Hacked By AnonymousFox

Gemfile(5) -- A format for describing gem dependencies for Ruby programs
========================================================================

## SYNOPSIS

A `Gemfile` describes the gem dependencies required to execute associated
Ruby code.

Place the `Gemfile` in the root of the directory containing the associated
code. For instance, in a Rails application, place the `Gemfile` in the same
directory as the `Rakefile`.

## SYNTAX

A `Gemfile` is evaluated as Ruby code, in a context which makes available
a number of methods used to describe the gem requirements.

## GLOBAL SOURCE

At the top of the `Gemfile`, add a single line for the `RubyGems` source that
contains the gems listed in the `Gemfile`.

    source "https://rubygems.org"

You can add only one global source. In Bundler 1.13, adding multiple global
sources was deprecated. The `source` `MUST` be a valid RubyGems repository.

To use more than one source of RubyGems, you should use [`source` block
](#BLOCK-FORM-OF-SOURCE-GIT-PATH-GROUP-and-PLATFORMS).

A source is checked for gems following the heuristics described in
[SOURCE PRIORITY][].

**Note about a behavior of the feature deprecated in Bundler 1.13**:
If a gem is found in more than one global source, Bundler
will print a warning after installing the gem indicating which source was used,
and listing the other sources where the gem is available. A specific source can
be selected for gems that need to use a non-standard repository, suppressing
this warning, by using the [`:source` option](#SOURCE) or `source` block.

### CREDENTIALS

Some gem sources require a username and password. Use [bundle config(1)](bundle-config.1.html) to set
the username and password for any of the sources that need it. The command must
be run once on each computer that will install the Gemfile, but this keeps the
credentials from being stored in plain text in version control.

    bundle config gems.example.com user:password

For some sources, like a company Gemfury account, it may be easier to
include the credentials in the Gemfile as part of the source URL.

    source "https://user:password@gems.example.com"

Credentials in the source URL will take precedence over credentials set using
`config`.

## RUBY

If your application requires a specific Ruby version or engine, specify your
requirements using the `ruby` method, with the following arguments.
All parameters are `OPTIONAL` unless otherwise specified.

### VERSION (required)

The version of Ruby that your application requires. If your application
requires an alternate Ruby engine, such as JRuby, TruffleRuby, etc., this
should be the Ruby version that the engine is compatible with.

    ruby "3.1.2"

### ENGINE

Each application _may_ specify a Ruby engine. If an engine is specified, an
engine version _must_ also be specified.

What exactly is an Engine?
  - A Ruby engine is an implementation of the Ruby language.

  - For background: the reference or original implementation of the Ruby
    programming language is called
    [Matz's Ruby Interpreter](https://en.wikipedia.org/wiki/Ruby_MRI), or  MRI
    for short. This is named after Ruby creator Yukihiro Matsumoto,
    also known as Matz. MRI is also known as CRuby, because it is written in C.
    MRI is the most widely used Ruby engine.

  - [Other implementations](https://www.ruby-lang.org/en/about/) of Ruby exist.
    Some of the more well-known implementations include
    [JRuby](http://jruby.org/) and [TruffleRuby](https://www.graalvm.org/ruby/).
    Rubinius is an alternative implementation of Ruby written in Ruby.
    JRuby is an implementation of Ruby on the JVM, short for Java Virtual Machine.
    TruffleRuby is a Ruby implementation on the GraalVM, a language toolkit built on the JVM.

### ENGINE VERSION

Each application _may_ specify a Ruby engine version. If an engine version is
specified, an engine _must_ also be specified. If the engine is "ruby" the
engine version specified _must_ match the Ruby version.

    ruby "2.6.8", engine: "jruby", engine_version: "9.3.8.0"

### PATCHLEVEL

Each application _may_ specify a Ruby patchlevel. Specifying the patchlevel has
been meaningless since Ruby 2.1.0 was released as the patchlevel is now
uniquely determined by a combination of major, minor, and teeny version numbers.

This option was implemented in Bundler 1.4.0 for Ruby 2.0 or earlier.

    ruby "3.1.2", patchlevel: "20"

## GEMS

Specify gem requirements using the `gem` method, with the following arguments.
All parameters are `OPTIONAL` unless otherwise specified.

### NAME (required)

For each gem requirement, list a single _gem_ line.

    gem "nokogiri"

### VERSION

Each _gem_ `MAY` have one or more version specifiers.

    gem "nokogiri", ">= 1.4.2"
    gem "RedCloth", ">= 4.1.0", "< 4.2.0"

### REQUIRE AS

Each _gem_ `MAY` specify files that should be used when autorequiring via
`Bundler.require`. You may pass an array with multiple files or `true` if the file
you want `required` has the same name as _gem_ or `false` to
prevent any file from being autorequired.

    gem "redis", require: ["redis/connection/hiredis", "redis"]
    gem "webmock", require: false
    gem "byebug", require: true

The argument defaults to the name of the gem. For example, these are identical:

    gem "nokogiri"
    gem "nokogiri", require: "nokogiri"
    gem "nokogiri", require: true

### GROUPS

Each _gem_ `MAY` specify membership in one or more groups. Any _gem_ that does
not specify membership in any group is placed in the `default` group.

    gem "rspec", group: :test
    gem "wirble", groups: [:development, :test]

The Bundler runtime allows its two main methods, `Bundler.setup` and
`Bundler.require`, to limit their impact to particular groups.

    # setup adds gems to Ruby's load path
    Bundler.setup                    # defaults to all groups
    require "bundler/setup"          # same as Bundler.setup
    Bundler.setup(:default)          # only set up the _default_ group
    Bundler.setup(:test)             # only set up the _test_ group (but `not` _default_)
    Bundler.setup(:default, :test)   # set up the _default_ and _test_ groups, but no others

    # require requires all of the gems in the specified groups
    Bundler.require                  # defaults to the _default_ group
    Bundler.require(:default)        # identical
    Bundler.require(:default, :test) # requires the _default_ and _test_ groups
    Bundler.require(:test)           # requires the _test_ group

The Bundler CLI allows you to specify a list of groups whose gems `bundle install` should
not install with the `without` configuration.

To specify multiple groups to ignore, specify a list of groups separated by spaces.

    bundle config set --local without test
    bundle config set --local without development test

Also, calling `Bundler.setup` with no parameters, or calling `require "bundler/setup"`
will setup all groups except for the ones you excluded via `--without` (since they
are not available).

Note that on `bundle install`, bundler downloads and evaluates all gems, in order to
create a single canonical list of all of the required gems and their dependencies.
This means that you cannot list different versions of the same gems in different
groups. For more details, see [Understanding Bundler](https://bundler.io/rationale.html).

### PLATFORMS

If a gem should only be used in a particular platform or set of platforms, you can
specify them. Platforms are essentially identical to groups, except that you do not
need to use the `--without` install-time flag to exclude groups of gems for other
platforms.

There are a number of `Gemfile` platforms:

  * `ruby`:
    C Ruby (MRI), Rubinius, or TruffleRuby, but not Windows
  * `mri`:
    C Ruby (MRI) only, but not Windows
  * `windows`:
    Windows C Ruby (MRI), including RubyInstaller 32-bit and 64-bit versions
  * `mswin`:
    Windows C Ruby (MRI), including RubyInstaller 32-bit versions
  * `mswin64`:
    Windows C Ruby (MRI), including RubyInstaller 64-bit versions
  * `rbx`:
    Rubinius
  * `jruby`:
    JRuby
  * `truffleruby`:
    TruffleRuby

On platforms `ruby`, `mri`, `mswin`, `mswin64`, and `windows`, you may
additionally specify a version by appending the major and minor version numbers
without a delimiter. For example, to specify that a gem should only be used on
platform `ruby` version 3.1, use:

    ruby_31

As with groups (above), you may specify one or more platforms:

    gem "weakling",   platforms: :jruby
    gem "ruby-debug", platforms: :mri_31
    gem "nokogiri",   platforms: [:windows_31, :jruby]

All operations involving groups ([`bundle install`](bundle-install.1.html), `Bundler.setup`,
`Bundler.require`) behave exactly the same as if any groups not
matching the current platform were explicitly excluded.

### FORCE_RUBY_PLATFORM

If you always want the pure ruby variant of a gem to be chosen over platform
specific variants, you can use the `force_ruby_platform` option:

    gem "ffi", force_ruby_platform: true

This can be handy (assuming the pure ruby variant works fine) when:

* You're having issues with the platform specific variant.
* The platform specific variant does not yet support a newer ruby (and thus has
  a `required_ruby_version` upper bound), but you still want your Gemfile{.lock}
  files to resolve under that ruby.

### SOURCE

You can select an alternate RubyGems repository for a gem using the ':source'
option.

    gem "some_internal_gem", source: "https://gems.example.com"

This forces the gem to be loaded from this source and ignores the global source
declared at the top level of the file. If the gem does not exist in this source,
it will not be installed.

Bundler will search for child dependencies of this gem by first looking in the
source selected for the parent, but if they are not found there, it will fall
back on the global source.

**Note about a behavior of the feature deprecated in Bundler 1.13**:
Selecting a specific source repository this way also suppresses the ambiguous
gem warning described above in [GLOBAL SOURCE](#GLOBAL-SOURCE).

Using the `:source` option for an individual gem will also make that source
available as a possible global source for any other gems which do not specify
explicit sources. Thus, when adding gems with explicit sources, it is
recommended that you also ensure all other gems in the Gemfile are using
explicit sources.

### GIT

If necessary, you can specify that a gem is located at a particular
git repository using the `:git` parameter. The repository can be accessed via
several protocols:

  * `HTTP(S)`:
    gem "rails", git: "https://github.com/rails/rails.git"
  * `SSH`:
    gem "rails", git: "git@github.com:rails/rails.git"
  * `git`:
    gem "rails", git: "git://github.com/rails/rails.git"

If using SSH, the user that you use to run `bundle install` `MUST` have the
appropriate keys available in their `$HOME/.ssh`.

`NOTE`: `http://` and `git://` URLs should be avoided if at all possible. These
protocols are unauthenticated, so a man-in-the-middle attacker can deliver
malicious code and compromise your system. HTTPS and SSH are strongly
preferred.

The `group`, `platforms`, and `require` options are available and behave
exactly the same as they would for a normal gem.

A git repository `SHOULD` have at least one file, at the root of the
directory containing the gem, with the extension `.gemspec`. This file
`MUST` contain a valid gem specification, as expected by the `gem build`
command.

If a git repository does not have a `.gemspec`, bundler will attempt to
create one, but it will not contain any dependencies, executables, or
C extension compilation instructions. As a result, it may fail to properly
integrate into your application.

If a git repository does have a `.gemspec` for the gem you attached it
to, a version specifier, if provided, means that the git repository is
only valid if the `.gemspec` specifies a version matching the version
specifier. If not, bundler will print a warning.

    gem "rails", "2.3.8", git: "https://github.com/rails/rails.git"
    # bundle install will fail, because the .gemspec in the rails
    # repository's master branch specifies version 3.0.0

If a git repository does `not` have a `.gemspec` for the gem you attached
it to, a version specifier `MUST` be provided. Bundler will use this
version in the simple `.gemspec` it creates.

Git repositories support a number of additional options.

  * `branch`, `tag`, and `ref`:
    You `MUST` only specify at most one of these options. The default
    is `branch: "master"`.  For example:

      gem "rails", git: "https://github.com/rails/rails.git", branch: "5-0-stable"

      gem "rails", git: "https://github.com/rails/rails.git", tag: "v5.0.0"

      gem "rails", git: "https://github.com/rails/rails.git", ref: "4aded"

  * `submodules`:
    For reference, a [git submodule](https://git-scm.com/book/en/v2/Git-Tools-Submodules)
    lets you have another git repository within a subfolder of your repository.
    Specify `submodules: true` to cause bundler to expand any
    submodules included in the git repository

If a git repository contains multiple `.gemspecs`, each `.gemspec`
represents a gem located at the same place in the file system as
the `.gemspec`.

    |~rails                   [git root]
    | |-rails.gemspec         [rails gem located here]
    |~actionpack
    | |-actionpack.gemspec    [actionpack gem located here]
    |~activesupport
    | |-activesupport.gemspec [activesupport gem located here]
    |...

To install a gem located in a git repository, bundler changes to
the directory containing the gemspec, runs `gem build name.gemspec`
and then installs the resulting gem. The `gem build` command,
which comes standard with Rubygems, evaluates the `.gemspec` in
the context of the directory in which it is located.

### GIT SOURCE

A custom git source can be defined via the `git_source` method. Provide the source's name
as an argument, and a block which receives a single argument and interpolates it into a
string to return the full repo address:

    git_source(:stash){ |repo_name| "https://stash.corp.acme.pl/#{repo_name}.git" }
    gem 'rails', stash: 'forks/rails'

In addition, if you wish to choose a specific branch:

    gem "rails", stash: "forks/rails", branch: "branch_name"

### GITHUB

`NOTE`: This shorthand should be avoided until Bundler 2.0, since it
currently expands to an insecure `git://` URL. This allows a
man-in-the-middle attacker to compromise your system.

If the git repository you want to use is hosted on GitHub and is public, you can use the
:github shorthand to specify the github username and repository name (without the
trailing ".git"), separated by a slash. If both the username and repository name are the
same, you can omit one.

    gem "rails", github: "rails/rails"
    gem "rails", github: "rails"

Are both equivalent to

    gem "rails", git: "https://github.com/rails/rails.git"

Since the `github` method is a specialization of `git_source`, it accepts a `:branch` named argument.

You can also directly pass a pull request URL:

    gem "rails", github: "https://github.com/rails/rails/pull/43753"

Which is equivalent to:

    gem "rails", github: "rails/rails", branch: "refs/pull/43753/head"

### GIST

If the git repository you want to use is hosted as a GitHub Gist and is public, you can use
the :gist shorthand to specify the gist identifier (without the trailing ".git").

    gem "the_hatch", gist: "4815162342"

Is equivalent to:

    gem "the_hatch", git: "https://gist.github.com/4815162342.git"

Since the `gist` method is a specialization of `git_source`, it accepts a `:branch` named argument.

### BITBUCKET

If the git repository you want to use is hosted on Bitbucket and is public, you can use the
:bitbucket shorthand to specify the bitbucket username and repository name (without the
trailing ".git"), separated by a slash. If both the username and repository name are the
same, you can omit one.

    gem "rails", bitbucket: "rails/rails"
    gem "rails", bitbucket: "rails"

Are both equivalent to

    gem "rails", git: "https://rails@bitbucket.org/rails/rails.git"

Since the `bitbucket` method is a specialization of `git_source`, it accepts a `:branch` named argument.

### PATH

You can specify that a gem is located in a particular location
on the file system. Relative paths are resolved relative to the
directory containing the `Gemfile`.

Similar to the semantics of the `:git` option, the `:path`
option requires that the directory in question either contains
a `.gemspec` for the gem, or that you specify an explicit
version that bundler should use.

Unlike `:git`, bundler does not compile C extensions for
gems specified as paths.

    gem "rails", path: "vendor/rails"

If you would like to use multiple local gems directly from the filesystem, you can set a global `path` option to the path containing the gem's files. This will automatically load gemspec files from subdirectories.

    path 'components' do
      gem 'admin_ui'
      gem 'public_ui'
    end

## BLOCK FORM OF SOURCE, GIT, PATH, GROUP and PLATFORMS

The `:source`, `:git`, `:path`, `:group`, and `:platforms` options may be
applied to a group of gems by using block form.

    source "https://gems.example.com" do
      gem "some_internal_gem"
      gem "another_internal_gem"
    end

    git "https://github.com/rails/rails.git" do
      gem "activesupport"
      gem "actionpack"
    end

    platforms :ruby do
      gem "ruby-debug"
      gem "sqlite3"
    end

    group :development, optional: true do
      gem "wirble"
      gem "faker"
    end

In the case of the group block form the :optional option can be given
to prevent a group from being installed unless listed in the `--with`
option given to the `bundle install` command.

In the case of the `git` block form, the `:ref`, `:branch`, `:tag`,
and `:submodules` options may be passed to the `git` method, and
all gems in the block will inherit those options.

The presence of a `source` block in a Gemfile also makes that source
available as a possible global source for any other gems which do not specify
explicit sources. Thus, when defining source blocks, it is
recommended that you also ensure all other gems in the Gemfile are using
explicit sources, either via source blocks or `:source` directives on
individual gems.

## INSTALL_IF

The `install_if` method allows gems to be installed based on a proc or lambda.
This is especially useful for optional gems that can only be used if certain
software is installed or some other conditions are met.

    install_if -> { RUBY_PLATFORM =~ /darwin/ } do
      gem "pasteboard"
    end

## GEMSPEC

The [`.gemspec`](http://guides.rubygems.org/specification-reference/) file is where
 you provide metadata about your gem to Rubygems. Some required Gemspec
 attributes include the name, description, and homepage of your gem. This is
 also where you specify the dependencies your gem needs to run.

If you wish to use Bundler to help install dependencies for a gem while it is
being developed, use the `gemspec` method to pull in the dependencies listed in
the `.gemspec` file.

The `gemspec` method adds any runtime dependencies as gem requirements in the
default group. It also adds development dependencies as gem requirements in the
`development` group. Finally, it adds a gem requirement on your project (`path:
'.'`). In conjunction with `Bundler.setup`, this allows you to require project
files in your test code as you would if the project were installed as a gem; you
need not manipulate the load path manually or require project files via relative
paths.

The `gemspec` method supports optional `:path`, `:glob`, `:name`, and `:development_group`
options, which control where bundler looks for the `.gemspec`, the glob it uses to look
for the gemspec (defaults to: "{,*,*/*}.gemspec"), what named `.gemspec` it uses
(if more than one is present), and which group development dependencies are included in.

When a `gemspec` dependency encounters version conflicts during resolution, the
local version under development will always be selected -- even if there are
remote versions that better match other requirements for the `gemspec` gem.

## SOURCE PRIORITY

When attempting to locate a gem to satisfy a gem requirement,
bundler uses the following priority order:

  1. The source explicitly attached to the gem (using `:source`, `:path`, or
     `:git`)
  2. For implicit gems (dependencies of explicit gems), any source, git, or path
     repository declared on the parent. This results in bundler prioritizing the
     ActiveSupport gem from the Rails git repository over ones from
     `rubygems.org`
  3. If neither of the above conditions are met, the global source will be used.
     If multiple global sources are specified, they will be prioritized from
     last to first, but this is deprecated since Bundler 1.13, so Bundler prints
     a warning and will abort with an error in the future.