL_TRUE>.
I<Quoted identifiers> are very similar to I<ordinary values>, i.e. their
body (the string within the quotes) is interpreted literally.
I<Unquoted identifiers> are compared in UPPERCASE.
The DBI (currently) does not support the C<SQL_ATTR_METADATA_ID> attribute,
i.e. it behaves like an ODBC driver where C<SQL_ATTR_METADATA_ID> is set to
C<SQL_FALSE>.
=head2 Transactions
Transactions are a fundamental part of any robust database system. They
protect against errors and database corruption by ensuring that sets of
related changes to the database take place in atomic (indivisible,
all-or-nothing) units.
This section applies to databases that support transactions and where
C<AutoCommit> is off. See L</AutoCommit> for details of using C<AutoCommit>
with various types of databases.
The recommended way to implement robust transactions in Perl
applications is to enable L</RaiseError> and catch the error that's 'thrown' as
an exception. For example, using L<Try::Tiny>:
use Try::Tiny;
$dbh->{AutoCommit} = 0; # enable transactions, if possible
$dbh->{RaiseError} = 1;
try {
foo(...) # do lots of work here
bar(...) # including inserts
baz(...) # and updates
$dbh->commit; # commit the changes if we get this far
} catch {
warn "Transaction aborted because $_"; # Try::Tiny copies $@ into $_
# now rollback to undo the incomplete changes
# but do it in an eval{} as it may also fail
eval { $dbh->rollback };
# add other application on-error-clean-up code here
};
If the C<RaiseError> attribute is not set, then DBI calls would need to be
manually checked for errors, typically like this:
$h->method(@args) or die $h->errstr;
With C<RaiseError> set, the DBI will automatically C<die> if any DBI method
call on that handle (or a child handle) fails, so you don't have to
test the return value of each method call. See L</RaiseError> for more
details.
A major advantage of the C<eval> approach is that the transaction will be
properly rolled back if I<any> code (not just DBI calls) in the inner
application dies for any reason. The major advantage of using the
C<$h-E<gt>{RaiseError}> attribute is that all DBI calls will be checked
automatically. Both techniques are strongly recommended.
After calling C<commit> or C<rollback> many drivers will not let you
fetch from a previously active C<SELECT> statement handle that's a child
of the same database handle. A typical way round this is to connect the
the database twice and use one connection for C<SELECT> statements.
See L</AutoCommit> and L</disconnect> for other important information
about transactions.
=head2 Handling BLOB / LONG / Memo Fields
Many databases support "blob" (binary large objects), "long", or similar
datatypes for holding very long strings or large amounts of binary
data in a single field. Some databases support variable length long
values over 2,000,000,000 bytes in length.
Since values of that size can't usually be held in memory, and because
databases can't usually know in advance the length of the longest long
that will be returned from a C<SELECT> statement (unlike other data
types), some special handling is required.
In this situation, the value of the C<$h-E<gt>{LongReadLen}>
attribute is used to determine how much buffer space to allocate
when fetching such fields. The C<$h-E<gt>{LongTruncOk}> attribute
is used to determine how to behave if a fetched value can't fit
into the buffer.
See the description of L</LongReadLen> for more information.
When trying to insert long or binary values, placeholders should be used
since there are often limits on the maximum size of an C<INSERT>
statement and the L</quote> method generally can't cope with binary
data. See L</Placeholders and Bind Values>.
=head2 Simple Examples
Here's a complete example program to select and fetch some data:
my $data_source = "dbi::DriverName:db_name";
my $dbh = DBI->connect($data_source, $user, $password)
or die "Can't connect to $data_source: $DBI::errstr";
my $sth = $dbh->prepare( q{
SELECT name, phone
FROM mytelbook
}) or die "Can't prepare statement: $DBI::errstr";
my $rc = $sth->execute
or die "Can't execute statement: $DBI::errstr";
print "Query will return $sth->{NUM_OF_FIELDS} fields.\n\n";
print "Field names: @{ $sth->{NAME} }\n";
while (($name, $phone) = $sth->fetchrow_array) {
print "$name: $phone\n";
}
# check for problems which may have terminated the fetch early
die $sth->errstr if $sth->err;
$dbh->disconnect;
Here's a complete example program to insert some data from a file.
(This example uses C<RaiseError> to avoid needing to check each call).
my $dbh = DBI->connect("dbi:DriverName:db_name", $user, $password, {
RaiseError => 1, AutoCommit => 0
});
my $sth = $dbh->prepare( q{
INSERT INTO table (name, phone) VALUES (?, ?)
});
open FH, "<phone.csv" or die "Unable to open phone.csv: $!";
while (<FH>) {
chomp;
my ($name, $phone) = split /,/;
$sth->execute($name, $phone);
}
close FH;
$dbh->commit;
$dbh->disconnect;
Here's how to convert fetched NULLs (undefined values) into empty strings:
while($row = $sth->fetchrow_arrayref) {
# this is a fast and simple way to deal with nulls:
foreach (@$row) { $_ = '' unless defined }
print "@$row\n";
}
The C<q{...}> style quoting used in these examples avoids clashing with
quotes that may be used in the SQL statement. Use the double-quote like
C<qq{...}> operator if you want to interpolate variables into the string.
See L<perlop/"Quote and Quote-like Operators"> for more details.
=head2 Threads and Thread Safety
Perl 5.7 and later support a new threading model called iThreads.
(The old "5.005 style" threads are not supported by the DBI.)
In the iThreads model each thread has its own copy of the perl
interpreter. When a new thread is created the original perl
interpreter is 'cloned' to create a new copy for the new thread.
If the DBI and drivers are loaded and handles created before the
thread is created then it will get a cloned copy of the DBI, the
drivers and the handles.
However, the internal pointer data within the handles will refer
to the DBI and drivers in the original interpreter. Using those
handles in the new interpreter thread is not safe, so the DBI detects
this and croaks on any method call using handles that don't belong
to the current thread (except for DESTROY).
Because of this (possibly temporary) restriction, newly created
threads must make their own connections to the database. Handles
can't be shared across threads.
But BEWARE, some underlying database APIs (the code the DBD driver
uses to talk to the database, often supplied by the database vendor)
are not thread safe. If it's not thread safe, then allowing more
than one thread to enter the code at the same time may cause
subtle/serious problems. In some cases allowing more than
one thread to enter the code, even if I<not> at the same time,
can cause problems. You have been warned.
Using DBI with perl threads is not yet recommended for production
environments. For more information see
L<http://www.perlmonks.org/index.pl?node_id=288022>
Note: There is a bug in perl 5.8.2 when configured with threads
and debugging enabled (bug #24463) which causes a DBI test to fail.
=head2 Signal Handling and Canceling Operations
[The following only applies to systems with unix-like signal handling.
I'd welcome additions for other systems, especially Windows.]
The first thing to say is that signal handling in Perl versions less
than 5.8 is I<not> safe. There is always a small risk of Perl
crashing and/or core dumping when, or after, handling a signal
because the signal could arrive and be handled while internal data
structures are being changed. If the signal handling code
used those same internal data structures it could cause all manner
of subtle and not-so-subtle problems. The risk was reduced with
5.4.4 but was still present in all perls up through 5.8.0.
Beginning in perl 5.8.0 perl implements 'safe' signal handling if
your system has the POSIX sigaction() routine. Now when a signal
is delivered perl just makes a note of it but does I<not> run the
%SIG handler. The handling is 'deferred' until a 'safe' moment.
Although this change made signal handling safe, it also lead to
a problem with signals being deferred for longer than you'd like.
If a signal arrived while executing a system call, such as waiting
for data on a network connection, the signal is noted and then the
system call that was executing returns with an EINTR error code
to indicate that it was interrupted. All fine so far.
The problem comes when the code that made the system call sees the
EINTR code and decides it's going to call it again. Perl doesn't
do that, but database code sometimes does. If that happens then the
signal handler doesn't get called until later. Maybe much later.
Fortunately there are ways around this which we'll discuss below.
Unfortunately they make signals unsafe again.
The two most common uses of signals in relation to the DBI are for
canceling operations when the user types Ctrl-C (interrupt), and for
implementing a timeout using C<alarm()> and C<$SIG{ALRM}>.
=over 4
=item Cancel
The DBI provides a C<cancel> method for statement handles. The
C<cancel> method should abort the current operation and is designed
to be called from a signal handler. For example:
$SIG{INT} = sub { $sth->cancel };
However, few drivers implement this (the DBI provides a default
method that just returns C<undef>) and, even if implemented, there
is still a possibility that the statement handle, and even the
parent database handle, will not be usable afterwards.
If C<cancel> returns true, then it has successfully
invoked the database engine's own cancel function. If it returns false,
then C<cancel> failed. If it returns C<undef>, then the database
driver does not have cancel implemented - very few do.
=item Timeout
The traditional way to implement a timeout is to set C<$SIG{ALRM}>
to refer to some code that will be executed when an ALRM signal
arrives and then to call alarm($seconds) to schedule an ALRM signal
to be delivered $seconds in the future. For example:
my $failed;
eval {
local $SIG{ALRM} = sub { die "TIMEOUT\n" }; # N.B. \n required
eval {
alarm($seconds);
... code to execute with timeout here (which may die) ...
1;
} or $failed = 1;
# outer eval catches alarm that might fire JUST before this alarm(0)
alarm(0); # cancel alarm (if code ran fast)
die "$@" if $failed;
1;
} or $failed = 1;
if ( $failed ) {
if ( defined $@ and $@ eq "TIMEOUT\n" ) { ... }
else { ... } # some other error
}
The first (outer) eval is used to avoid the unlikely but possible
chance that the "code to execute" dies and the alarm fires before it
is cancelled. Without the outer eval, if this happened your program
will die if you have no ALRM handler or a non-local alarm handler
will be called.
Unfortunately, as described above, this won't always work as expected,
depending on your perl version and the underlying database code.
With Oracle for instance (DBD::Oracle), if the system which hosts
the database is down the DBI->connect() call will hang for several
minutes before returning an error.
=back
The solution on these systems is to use the C<POSIX::sigaction()>
routine to gain low level access to how the signal handler is installed.
The code would look something like this (for the DBD-Oracle connect()):
use POSIX qw(:signal_h);
my $mask = POSIX::SigSet->new( SIGALRM ); # signals to mask in the handler
my $action = POSIX::SigAction->new(
sub { die "connect timeout\n" }, # the handler code ref
$mask,
# not using (perl 5.8.2 and later) 'safe' switch or sa_flags
);
my $oldaction = POSIX::SigAction->new();
sigaction( SIGALRM, $action, $oldaction );
my $dbh;
my $failed;
eval {
eval {
alarm(5); # seconds before time out
$dbh = DBI->connect("dbi:Oracle:$dsn" ... );
1;
} or $failed = 1;
alarm(0); # cancel alarm (if connect worked fast)
die "$@\n" if $failed; # connect died
1;
} or $failed = 1;
sigaction( SIGALRM, $oldaction ); # restore original signal handler
if ( $failed ) {
if ( defined $@ and $@ eq "connect timeout\n" ) {...}
else { # connect died }
}
See previous example for the reasoning around the double eval.
Similar techniques can be used for canceling statement execution.
Unfortunately, this solution is somewhat messy, and it does I<not> work with
perl versions less than perl 5.8 where C<POSIX::sigaction()> appears to be broken.
For a cleaner implementation that works across perl versions, see Lincoln Baxter's
Sys::SigAction module at L<Sys::SigAction>.
The documentation for Sys::SigAction includes an longer discussion
of this problem, and a DBD::Oracle test script.
Be sure to read all the signal handling sections of the L<perlipc> manual.
And finally, two more points to keep firmly in mind. Firstly,
remember that what we've done here is essentially revert to old
style I<unsafe> handling of these signals. So do as little as
possible in the handler. Ideally just die(). Secondly, the handles
in use at the time the signal is handled may not be safe to use
afterwards.
=head2 Subclassing the DBI
DBI can be subclassed and extended just like any other object
oriented module. Before we talk about how to do that, it's important
to be clear about the various DBI classes and how they work together.
By default C<$dbh = DBI-E<gt>connect(...)> returns a $dbh blessed
into the C<DBI::db> class. And the C<$dbh-E<gt>prepare> method
returns an $sth blessed into the C<DBI::st> class (actually it
simply changes the last four characters of the calling handle class
to be C<::st>).
The leading 'C<DBI>' is known as the 'root class' and the extra
'C<::db>' or 'C<::st>' are the 'handle type suffixes'. If you want
to subclass the DBI you'll need to put your overriding methods into
the appropriate classes. For example, if you want to use a root class
of C<MySubDBI> and override the do(), prepare() and execute() methods,
then your do() and prepare() methods should be in the C<MySubDBI::db>
class and the execute() method should be in the C<MySubDBI::st> class.
To setup the inheritance hierarchy the @ISA variable in C<MySubDBI::db>
should include C<DBI::db> and the @ISA variable in C<MySubDBI::st>
should include C<DBI::st>. The C<MySubDBI> root class itself isn't
currently used for anything visible and so, apart from setting @ISA
to include C<DBI>, it can be left empty.
So, having put your overriding methods into the right classes, and
setup the inheritance hierarchy, how do you get the DBI to use them?
You have two choices, either a static method call using the name
of your subclass:
$dbh = MySubDBI->connect(...);
or specifying a C<RootClass> attribute:
$dbh = DBI->connect(..., { RootClass => 'MySubDBI' });
If both forms are used then the attribute takes precedence.
The only differences between the two are that using an explicit
RootClass attribute will a) make the DBI automatically attempt to load
a module by that name if the class doesn't exist, and b) won't call
your MySubDBI::connect() method, if you have one.
When subclassing is being used then, after a successful new
connect, the DBI->connect method automatically calls:
$dbh->connected($dsn, $user, $pass, \%attr);
The default method does nothing. The call is made just to simplify
any post-connection setup that your subclass may want to perform.
The parameters are the same as passed to DBI->connect.
If your subclass supplies a connected method, it should be part of the
MySubDBI::db package.
One more thing to note: you must let the DBI do the handle creation. If you
want to override the connect() method in your *::dr class then it must still
call SUPER::connect to get a $dbh to work with. Similarly, an overridden
prepare() method in *::db must still call SUPER::prepare to get a $sth.
If you try to create your own handles using bless() then you'll find the DBI
will reject them with an "is not a DBI handle (has no magic)" error.
Here's a brief example of a DBI subclass. A more thorough example
can be found in F<t/subclass.t> in the DBI distribution.
package MySubDBI;
use strict;
use DBI;
use vars qw(@ISA);
@ISA = qw(DBI);
package MySubDBI::db;
use vars qw(@ISA);
@ISA = qw(DBI::db);
sub prepare {
my ($dbh, @args) = @_;
my $sth = $dbh->SUPER::prepare(@args)
or return;
$sth->{private_mysubdbi_info} = { foo => 'bar' };
return $sth;
}
package MySubDBI::st;
use vars qw(@ISA);
@ISA = qw(DBI::st);
sub fetch {
my ($sth, @args) = @_;
my $row = $sth->SUPER::fetch(@args)
or return;
do_something_magical_with_row_data($row)
or return $sth->set_err(1234, "The magic failed", undef, "fetch");
return $row;
}
When calling a SUPER::method that returns a handle, be careful to
check the return value before trying to do other things with it in
your overridden method. This is especially important if you want to
set a hash attribute on the handle, as Perl's autovivification will
bite you by (in)conveniently creating an unblessed hashref, which your
method will then return with usually baffling results later on like
the error "dbih_getcom handle HASH(0xa4451a8) is not a DBI handle (has
no magic". It's best to check right after the call and return undef
immediately on error, just like DBI would and just like the example
above.
If your method needs to record an error it should call the set_err()
method with the error code and error string, as shown in the example
above. The error code and error string will be recorded in the
handle and available via C<$h-E<gt>err> and C<$DBI::errstr> etc.
The set_err() method always returns an undef or empty list as
appropriate. Since your method should nearly always return an undef
or empty list as soon as an error is detected it's handy to simply
return what set_err() returns, as shown in the example above.
If the handle has C<RaiseError>, C<PrintError>, or C<HandleError>
etc. set then the set_err() method will honour them. This means
that if C<RaiseError> is set then set_err() won't return in the
normal way but will 'throw an exception' that can be caught with
an C<eval> block.
You can stash private data into DBI handles
via C<$h-E<gt>{private_..._*}>. See the entry under L</ATTRIBUTES
COMMON TO ALL HANDLES> for info and important caveats.
=head2 Memory Leaks
When tracking down memory leaks using tools like L<Devel::Leak>
you'll find that some DBI internals are reported as 'leaking' memory.
This is very unlikely to be a real leak. The DBI has various caches to improve
performance and the apparrent leaks are simply the normal operation of these
caches.
The most frequent sources of the apparrent leaks are L</ChildHandles>,
L</prepare_cached> and L</connect_cached>.
For example http://stackoverflow.com/questions/13338308/perl-dbi-memory-leak
Given how widely the DBI is used, you can rest assured that if a new release of
the DBI did have a real leak it would be discovered, reported, and fixed
immediately. The leak you're looking for is probably elsewhere. Good luck!
=head1 TRACING
The DBI has a powerful tracing mechanism built in. It enables you
to see what's going on 'behind the scenes', both within the DBI and
the drivers you're using.
=head2 Trace Settings
Which details are written to the trace output is controlled by a
combination of a I<trace level>, an integer from 0 to 15, and a set
of I<trace flags> that are either on or off. Together these are known
as the I<trace settings> and are stored together in a single integer.
For normal use you only need to set the trace level, and generally
only to a value between 1 and 4.
Each handle has its own trace settings, and so does the DBI.
When you call a method the DBI merges the handles settings into its
own for the duration of the call: the trace flags of the handle are
OR'd into the trace flags of the DBI, and if the handle has a higher
trace level then the DBI trace level is raised to match it.
The previous DBI trace settings are restored when the called method
returns.
=head2 Trace Levels
Trace I<levels> are as follows:
0 - Trace disabled.
1 - Trace top-level DBI method calls returning with results or errors.
2 - As above, adding tracing of top-level method entry with parameters.
3 - As above, adding some high-level information from the driver
and some internal information from the DBI.
4 - As above, adding more detailed information from the driver.
This is the first level to trace all the rows being fetched.
5 to 15 - As above but with more and more internal information.
Trace level 1 is best for a simple overview of what's happening.
Trace levels 2 thru 4 a good choice for general purpose tracing.
Levels 5 and above are best reserved for investigating a specific
problem, when you need to see "inside" the driver and DBI.
The trace output is detailed and typically very useful. Much of the
trace output is formatted using the L</neat> function, so strings
in the trace output may be edited and truncated by that function.
=head2 Trace Flags
Trace I<flags> are used to enable tracing of specific activities
within the DBI and drivers. The DBI defines some trace flags and
drivers can define others. DBI trace flag names begin with a capital
letter and driver specific names begin with a lowercase letter, as
usual.
Currently the DBI defines these trace flags:
ALL - turn on all DBI and driver flags (not recommended)
SQL - trace SQL statements executed
(not yet implemented in DBI but implemented in some DBDs)
CON - trace connection process
ENC - trace encoding (unicode translations etc)
(not yet implemented in DBI but implemented in some DBDs)
DBD - trace only DBD messages
(not implemented by all DBDs yet)
TXN - trace transactions
(not implemented in all DBDs yet)
The L</parse_trace_flags> and L</parse_trace_flag> methods are used
to convert trace flag names into the corresponding integer bit flags.
=head2 Enabling Trace
The C<$h-E<gt>trace> method sets the trace settings for a handle
and C<DBI-E<gt>trace> does the same for the DBI.
In addition to the L</trace> method, you can enable the same trace
information, and direct the output to a file, by setting the
C<DBI_TRACE> environment variable before starting Perl.
See L</DBI_TRACE> for more information.
Finally, you can set, or get, the trace settings for a handle using
the C<TraceLevel> attribute.
All of those methods use parse_trace_flags() and so allow you set
both the trace level and multiple trace flags by using a string
containing the trace level and/or flag names separated by vertical
bar ("C<|>") or comma ("C<,>") characters. For example:
local $h->{TraceLevel} = "3|SQL|foo";
=head2 Trace Output
Initially trace output is written to C<STDERR>. Both the
C<$h-E<gt>trace> and C<DBI-E<gt>trace> methods take an optional
$trace_file parameter, which may be either the name of a file to be
opened by DBI in append mode, or a reference to an existing writable
(possibly layered) filehandle. If $trace_file is a filename,
and can be opened in append mode, or $trace_file is a writable
filehandle, then I<all> trace output (currently including that from
other handles) is redirected to that file. A warning is generated
if $trace_file can't be opened or is not writable.
Further calls to trace() without $trace_file do not alter where
the trace output is sent. If $trace_file is undefined, then
trace output is sent to C<STDERR> and, if the prior trace was opened with
$trace_file as a filename, the previous trace file is closed; if $trace_file was
a filehandle, the filehandle is B<not> closed.
B<NOTE>: If $trace_file is specified as a filehandle, the filehandle
should not be closed until all DBI operations are completed, or the
application has reset the trace file via another call to
C<trace()> that changes the trace file.
=head2 Tracing to Layered Filehandles
B<NOTE>:
=over 4
=item *
Tied filehandles are not currently supported, as
tie operations are not available to the PerlIO
methods used by the DBI.
=item *
PerlIO layer support requires Perl version 5.8 or higher.
=back
As of version 5.8, Perl provides the ability to layer various
"disciplines" on an open filehandle via the L<PerlIO> module.
A simple example of using PerlIO layers is to use a scalar as the output:
my $scalar = '';
open( my $fh, "+>:scalar", \$scalar );
$dbh->trace( 2, $fh );
Now all trace output is simply appended to $scalar.
A more complex application of tracing to a layered filehandle is the
use of a custom layer (I<Refer to >L<Perlio::via> I<for details
on creating custom PerlIO layers.>). Consider an application with the
following logger module:
package MyFancyLogger;
sub new
{
my $self = {};
my $fh;
open $fh, '>', 'fancylog.log';
$self->{_fh} = $fh;
$self->{_buf} = '';
return bless $self, shift;
}
sub log
{
my $self = shift;
return unless exists $self->{_fh};
my $fh = $self->{_fh};
$self->{_buf} .= shift;
#
# DBI feeds us pieces at a time, so accumulate a complete line
# before outputing
#
print $fh "At ", scalar localtime(), ':', $self->{_buf}, "\n" and
$self->{_buf} = ''
if $self->{_buf}=~tr/\n//;
}
sub close {
my $self = shift;
return unless exists $self->{_fh};
my $fh = $self->{_fh};
print $fh "At ", scalar localtime(), ':', $self->{_buf}, "\n" and
$self->{_buf} = ''
if $self->{_buf};
close $fh;
delete $self->{_fh};
}
1;
To redirect DBI traces to this logger requires creating
a package for the layer:
package PerlIO::via::MyFancyLogLayer;
sub PUSHED
{
my ($class,$mode,$fh) = @_;
my $logger;
return bless \$logger,$class;
}
sub OPEN {
my ($self, $path, $mode, $fh) = @_;
#
# $path is actually our logger object
#
$$self = $path;
return 1;
}
sub WRITE
{
my ($self, $buf, $fh) = @_;
$$self->log($buf);
return length($buf);
}
sub CLOSE {
my $self = shift;
$$self->close();
return 0;
}
1;
The application can then cause DBI traces to be routed to the
logger using
use PerlIO::via::MyFancyLogLayer;
open my $fh, '>:via(MyFancyLogLayer)', MyFancyLogger->new();
$dbh->trace('SQL', $fh);
Now all trace output will be processed by MyFancyLogger's
log() method.
=head2 Trace Content
Many of the values embedded in trace output are formatted using the neat()
utility function. This means they may be quoted, sanitized, and possibly
truncated if longer than C<$DBI::neat_maxlen>. See L</neat> for more details.
=head2 Tracing Tips
You can add tracing to your own application code using the L</trace_msg> method.
It can sometimes be handy to compare trace files from two different runs of the
same script. However using a tool like C<diff> on the original log output
doesn't work well because the trace file is full of object addresses that may
differ on each run.
The DBI includes a handy utility called dbilogstrip that can be used to
'normalize' the log content. It can be used as a filter like this:
DBI_TRACE=2 perl yourscript.pl ...args1... 2>&1 | dbilogstrip > dbitrace1.log
DBI_TRACE=2 perl yourscript.pl ...args2... 2>&1 | dbilogstrip > dbitrace2.log
diff -u dbitrace1.log dbitrace2.log
See L<dbilogstrip> for more information.
=head1 DBI ENVIRONMENT VARIABLES
The DBI module recognizes a number of environment variables, but most of
them should not be used most of the time.
It is better to be explicit about what you are doing to avoid the need
for environment variables, especially in a web serving system where web
servers are stingy about which environment variables are available.
=head2 DBI_DSN
The DBI_DSN environment variable is used by DBI->connect if you do not
specify a data source when you issue the connect.
It should have a format such as "dbi:Driver:databasename".
=head2 DBI_DRIVER
The DBI_DRIVER environment variable is used to fill in the database
driver name in DBI->connect if the data source string starts "dbi::"
(thereby omitting the driver).
If DBI_DSN omits the driver name, DBI_DRIVER can fill the gap.
=head2 DBI_AUTOPROXY
The DBI_AUTOPROXY environment variable takes a string value that starts
"dbi:Proxy:" and is typically followed by "hostname=...;port=...".
It is used to alter the behaviour of DBI->connect.
For full details, see DBI::Proxy documentation.
=head2 DBI_USER
The DBI_USER environment variable takes a string value that is used as
the user name if the DBI->connect call is given undef (as distinct from
an empty string) as the username argument.
Be wary of the security implications of using this.
=head2 DBI_PASS
The DBI_PASS environment variable takes a string value that is used as
the password if the DBI->connect call is given undef (as distinct from
an empty string) as the password argument.
Be extra wary of the security implications of using this.
=head2 DBI_DBNAME (obsolete)
The DBI_DBNAME environment variable takes a string value that is used only when the
obsolescent style of DBI->connect (with driver name as fourth parameter) is used, and
when no value is provided for the first (database name) argument.
=head2 DBI_TRACE
The DBI_TRACE environment variable specifies the global default
trace settings for the DBI at startup. Can also be used to direct
trace output to a file. When the DBI is loaded it does:
DBI->trace(split /=/, $ENV{DBI_TRACE}, 2) if $ENV{DBI_TRACE};
So if C<DBI_TRACE> contains an "C<=>" character then what follows
it is used as the name of the file to append the trace to.
output appended to that file. If the name begins with a number
followed by an equal sign (C<=>), then the number and the equal sign are
stripped off from the name, and the number is used to set the trace
level. For example:
DBI_TRACE=1=dbitrace.log perl your_test_script.pl
On Unix-like systems using a Bourne-like shell, you can do this easily
on the command line:
DBI_TRACE=2 perl your_test_script.pl
See L</TRACING> for more information.
=head2 PERL_DBI_DEBUG (obsolete)
An old variable that should no longer be used; equivalent to DBI_TRACE.
=head2 DBI_PROFILE
The DBI_PROFILE environment variable can be used to enable profiling
of DBI method calls. See L<DBI::Profile> for more information.
=head2 DBI_PUREPERL
The DBI_PUREPERL environment variable can be used to enable the
use of DBI::PurePerl. See L<DBI::PurePerl> for more information.
=head1 WARNING AND ERROR MESSAGES
=head2 Fatal Errors
=over 4
=item Can't call method "prepare" without a package or object reference
The C<$dbh> handle you're using to call C<prepare> is probably undefined because
the preceding C<connect> failed. You should always check the return status of
DBI methods, or use the L</RaiseError> attribute.
=item Can't call method "execute" without a package or object reference
The C<$sth> handle you're using to call C<execute> is probably undefined because
the preceding C<prepare> failed. You should always check the return status of
DBI methods, or use the L</RaiseError> attribute.
=item DBI/DBD internal version mismatch
The DBD driver module was built with a different version of DBI than
the one currently being used. You should rebuild the DBD module under
the current version of DBI.
(Some rare platforms require "static linking". On those platforms, there
may be an old DBI or DBD driver version actually embedded in the Perl
executable being used.)
=item DBD driver has not implemented the AutoCommit attribute
The DBD driver implementation is incomplete. Consult the author.
=item Can't [sg]et %s->{%s}: unrecognised attribute
You attempted to set or get an unknown attribute of a handle. Make
sure you have spelled the attribute name correctly; case is significant
(e.g., "Autocommit" is not the same as "AutoCommit").
=back
=head1 Pure-Perl DBI
A pure-perl emulation of the DBI is included in the distribution
for people using pure-perl drivers who, for whatever reason, can't
install the compiled DBI. See L<DBI::PurePerl>.
=head1 SEE ALSO
=head2 Driver and Database Documentation
Refer to the documentation for the DBD driver that you are using.
Refer to the SQL Language Reference Manual for the database engine that you are using.
=head2 ODBC and SQL/CLI Standards Reference Information
More detailed information about the semantics of certain DBI methods
that are based on ODBC and SQL/CLI standards is available on-line
via microsoft.com, for ODBC, and www.jtc1sc32.org for the SQL/CLI
standard:
DBI method ODBC function SQL/CLI Working Draft
---------- ------------- ---------------------
column_info SQLColumns Page 124
foreign_key_info SQLForeignKeys Page 163
get_info SQLGetInfo Page 214
primary_key_info SQLPrimaryKeys Page 254
table_info SQLTables Page 294
type_info SQLGetTypeInfo Page 239
statistics_info SQLStatistics
To find documentation on the ODBC function you can use
the MSDN search facility at:
http://msdn.microsoft.com/Search
and search for something like C<"SQLColumns returns">.
And for SQL/CLI standard information on SQLColumns you'd read page 124 of
the (very large) SQL/CLI Working Draft available from:
http://jtc1sc32.org/doc/N0701-0750/32N0744T.pdf
=head2 Standards Reference Information
A hyperlinked, browsable version of the BNF syntax for SQL92 (plus
Oracle 7 SQL and PL/SQL) is available here:
http://cui.unige.ch/db-research/Enseignement/analyseinfo/SQL92/BNFindex.html
You can find more information about SQL standards online by searching for the
appropriate standard names and numbers. For example, searching for
"ANSI/ISO/IEC International Standard (IS) Database Language SQL - Part 1:
SQL/Framework" you'll find a copy at:
ftp://ftp.iks-jena.de/mitarb/lutz/standards/sql/ansi-iso-9075-1-1999.pdf
=head2 Books and Articles
Programming the Perl DBI, by Alligator Descartes and Tim Bunce.
L<http://books.perl.org/book/154>
Programming Perl 3rd Ed. by Larry Wall, Tom Christiansen & Jon Orwant.
L<http://books.perl.org/book/134>
Learning Perl by Randal Schwartz.
L<http://books.perl.org/book/101>
Details of many other books related to perl can be found at L<http://books.perl.org>
=head2 Perl Modules
Index of DBI related modules available from CPAN:
L<https://metacpan.org/search?q=DBD%3A%3A>
L<https://metacpan.org/search?q=DBIx%3A%3A>
L<https://metacpan.org/search?q=DBI>
For a good comparison of RDBMS-OO mappers and some OO-RDBMS mappers
(including Class::DBI, Alzabo, and DBIx::RecordSet in the former
category and Tangram and SPOPS in the latter) see the Perl
Object-Oriented Persistence project pages at:
http://poop.sourceforge.net
A similar page for Java toolkits can be found at:
http://c2.com/cgi-bin/wiki?ObjectRelationalToolComparison
=head2 Mailing List
The I<dbi-users> mailing list is the primary means of communication among
users of the DBI and its related modules. For details send email to:
L<dbi-users-help@perl.org>
There are typically between 700 and 900 messages per month. You have
to subscribe in order to be able to post. However you can opt for a
'post-only' subscription.
Mailing list archives (of variable quality) are held at:
http://groups.google.com/groups?group=perl.dbi.users
http://www.xray.mpe.mpg.de/mailing-lists/dbi/
http://www.mail-archive.com/dbi-users%40perl.org/
=head2 Assorted Related Links
The DBI "Home Page":
http://dbi.perl.org/
Other DBI related links:
http://www.perlmonks.org/?node=DBI%20recipes
http://www.perlmonks.org/?node=Speeding%20up%20the%20DBI
Other database related links:
http://www.connectionstrings.com/
Security, especially the "SQL Injection" attack:
http://bobby-tables.com/
http://online.securityfocus.com/infocus/1644
=head2 FAQ
See L<http://faq.dbi-support.com/>
=head1 AUTHORS
DBI by Tim Bunce, L<http://www.tim.bunce.name>
This pod text by Tim Bunce, J. Douglas Dunlop, Jonathan Leffler and others.
Perl by Larry Wall and the C<perl5-porters>.
=head1 COPYRIGHT
The DBI module is Copyright (c) 1994-2012 Tim Bunce. Ireland.
All rights reserved.
You may distribute under the terms of either the GNU General Public
License or the Artistic License, as specified in the Perl 5.10.0 README file.
=head1 SUPPORT / WARRANTY
The DBI is free Open Source software. IT COMES WITHOUT WARRANTY OF ANY KIND.
=head2 Support
My consulting company, Data Plan Services, offers annual and
multi-annual support contracts for the DBI. These provide sustained
support for DBI development, and sustained value for you in return.
Contact me for details.
=head2 Sponsor Enhancements
If your company would benefit from a specific new DBI feature,
please consider sponsoring its development. Work is performed
rapidly, and usually on a fixed-price payment-on-delivery basis.
Contact me for details.
Using such targeted financing allows you to contribute to DBI
development, and rapidly get something specific and valuable in return.
=head1 ACKNOWLEDGEMENTS
I would like to acknowledge the valuable contributions of the many
people I have worked with on the DBI project, especially in the early
years (1992-1994). In no particular order: Kevin Stock, Buzz Moschetti,
Kurt Andersen, Ted Lemon, William Hails, Garth Kennedy, Michael Peppler,
Neil S. Briscoe, Jeff Urlwin, David J. Hughes, Jeff Stander,
Forrest D Whitcher, Larry Wall, Jeff Fried, Roy Johnson, Paul Hudson,
Georg Rehfeld, Steve Sizemore, Ron Pool, Jon Meek, Tom Christiansen,
Steve Baumgarten, Randal Schwartz, and a whole lot more.
Then, of course, there are the poor souls who have struggled through
untold and undocumented obstacles to actually implement DBI drivers.
Among their ranks are Jochen Wiedmann, Alligator Descartes, Jonathan
Leffler, Jeff Urlwin, Michael Peppler, Henrik Tougaard, Edwin Pratomo,
Davide Migliavacca, Jan Pazdziora, Peter Haworth, Edmund Mergl, Steve
Williams, Thomas Lowery, and Phlip Plumlee. Without them, the DBI would
not be the practical reality it is today. I'm also especially grateful
to Alligator Descartes for starting work on the first edition of the
"Programming the Perl DBI" book and letting me jump on board.
The DBI and DBD::Oracle were originally developed while I was Technical
Director (CTO) of the Paul Ingram Group in the UK. So I'd especially like
to thank Paul for his generosity and vision in supporting this work for many years.
A couple of specific DBI features have been sponsored by enlightened companies:
The development of the swap_inner_handle() method was sponsored by BizRate.com (L<http://BizRate.com>)
The development of DBD::Gofer and related modules was sponsored by
Shopzilla.com (L<http://Shopzilla.com>), where I currently work.
=head1 CONTRIBUTING
As you can see above, many people have contributed to the DBI and
drivers in many ways over many years.
If you'd like to help then see L<http://dbi.perl.org/contributing>.
If you'd like the DBI to do something new or different then a good way
to make that happen is to do it yourself and send me a patch to the
source code that shows the changes. (But read "Speak before you patch"
below.)
=head2 Browsing the source code repository
Use https://github.com/perl5-dbi/dbi
=head2 How to create a patch using Git
The DBI source code is maintained using Git. To access the source
you'll need to install a Git client. Then, to get the source code, do:
git clone https://github.com/perl5-dbi/dbi.git DBI-git
The source code will now be available in the new subdirectory C<DBI-git>.
When you want to synchronize later, issue the command
git pull --all
Make your changes, test them, test them again until everything passes.
If there are no tests for the new feature you added or a behaviour change,
the change should include a new test. Then commit the changes. Either use
git gui
or
git commit -a -m 'Message to my changes'
If you get any conflicts reported you'll need to fix them first.
Then generate the patch file to be mailed:
git format-patch -1 --attach
which will create a file 0001-*.patch (where * relates to the commit message).
Read the patch file, as a sanity check, and then email it to dbi-dev@perl.org.
If you have a L<github|https://github.com> account, you can also fork the
repository, commit your changes to the forked repository and then do a
pull request.
=head2 How to create a patch without Git
Unpack a fresh copy of the distribution:
wget http://cpan.metacpan.org/authors/id/T/TI/TIMB/DBI-1.627.tar.gz
tar xfz DBI-1.627.tar.gz
Rename the newly created top level directory:
mv DBI-1.627 DBI-1.627.your_foo
Edit the contents of DBI-1.627.your_foo/* till it does what you want.
Test your changes and then remove all temporary files:
make test && make distclean
Go back to the directory you originally unpacked the distribution:
cd ..
Unpack I<another> copy of the original distribution you started with:
tar xfz DBI-1.627.tar.gz
Then create a patch file by performing a recursive C<diff> on the two
top level directories:
diff -purd DBI-1.627 DBI-1.627.your_foo > DBI-1.627.your_foo.patch
=head2 Speak before you patch
For anything non-trivial or possibly controversial it's a good idea
to discuss (on dbi-dev@perl.org) the changes you propose before
actually spending time working on them. Otherwise you run the risk
of them being rejected because they don't fit into some larger plans
you may not be aware of.
You can also reach the developers on IRC (chat). If they are on-line,
the most likely place to talk to them is the #dbi channel on irc.perl.org
=head1 TRANSLATIONS
A German translation of this manual (possibly slightly out of date) is
available, thanks to O'Reilly, at:
http://www.oreilly.de/catalog/perldbiger/
=head1 TRAINING
References to DBI related training resources. No recommendation implied.
http://www.treepax.co.uk/
http://www.keller.com/dbweb/
(If you offer professional DBI related training services,
please send me your details so I can add them here.)
=head1 OTHER RELATED WORK AND PERL MODULES
=over 4
=item L<Apache::DBI>
To be used with the Apache daemon together with an embedded Perl
interpreter like C<mod_perl>. Establishes a database connection which
remains open for the lifetime of the HTTP daemon. This way the CGI
connect and disconnect for every database access becomes superfluous.
=item SQL Parser
See also the L<SQL::Statement> module, SQL parser and engine.
=back
=cut
# LocalWords: DBI
Hacked By AnonymousFox1.0, Coded By AnonymousFox